Correct Settings For Hosted FreePBX 13
-
@aaronstuder said in Correct Settings For Hosted FreePBX 13:
@bigbear said in Correct Settings For Hosted FreePBX 13:
Running a vultr $20 instance.
Why? o_0
Cause? What do you suggest?
-
@bigbear - What kind of firewall do you have at the remote site with the Yealinks? Perhaps SIP ALG needs to be disabled.
-
@bigbear said in Correct Settings For Hosted FreePBX 13:
//well, I cant upload photos as it says I dont have a permission, so I created a google photos library...
You cannot attach pictures until you have a category selected.
I reported this on the NodeBB forum once and the response was lukewarm. May need to revisit that and make an actual bug report.
-
@bigbear said in Correct Settings For Hosted FreePBX 13:
@aaronstuder said in Correct Settings For Hosted FreePBX 13:
@bigbear said in Correct Settings For Hosted FreePBX 13:
Running a vultr $20 instance.
Why? o_0
Cause? What do you suggest?
How big is your deployment? That's huge.
-
@scottalanmiller said in Correct Settings For Hosted FreePBX 13:
@bigbear said in Correct Settings For Hosted FreePBX 13:
@aaronstuder said in Correct Settings For Hosted FreePBX 13:
@bigbear said in Correct Settings For Hosted FreePBX 13:
Running a vultr $20 instance.
Why? o_0
Cause? What do you suggest?
How big is your deployment? That's huge.
Only about 50 phones on this one. Maybe time to destroy and start over. I just disabled the firewall again and still getting offline peers. I feel like something is blacklisted from the beginning when was incorrectly placing the password in the yealink feilds. Switching to another yealink phone now...
I have this location currently running off a cyberlynk freepbx 12 install with no problems. Its some newer Linksys with all the junk (like SIP ALG) disabled. All the other phones here are registered to the Cyberlynk and working no problem for about a year.
Its the same cheap router setup I have at several other customers, no issues connecting to hosted FreePBX 12 on cyberlynk.
-
@JaredBusch said in Correct Settings For Hosted FreePBX 13:
@bigbear said in Correct Settings For Hosted FreePBX 13:
//well, I cant upload photos as it says I dont have a permission, so I created a google photos library...
You cannot attach pictures until you have a category selected.
I reported this on the NodeBB forum once and the response was lukewarm. May need to revisit that and make an actual bug report.
Ah, thanks for the heads up!
-
@bigbear said in Correct Settings For Hosted FreePBX 13:
@JaredBusch said in Correct Settings For Hosted FreePBX 13:
@bigbear said in Correct Settings For Hosted FreePBX 13:
//well, I cant upload photos as it says I dont have a permission, so I created a google photos library...
You cannot attach pictures until you have a category selected.
I reported this on the NodeBB forum once and the response was lukewarm. May need to revisit that and make an actual bug report.
Ah, thanks for the heads up!
only affects new topics, obviously.
-
This post is deleted! -
@bigbear said in Correct Settings For Hosted FreePBX 13:
Cause? What do you suggest?
512 should be plenty and it's only 2.50 a month
-
@bigbear said in Correct Settings For Hosted FreePBX 13:
I have configured everything as best as I can figure based on what I think the developers are intending to manipulate ipchains. My remote yealink thinks its registered, but it shows offline in reports - asterisk info - peers.
Start here
https://mangolassi.it/topic/12322/configure-the-freepbx-smart-firewallSince this is not a new install, goto this screen and click the button to rerun the wizard.
-
@aaronstuder I have been wondering that. Or least about a $5 or $10 vm, just scary given the current cost I am paying. $20 seems like such a deal.
Literally going to save thousands per month switching to Vultr from everything else we are doing.
-
@bigbear said in Correct Settings For Hosted FreePBX 13:
@scottalanmiller said in Correct Settings For Hosted FreePBX 13:
@bigbear said in Correct Settings For Hosted FreePBX 13:
@aaronstuder said in Correct Settings For Hosted FreePBX 13:
@bigbear said in Correct Settings For Hosted FreePBX 13:
Running a vultr $20 instance.
Why? o_0
Cause? What do you suggest?
How big is your deployment? That's huge.
Only about 50 phones on this one. Maybe time to destroy and start over. I just disabled the firewall again and still getting offline peers. I feel like something is blacklisted from the beginning when was incorrectly placing the password in the yealink feilds. Switching to another yealink phone now...
I have this location currently running off a cyberlynk freepbx 12 install with no problems. Its some newer Linksys with all the junk (like SIP ALG) disabled. All the other phones here are registered to the Cyberlynk and working no problem for about a year.
Its the same cheap router setup I have at several other customers, no issues connecting to hosted FreePBX 12 on cyberlynk.
