Domain Controller Down (VM)
-
-
@JaredBusch said in Domain Controller Down (VM):
@wirestyle22 said in Domain Controller Down (VM):
@Dashrender said in Domain Controller Down (VM):
@wirestyle22 said in Domain Controller Down (VM):
@JaredBusch said in Domain Controller Down (VM):
@wirestyle22 said in Domain Controller Down (VM):
Didn't allow me to access it
DId you try by DNS name? that won't work.
\\192.168.10.X\c$not `\server2008\c$I'm really distracted and I apologize guys. There are way too many people around me currently. I can access the sysvol folder
probably not in a write-able fashion though. so no good
so \192.168.10.x\c$ doesn't prompt you for a password of a network admin.
no it doesn't
So seriously, at this point, just reboot the host. You have no access to the proper tools and no way to change anything.
Well still before this, i'd change the DNS of the 2008 server and try to download the installer
-
DO you have an office, a cubicle? Put up a sign that says that there is an outage and you are working on it and ANY interruption will stop you from working on it. So only interrupt if what you need is more important than fixing the servers and are prepared to report such to management.
-
@scottalanmiller said in Domain Controller Down (VM):
DO you have an office, a cubicle? Put up a sign that says that there is an outage and you are working on it and ANY interruption will stop you from working on it. So only interrupt if what you need is more important than fixing the servers and are prepared to report such to management.
I'm in the server room. Virtually no one has the key thank god.
-
@wirestyle22 said in Domain Controller Down (VM):
@scottalanmiller said in Domain Controller Down (VM):
DO you have an office, a cubicle? Put up a sign that says that there is an outage and you are working on it and ANY interruption will stop you from working on it. So only interrupt if what you need is more important than fixing the servers and are prepared to report such to management.
I'm in the server room. Virtually no one has the key thank god.
Still, a sign is good
-
@wirestyle22 said in Domain Controller Down (VM):
@scottalanmiller said in Domain Controller Down (VM):
DO you have an office, a cubicle? Put up a sign that says that there is an outage and you are working on it and ANY interruption will stop you from working on it. So only interrupt if what you need is more important than fixing the servers and are prepared to report such to management.
I'm in the server room. Virtually no one has the key thank god.
rebooting from the console?
-
Same situation after reboot. Tested from the other host next to it, exact same situation. Cannot ping gateway etc
-
@wirestyle22 said in Domain Controller Down (VM):
Same situation after reboot. Tested from the other host next to it, exact same situation. Cannot ping gateway etc
what is the other host?
-
Reboot the network switch
-
@Dashrender said in Domain Controller Down (VM):
@wirestyle22 said in Domain Controller Down (VM):
Same situation after reboot. Tested from the other host next to it, exact same situation. Cannot ping gateway etc
what is the other host?
I have ESX01 and ESX02 in this particular building
-
@wirestyle22 said in Domain Controller Down (VM):
Same situation after reboot. Tested from the other host next to it, exact same situation. Cannot ping gateway etc
Are you able to ping the DC's IP or get into it via RDP now that you have rebooted ?
-
-
Assuming ESX01 is the one we have all the trouble accessing, can you connect the vSphere client to ESX02?
-
@JaredBusch said in Domain Controller Down (VM):
Assuming ESX01 is the one we have all the trouble accessing, can you connect the vSphere client to ESX02?
I actually can access ESX02. This was not the case before I rebooted.
-
@JaredBusch Actually, totally randomly it's working now. I'm at a loss. I can remote into either of them now.
-
So is the switch rebooted? any change?
-
@Dashrender view above
-
did you reboot the switch?
-
@Dashrender yes
-
I bet your switch locked something out. or it was locked up.
