Installing Snipe-IT on CentOS 7 and MariaDB

Romo

@hobbit666 You can use either way, they both accomplish the same thing that is downloading the newest source files.

Step 1: Backup your database
While logged in, go to Admin > Backups and generate a new backup. Download that file and keep it somewhere safe, in case you need to restore back to that version if something goes wrong with your upgrade.

Step 2: Backup your old version
The easiest way to do this will be to just rename your old Snipe-IT install directory and create a new, empty directory that uses the old directory name, but you can handle this any way that works for you.

For example, if your Snipe-IT was installed in /var/www/snipe-it, you could rename that directory to /var/www/snipe-it-backup and then create a new directory /var/www/snipe-it.

Step 3: Download/clone the new release
Download the zip from: https://github.com/snipe/snipe-it/archive/master.zip
or
git clone https://github.com/snipe/snipe-it.git

Step 4: Update dependencies
Whenever you pull down a new version, you should update the dependencies via Composer and dump the autoloader.

NOTE: Never run composer as a super-user or Administrator. Always run it as the user that owns the Snipe-IT files. Running composer as a super-user will break things in ways that will be difficult to debug later. Just don't do it.

1st you'll need to install composer into the directory if you don't have it installed globally:

cd <install-dir>
curl -sS https://getcomposer.org/installer | php

Noq update dependencies and dump the auto-loader.

php composer.phar install --no-dev --prefer-source
php composer.phar dump-autoload

Step 5: Copy over your configuration settings

IMPORTANT:
This step will only need to be done once, while upgrading to v3.0. Once you've upgraded to v3.0, you won't ever have to do this part again.

Open up your .env file in your new Snipe-IT install directory, and update the configuration placeholders you see there with the values you were previously using in your individual config files.

If you don't have a .env file, just copy the existing .env.example over to .env and use that:

cp .env.example .env

The files you'll be copying from are:

app/config/app.php
app/config/production/app.php
app/config/production/database.php
app/config/production/mail.php
app/config/production/session.php

New .env Setting	Old Config File	Old Config File Key	Notes
APP_ENV	N/A	N/A	Set to production
APP_DEBUG	`/app/config/production/app.php`	debug
APP_KEY	/app/config/production/app.php	key	Make SURE you keep this app key the same from your old version.
APP_URL	/app/config/production/app.php	url
APP_TIMEZONE	/app/config/app.php	timezone
APP_LOCALE	/app/config/app.php	locale
DB_CONNECTION	/app/config/production/database.php	default	This should be `mysql`
DB_HOST	/app/config/production/database.php	connections-> mysql-> host
DB_DATABASE	/app/config/production/database.php	connections-> mysql-> database
DB_USERNAME	/app/config/production/database.php	connections-> mysql-> username
DB_PASSWORD	/app/config/production/database.php	connections-> mysql-> password
DB_PREFIX	/app/config/production/database.php	connections-> mysql-> prefix
DB_DUMP_PATH	N/A	N/A	Path to your dabase dump binary (such as mysqldump)e.g. '/usr/local/bin'
MAIL_DRIVER	/app/config/production/mail.php	driver
MAIL_HOST	/app/config/production/mail.php	host
MAIL_PORT	/app/config/production/mail.php	port
MAIL_USERNAME	/app/config/production/mail.php	username
MAIL_PASSWORD	/app/config/production/mail.php	password
MAIL_ENCRYPTION	/app/config/production/mail.php	encryption
MAIL_FROM_ADDR	/app/config/production/mail.php	from->address
MAIL_FROM_NAME	/app/config/production/mail.php	from->name
IMAGE_LIB	N/A	N/A	Should be set to gd or imagick, depending on which library you have on your server.
SESSION_LIFETIME	/app/config/production/session.php	lifetime
EXPIRE_ON_CLOSE	/app/config/production/session.php	expire_on_close
ENCRYPT	N/A	N/A	Should be set to true if you wish to encrypt your cookies.
COOKIE_NAME	/app/config/production/session.php	cookie
COOKIE_DOMAIN	/app/config/production/session.php	domain
SECURE_COOKIES	/app/config/production/session.php	secure

Everything else in your .env can be left alone, as they are more advanced settings that are not commonly used.

