Ubiquiti Edge Router X questions.
-
I'll be buying one shortly, so watching this thread.
(And re-reading all the previous ones.)
-
Yes, you can power the unit with the same PoE injector. The ER-X does a passthrough only. It does not actually provide power to an AP itself. It simply siphons off power from the injector to power itself.
Yes there is a dual WAN wizard.
Yes in the current firmware (1.8.5), you can setup some QoS in the GUI. This was new in 1.8.0.
-
Just bought one Edge Router POE + one Unifi AP: that's fast! Love the CLI!
-
@JaredBusch said in Ubiquiti Edge Router X questions.:
Yes, you can power the unit with the same PoE injector. The ER-X does a passthrough only. It does not actually provide power to an AP itself. It simply siphons off power from the injector to power itself.
Yes there is a dual WAN wizard.
Yes in the current firmware (1.8.5), you can setup some QoS in the GUI. This was new in 1.8.0.
Thanks @JaredBusch, always nice to have someone confirm everything will work like you think.
-
Went and got about halfway through the config for the guy I know who already bought one this afternoon. I like it enough that I'm going to recommend the purchase tomorrow.... they haven't said no yet when I've asked for money, and $50 isn't much for what it does.
Has anyone seen the new 10gbit, 12sfp + 4copper one for $600? Does any other vendor even touch that on 10gig equipment?
-
@travisdh1 said in Ubiquiti Edge Router X questions.:
Has anyone seen the new 10gbit, 12sfp + 4copper one for $600? Does any other vendor even touch that on 10gig equipment?
That's amazing. And no.
-
@scottalanmiller said in Ubiquiti Edge Router X questions.:
@travisdh1 said in Ubiquiti Edge Router X questions.:
Has anyone seen the new 10gbit, 12sfp + 4copper one for $600? Does any other vendor even touch that on 10gig equipment?
That's amazing. And no.
I spotted it somewhere on a spiceworks thread, and lost it since
-
-
@travisdh1 said in Ubiquiti Edge Router X questions.:
Found it! https://community.spiceworks.com/topic/1751826-edgeswitch?page=1#entry-6081640
That's cool!
-
@coliver said in Ubiquiti Edge Router X questions.:
@travisdh1 said in Ubiquiti Edge Router X questions.:
Found it! https://community.spiceworks.com/topic/1751826-edgeswitch?page=1#entry-6081640
That's cool!
B+H has them available: http://www.bhphotovideo.com/c/product/1267265-REG/ubiquiti_networks_es_16_xg_edgeswitch_16_10g.html
Well, I think Ubiquiti just found a way into the switch market.
-
@travisdh1 said in Ubiquiti Edge Router X questions.:
@coliver said in Ubiquiti Edge Router X questions.:
@travisdh1 said in Ubiquiti Edge Router X questions.:
Found it! https://community.spiceworks.com/topic/1751826-edgeswitch?page=1#entry-6081640
That's cool!
B+H has them available: http://www.bhphotovideo.com/c/product/1267265-REG/ubiquiti_networks_es_16_xg_edgeswitch_16_10g.html
Well, I think Ubiquiti just found a way into the switch market.
They've had some really competitive edge switches in the past. This would be a decent trunk or backbone switch... for significantly less then anyone else on the market.
-
Got one sat at home with a AC Lite and Draytek V130 to be set-up.
Just need some time to play with the setup. (hopefully in a few weeks) -
@travisdh1 said in Ubiquiti Edge Router X questions.:
Found it! https://community.spiceworks.com/topic/1751826-edgeswitch?page=1#entry-6081640
Thats pretty sweet.
-
@tiagom said in Ubiquiti Edge Router X questions.:
@travisdh1 said in Ubiquiti Edge Router X questions.:
Found it! https://community.spiceworks.com/topic/1751826-edgeswitch?page=1#entry-6081640
Thats pretty sweet.
The EdgeSwitch line is certainly filling out to a full line for the basic options they released with a year ago.
-
Apparently I figured out my issue with the dual wan traffic shaping. Had to turn on stickiness.... just goes to show you how little I've dealt with networking.