You'll be okay with the $2.50 size as @aaronstuder said, but I'd splurge for the $5. Anything more than that is likely wasted. We've had bigger companies than you on 256MB for most of a decade without an issue.
-
@bigbear said in Correct Settings For Hosted FreePBX 13:
@scottalanmiller said in Correct Settings For Hosted FreePBX 13:
@bigbear said in Correct Settings For Hosted FreePBX 13:
@aaronstuder said in Correct Settings For Hosted FreePBX 13:
@bigbear said in Correct Settings For Hosted FreePBX 13:
Running a vultr $20 instance.
Why? o_0
Cause? What do you suggest?
How big is your deployment? That's huge.
Only about 50 phones on this one. Maybe time to destroy and start over. I just disabled the firewall again and still getting offline peers. I feel like something is blacklisted from the beginning when was incorrectly placing the password in the yealink feilds. Switching to another yealink phone now...
I have this location currently running off a cyberlynk freepbx 12 install with no problems. Its some newer Linksys with all the junk (like SIP ALG) disabled. All the other phones here are registered to the Cyberlynk and working no problem for about a year.
Its the same cheap router setup I have at several other customers, no issues connecting to hosted FreePBX 12 on cyberlynk.
How many concurrent calls are you going to average? Are you going to use any compression codecs?
Those are the reasons that could require more power. You can have 1000 extensions on a $2.50 install if the concurrent call count is low and you are using the default ulaw/alaw codecs.
-
@JaredBusch said in Correct Settings For Hosted FreePBX 13:
@bigbear said in Correct Settings For Hosted FreePBX 13:
I have configured everything as best as I can figure based on what I think the developers are intending to manipulate ipchains. My remote yealink thinks its registered, but it shows offline in reports - asterisk info - peers.
Start here
https://mangolassi.it/topic/12322/configure-the-freepbx-smart-firewallSince this is not a new install, goto this screen and click the button to rerun the wizard.
Actually this is a new install, but I will definitely re-run the wizard. Hooking up another phone now as I disabled the firewall and realized the phone still doesnt show up under peers, although it says its registered and my line buttons are green...
-
@bigbear said in Correct Settings For Hosted FreePBX 13:
@aaronstuder I have been wondering that. Or least about a $5 or $10 vm, just scary given the current cost I am paying. $20 seems like such a deal.
Sounds wasteful around here
-
@bigbear said in Correct Settings For Hosted FreePBX 13:
@JaredBusch said in Correct Settings For Hosted FreePBX 13:
@bigbear said in Correct Settings For Hosted FreePBX 13:
I have configured everything as best as I can figure based on what I think the developers are intending to manipulate ipchains. My remote yealink thinks its registered, but it shows offline in reports - asterisk info - peers.
Start here
https://mangolassi.it/topic/12322/configure-the-freepbx-smart-firewallSince this is not a new install, goto this screen and click the button to rerun the wizard.
Actually this is a new install, but I will definitely re-run the wizard. Hooking up another phone now as I disabled the firewall and realized the phone still doesnt show up under peers, although it says its registered and my line buttons are green...
$5 says your local DHCP server is sending TFTP info and you are registering to your current system.
-
@bigbear here is the index to my guide if that helps.
https://mangolassi.it/topic/11805/freepbx-13-setup-guide -
this is completely wrong. You never want anything trusted except maybe one IP for access. Putting something in trusted defeats the purpose of the firewall.
That second line, you trusted the entire /24 that your office is on (the 70.60.148.0/24)? That is crazy, do you own the entire /24?
Why would you put in the unroutable class subnets as trusted when this is a hosted solution and everything will be connecting over the WAN IP and showing their public IP?
Then you put in your entire IPv6 subnets?
-
@JaredBusch said in Correct Settings For Hosted FreePBX 13:
@bigbear here is the index to my guide if that helps.
https://mangolassi.it/topic/11805/freepbx-13-setup-guide
Im gonna check DHCP but we dont use it typically. Will report back. However its fresh user accounts that arent duplicated from the old install.
-
@JaredBusch said in Correct Settings For Hosted FreePBX 13:
this is completely wrong. You never want anything trusted except maybe one IP for access. Putting something in trusted defeats the purpose of the firewall.
That second line, you trusted the entire /24 that your office is on (the 70.60.148.0/24)? That is crazy, do you own the entire /24?
Why would you put in the unroutable class subnets as trusted when this is a hosted solution and everything will be connecting over the WAN IP and showing their public IP?
Then you put in your entire IPv6 subnets?
LOL - I didnt enter any of those, but none of it looks right to me. I am just trying to do things the "freepbx responsive firewall way". However none of these would be blocking me so I thought I would circle back to it later.