Step 6: Move uploaded files and check permissions
Since Laravel's file structure has changed, you're going to need to move a few files around to make sure your uploaded files (logo, uploaded asset files, asset model files, etc) are in their new location.

cp ../snipe-it-backup/app/storage/dumps/* snipe-it/storage/app/backups/
cp ../snipe-it-backup/app/private_uploads/* snipe-it/storage/private_uploads/
cp ../snipe-it-backup/public/uploads/* snipe-it/public/uploads/

Also confirm that your entire storage directory (and subdirectories) is writable by the web server.

Step 7: Migrate the database
Always run your database migrations on any upgrade, as this will make sure your database schema is up to date with what the new code expected.

php artisan migrate

Forgetting to run these commands can mean your DB might end up out of sync with the new files you just pulled, or you may have some funky cached autoloader values.

It’s a good idea to get into the habit of running these every time you pull anything new down. If there are no database changes to migrate, it won't hurt anything to run migrations anyway, you’ll just see "Nothing to migrate".

Step 8: Launch Snipe-IT in a browser
You should be all set now, so just go to your old Snipe-IT URL and make sure everything is working.

hobbit666

@Romo said in Installing Snipe-IT on CentOS 7 and MariaDB:

@hobbit666 You can use either way, they both accomplish the same thing that is downloading the newest source files.

Step 1: Backup your database
While logged in, go to Admin > Backups and generate a new backup. Download that file and keep it somewhere safe, in case you need to restore back to that version if something goes wrong with your upgrade.

Thanks Romo will give it a try Monday/Tuesday

Chatigo

@NashBrydges Thanks a lot! its the first step by step for amateurs i had see,

rejivincentc

@scottalanmiller @brandon.hay I am getting the below error message... Please assist...

scottalanmiller

@rejivincentc welcome to the community.

rejivincentc

@scottalanmiller Thanks...

I managed to login the snipe-it after that the webpage is blank...

Please assist asap...

thwr

Thx for mentioning Snipe-IT, @scottalanmiller. Didn't follow your instructions, because the install script provided by Snipe worked like a charm.

The tool is great, I'm just missing a few things. For example

Licenses should be treated the same way as assets (Create a "template", create instances of that template).
Assets can't be checked out to other assets (Notebook docking station -> Notebook).
Components (or Accessories?) can't have vendors, which is a bit odd.
Components must have a minimum of 1 unused item or they will generate an alert otherwise. No I don't want to have 1 spare part of every little gadget
Does not handle floating licenses.
Licenses can't be upgraded (but you can assign two versions of the same software to the same machine / user which works just fine)
You can't modify software checkout dates via the GUI

But all in all, it's great. Simplifies tracking of assets and licenses.

scottalanmiller

@thwr said in Installing Snipe-IT on CentOS 7 and MariaDB:

Thx for mentioning Snipe-IT, @scottalanmiller. Didn't follow your instructions, because the install script provided by Snipe worked like a charm.

It's been a bit, they've changed a lot because their old script didn't install at all, hence these instructions. Which script did you use?

rejivincentc

@scottalanmiller Script used - yum -y install wget firewalld; setenforce 0 && yum -y install epel-release; mkdir -p /var/www/html; cd /var/www/html/; wget https://raw.githubusercontent.com/snipe/snipe-it/master/install.sh && chmod 744 install.sh && ./install.sh && cd snipeit; sed -i "s/'timezone' => '',/'timezone' => 'UTC',/" app/config/app.php; php artisan app:install; firewall-cmd --zone=public --add-port=80/tcp --permanent; firewall-cmd --reloadrpm

OS -Centos 7
snipe-it-3.4

thwr

@scottalanmiller said in Installing Snipe-IT on CentOS 7 and MariaDB:

@thwr said in Installing Snipe-IT on CentOS 7 and MariaDB:

Thx for mentioning Snipe-IT, @scottalanmiller. Didn't follow your instructions, because the install script provided by Snipe worked like a charm.

