the missing VoIP, the ERP and the solution in search of a problem
-
@PSX_Defector said in the missing VoIP, the ERP and the solution in search of a problem:
@matteo-nunziati said in the missing VoIP, the ERP and the solution in search of a problem:
Is this going to kill my dog?
Are you a shithead, because in my experience only shitheads kill your dog.
what kind? Some could fit!is there a way to let our PBX silently pass external calls to the new VoIP PBX and let this manage the internal lines dedicated to customer care?
Depends. What you got? Newer PRI based PBX? Old ass key system? One of those Avaya IP Office boxes? Definity? Aspect?
Easiest would be an IAX trunk. Next would be a T1 bridge across. Bad would be piping 20/30 analog lines over to a Rhino breakout box.
EDIT
posted the wrong italian link, fixed now.Neglecting current setup (ISDNx4) we have one of this Aastra 400 PBX (pdf), which, theoretically, can be reconfigured itself for VoIP.
New virtual PBX is asterisk based, this is the only info I have currently.
networking-wise, I will need to double the current order for POE+ switches. wiring could turn into nightmare... or not, depending on the phone solution (some phones can act as a small managed switch, you plug your pc in).
Negecting certifications for a little moment, what about VoIP converters like these?
-
VoIP does not require PoE. PoE can be great of course, but you can use injectors wherever they make more sense.
-
Essentially all phones have switched in them so you can essentially always do that. I can't think of an example if someone lacking that feature.
-
@scottalanmiller of course, if a few phones will be moved to VoIP I will consider injectors, but if the entire network has to be redefined, POE+ switches turn to be cheaper and better manageable than ~40 local injectors.
-
@matteo-nunziati said in the missing VoIP, the ERP and the solution in search of a problem:
@scottalanmiller of course, if a few phones will be moved to VoIP I will consider injectors, but if the entire network has to be redefined, POE+ switches turn to be cheaper and better manageable than ~40 local injectors.
Yes, although it depends heavily on the phones that you choose. We used to buy phones that came with AC adapters in the box. So PoE was more expensive. These days, that is less and less common, but keep it in mind that the PoE might turn out to be purely an additional cost.
-
@scottalanmiller thanks for the hint!
-
@matteo-nunziati said in the missing VoIP, the ERP and the solution in search of a problem:
@scottalanmiller of course, if a few phones will be moved to VoIP I will consider injectors, but if the entire network has to be redefined, POE+ switches turn to be cheaper and better manageable than ~40 local injectors.
If you need new switches this can be a good excuse to do it. But as much as I hate to admit it the adapters can be far cheaper
-
@MattSpeller a number of new switches were in order, but if I have to revert ALL phones to LAN, well this more or less doubles our ports requirements, therefore the required switches.
-
@matteo-nunziati said in the missing VoIP, the ERP and the solution in search of a problem:
@MattSpeller a number of new switches were in order, but if I have to revert ALL phones to LAN, well this more or less doubles our ports requirements, therefore the required switches.
They do make phones with a built in switch, something to ponder perhaps. We have ancient Mitel phones that have a 100mb switch in them and they have been rock solid much to my surprise.
-
@MattSpeller yes, this is another option too but batch in order had not so many POE ports and nowdays most phones has POE. Anyway still waiting for a compatibility list, maybe we can simply go the AC adapter way.
-
@matteo-nunziati said in the missing VoIP, the ERP and the solution in search of a problem:
@MattSpeller yes, this is another option too but batch in order had not so many POE ports and nowdays most phones has POE. Anyway still waything for a compatibility list, maybe we can simply go the AC adapter way.
While it's still up in the air go check your network closet and make sure you have enough power to run enough PoE switches. This was the cause of an expensive visit from an electrician for us.
-
You need to stop worrying about additional cost, it's not your money. The company has decided, period. Use this as an opportunity to learn some new stuff. And if you have any influence in purchasing decisions, why won't you recommend switches that you want to play with? You're leaving in about a year, so why would you care if they buy POE switches or use power bricks.
-
And if they don't want to buy what is needed... they can sit around without working phones
-
@MattSpeller said in the missing VoIP, the ERP and the solution in search of a problem:
@matteo-nunziati said in the missing VoIP, the ERP and the solution in search of a problem:
@MattSpeller yes, this is another option too but batch in order had not so many POE ports and nowdays most phones has POE. Anyway still waything for a compatibility list, maybe we can simply go the AC adapter way.
While it's still up in the air go check your network closet and make sure you have enough power to run enough PoE switches. This was the cause of an expensive visit from an electrician for us.
Not a bad idea.
-
@MattSpeller said in the missing VoIP, the ERP and the solution in search of a problem:
@matteo-nunziati said in the missing VoIP, the ERP and the solution in search of a problem:
@MattSpeller a number of new switches were in order, but if I have to revert ALL phones to LAN, well this more or less doubles our ports requirements, therefore the required switches.
They do make phones with a built in switch, something to ponder perhaps. We have ancient Mitel phones that have a 100mb switch in them and they have been rock solid much to my surprise.
Most are GigE these days. But there are 100Mb/s ones lingering.
-
@MattSpeller we have production plants, electric power is the last problem. even the smallest closet is reached by ludicrous power with oversized cabling (just in case). I'm theoretically able to put a milling machine in any corner of the company (infact we have 6 of them).
but thanks for the hint! -
@marcinozga said in the missing VoIP, the ERP and the solution in search of a problem:
Use this as an opportunity to learn some new stuff.
impossible: the PBX is fully operated by the supplier. period. the only interesting thing was to understand how to not nuke a plant while introducing VoIP tech in it.
-
@matteo-nunziati said in the missing VoIP, the ERP and the solution in search of a problem:
@marcinozga said in the missing VoIP, the ERP and the solution in search of a problem:
Use this as an opportunity to learn some new stuff.
impossible: the PBX is fully operated by the supplier. period. the only interesting thing was to understand how to not nuke a plant while introducing VoIP tech in it.
Then it's just an opportunity to chill and enjoy having telephony off of your plate
-
@scottalanmiller said in the missing VoIP, the ERP and the solution in search of a problem:
@matteo-nunziati said in the missing VoIP, the ERP and the solution in search of a problem:
@marcinozga said in the missing VoIP, the ERP and the solution in search of a problem:
Use this as an opportunity to learn some new stuff.
impossible: the PBX is fully operated by the supplier. period. the only interesting thing was to understand how to not nuke a plant while introducing VoIP tech in it.
Then it's just an opportunity to chill and enjoy having telephony off of your plate
not the way I do things. usually I try to plan them. and I also tend to fail miserably. but at least I try to make a plan not buy a solution and then create a problem to apply it!
-
@StrongBad said in the missing VoIP, the ERP and the solution in search of a problem:
@MattSpeller said in the missing VoIP, the ERP and the solution in search of a problem:
@matteo-nunziati said in the missing VoIP, the ERP and the solution in search of a problem:
@MattSpeller a number of new switches were in order, but if I have to revert ALL phones to LAN, well this more or less doubles our ports requirements, therefore the required switches.
They do make phones with a built in switch, something to ponder perhaps. We have ancient Mitel phones that have a 100mb switch in them and they have been rock solid much to my surprise.
Most are GigE these days. But there are 100Mb/s ones lingering.
This is completely not true. Almost every manufacturer offers a gigabit model, but by far the most sold models are the fast ethernet because the price difference is generally 50 bucks.
