Sangoma 6 to 7 Upgrade Tool Error
-
Any ideas?
[root@localhost ~]# distro-upgrade ┏━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┓ ┃ ┃ ┃ Sangoma 6 to 7 Upgrade Tool ┃ ┃ ┃ ┃ Distro Upgrade - Version 1802-2.sng7 ┃ ┃ Build Date: 2018-02-14 ┃ ┃ ┃ ┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┛ Checking prerequsites... Checking FreePBX Version [ ✔ ] - 13.0.194.2 Checking bitsize of machine [ ✔ ] - x86_64 Checking for 32 bit packages [ ✔ ] - No i686 rpms found Checking available disk space [ ✔ ] - 81G Available Checking for IonCube Loader [ ✔ ] - IonCube Loader not detected Checking for outdated system [ ✔ ] - No pending updates. Checking for HA Setup [ ✔ ] - Not a HA system All prerequsites passed! Are you ready to upgrade your machine to SNG7? This process requires two reboots, and will download approximately 400mb of files before starting. There will be no interruption to service until this machine is rebooted. Download files required for upgrade [Yn]? y ######### Starting setup upgrade on Thu Mar 8 17:32:31 EST 2018 ######### ######### An error occured, please check /var/log/sngupdate ######### Error! setup_upgrade did not exit cleanly. Not enabling upgrade service[root@localhost ~]# cat /var/log/sngupdate ######### Starting setup upgrade on Thu Mar 8 17:32:31 EST 2018 ######### ######### An error occured, please check /var/log/sngupdate ######### [root@localhost ~]# -
@aaronstuder said in Sangoma 6 to 7 Upgrade Tool Error:
/var/log/sngupdate
So the log it refers you to just says a generic error occurred? Ugh
-
That’s a low volume upgrade, bound to be a lot of snags
-
In other news, this is why I prefer Fedora over CentOS.
-
@aaronstuder said in Sangoma 6 to 7 Upgrade Tool Error:
Any ideas?
[root@localhost ~]# distro-upgrade ┏━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┓ ┃ ┃ ┃ Sangoma 6 to 7 Upgrade Tool ┃ ┃ ┃ ┃ Distro Upgrade - Version 1802-2.sng7 ┃ ┃ Build Date: 2018-02-14 ┃ ┃ ┃ ┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┛ Checking prerequsites... Checking FreePBX Version [ ✔ ] - 13.0.194.2 Checking bitsize of machine [ ✔ ] - x86_64 Checking for 32 bit packages [ ✔ ] - No i686 rpms found Checking available disk space [ ✔ ] - 81G Available Checking for IonCube Loader [ ✔ ] - IonCube Loader not detected Checking for outdated system [ ✔ ] - No pending updates. Checking for HA Setup [ ✔ ] - Not a HA system All prerequsites passed! Are you ready to upgrade your machine to SNG7? This process requires two reboots, and will download approximately 400mb of files before starting. There will be no interruption to service until this machine is rebooted. Download files required for upgrade [Yn]? y ######### Starting setup upgrade on Thu Mar 8 17:32:31 EST 2018 ######### ######### An error occured, please check /var/log/sngupdate ######### Error! setup_upgrade did not exit cleanly. Not enabling upgrade service[root@localhost ~]# cat /var/log/sngupdate ######### Starting setup upgrade on Thu Mar 8 17:32:31 EST 2018 ######### ######### An error occured, please check /var/log/sngupdate ######### [root@localhost ~]#Hahahahhaahahahah
-
No clue where to go with no good error log.
-
Guess I am just going to build a new 14 VM and transfer over the config. Any thing to watch for?
-
@aaronstuder said in Sangoma 6 to 7 Upgrade Tool Error:
Guess I am just going to build a new 14 VM and transfer over the config. Any thing to watch for?
You can export and import some things with the default handlers.
If you are using SSL from LE and have the Yelaink T4xG series phones they won't talk right using SSL.
If this is the same system I worked on, don't forget to grab crontab with the bell schedule. -
@jaredbusch said in Sangoma 6 to 7 Upgrade Tool Error:
@aaronstuder said in Sangoma 6 to 7 Upgrade Tool Error:
Guess I am just going to build a new 14 VM and transfer over the config. Any thing to watch for?
You can export and import some things with the default handlers.
If you are using SSL from LE and have the Yelaink T4xG series phones they won't talk right using SSL.
If this is the same system I worked on, don't forget to grab crontab with the bell schedule.It is in fact the same system. Will the custom extensions come over?
-
@aaronstuder said in Sangoma 6 to 7 Upgrade Tool Error:
@jaredbusch said in Sangoma 6 to 7 Upgrade Tool Error:
@aaronstuder said in Sangoma 6 to 7 Upgrade Tool Error:
Guess I am just going to build a new 14 VM and transfer over the config. Any thing to watch for?
You can export and import some things with the default handlers.
If you are using SSL from LE and have the Yelaink T4xG series phones they won't talk right using SSL.
If this is the same system I worked on, don't forget to grab crontab with the bell schedule.It is in fact the same system. Will the custom extensions come over?
Yes. they are still extensions.