It's been a bit, they've changed a lot because their old script didn't install at all, hence these instructions. Which script did you use?

Will take a look on Tuesday. But it was the one provided in the github package.

Romo

@rejivincentc said in Installing Snipe-IT on CentOS 7 and MariaDB:

@scottalanmiller Script used - yum -y install wget firewalld; setenforce 0 && yum -y install epel-release; mkdir -p /var/www/html; cd /var/www/html/; wget https://raw.githubusercontent.com/snipe/snipe-it/master/install.sh && chmod 744 install.sh && ./install.sh && cd snipeit; sed -i "s/'timezone' => '',/'timezone' => 'UTC',/" app/config/app.php; php artisan app:install; firewall-cmd --zone=public --add-port=80/tcp --permanent; firewall-cmd --reloadrpm

OS -Centos 7
snipe-it-3.4

Just use the following and it will take you to a working install of Snipe-IT

wget https://raw.githubusercontent.com/snipe/snipe-it/master/install.sh
chmod 744 install.sh
./install.sh

JaredBusch

@Romo said in Installing Snipe-IT on CentOS 7 and MariaDB:

Just use the following and it will take you to a working install of Snipe-IT

Not when this was originally wrote.

scottalanmiller

@Romo said in Installing Snipe-IT on CentOS 7 and MariaDB:

@rejivincentc said in Installing Snipe-IT on CentOS 7 and MariaDB:

@scottalanmiller Script used - yum -y install wget firewalld; setenforce 0 && yum -y install epel-release; mkdir -p /var/www/html; cd /var/www/html/; wget https://raw.githubusercontent.com/snipe/snipe-it/master/install.sh && chmod 744 install.sh && ./install.sh && cd snipeit; sed -i "s/'timezone' => '',/'timezone' => 'UTC',/" app/config/app.php; php artisan app:install; firewall-cmd --zone=public --add-port=80/tcp --permanent; firewall-cmd --reloadrpm

OS -Centos 7
snipe-it-3.4

Just use the following and it will take you to a working install of Snipe-IT
wget https://raw.githubusercontent.com/snipe/snipe-it/master/install.sh
chmod 744 install.sh
./install.sh

Big changes from how it was before. Glad to see that they've made so much progress.

tiagom

The install script works great. The stuff the tripped me up I submitted a PR to correct.

Im still transitioning over, i currently have about 30% of my assets in there.

rejivincentc

@scottalanmiller said in Installing Snipe-IT on CentOS 7 and MariaDB:

se the following and it will take you to a working install of S

Thanks

scottalanmiller

@rejivincentc said in Installing Snipe-IT on CentOS 7 and MariaDB:

@scottalanmiller said in Installing Snipe-IT on CentOS 7 and MariaDB:

se the following and it will take you to a working install of S

Thanks

Glad that it is working!

Robblehead

so thankful I ran across this article, much more helpful then the snipe-it documentation. I am trying to do the CentOS 7 install method and have tried the single line Scott showed and the wget line that was confirmed working. Everything installs fine but when I enter the IP address/hostname nothing loads, I then open up the firewall to port 80 and the IP address will redirect to the hostname/setup but I receive a "This site can't be reached" I have literally spent 4 hours trying different things with no luck, the server DNS address could not be found is what I am seeing now.
Please help!!! lol

rejivincentc

@Robblehead Hi,
Please try this one...

setenforce 0
mkdir -p /var/www/html; cd /var/www/html/
wget https://raw.githubusercontent.com/snipe/snipe-it/master/install.sh
chmod 744 install.sh
./install.sh

scottalanmiller

Did @rejivincentc update work for you?

Robblehead

@scottalanmiller I will test this afternoon and let you guys know, appreciate the help