Linux Installation Issues
-
as this is a laptop the uefi/bios options might be limited, but are you able to change the sata mode to/from ide/ahci? what about disabling or enabling legacy usb support? Not even sure those are options anymore in uefi.
-
@coliver said in Linux Installation Issues:
Did you check the MD5 hash to make sure it matches?
No, but I'm using a lot of different images and they are all the same.
-
@momurda said in Linux Installation Issues:
as this is a laptop the uefi/bios options might be limited, but are you able to change the sata mode to/from ide/ahci? what about disabling or enabling legacy usb support? Not even sure those are options anymore in uefi.
Not, doesn't let me change that.
-
Have you tried this grub kernel parameter?
modprobe.blacklist=nouveau i915.preliminary_hw_support=1 -
@StrongBad said in Linux Installation Issues:
Have you tried this grub kernel parameter?
modprobe.blacklist=nouveau i915.preliminary_hw_support=1testing....
-
I'll try installing Mint to USB from my RoG tonight and see how it goes.
-
No luck there. Same basic issues.
-
Are you able to see the errors and things while it is booting? Not trying to teach you linux, but if you hit F12 while Mint is booting it shows you all its messages, services starting, driver detection all that, instead of a useless(in this case at least) Mint logo.
-
@momurda said in Linux Installation Issues:
Are you able to see the errors and things while it is booting? Not trying to teach you linux, but if you hit F12 while Mint is booting it shows you all its messages, services starting, driver detection all that, instead of a useless(in this case at least) Mint logo.
F12 doesn't work on Mint on this laptop during boot, believe it or not. One more pain in the process.
-
Replace user, reboot computer.
-
@scottalanmiller are you following a guide or just doing this willy nilly?
-
For a useful suggestion - did the drive come partitioned? Perhaps blow it away with DD, at least a GB or two
-
Here's a guide @scottalanmiller
-
Reason I ask is because you need to disable secure boot control and pxe oprom while enabling CSM. I don't want to assume you didnt, but outside of this I have no idea what would cause what you are running into.
-
@wirestyle22 said in Linux Installation Issues:
@scottalanmiller are you following a guide or just doing this willy nilly?
Following a guide? There is no guide for installing to Asus ROG. If there was, I'd be following it. Like any OS install, you just try and see what fails.
-
@wirestyle22 said in Linux Installation Issues:
Reason I ask is because you need to disable secure boot control and pxe oprom while enabling CSM. I don't want to assume you didnt, but outside of this I have no idea what would cause what you are running into.
People using Asus ROG that claim to have it working say the opposite. There is no consensus.
-
@MattSpeller said in Linux Installation Issues:
For a useful suggestion - did the drive come partitioned? Perhaps blow it away with DD, at least a GB or two
Yes, but we aren't close to needing to write to the drive yet, we can't boot the kernel. How do we run DD when you can't boot yet?
-
@scottalanmiller I can't vouch for them
I'd try it. -
@scottalanmiller said in Linux Installation Issues:
@MattSpeller said in Linux Installation Issues:
For a useful suggestion - did the drive come partitioned? Perhaps blow it away with DD, at least a GB or two
Yes, but we aren't close to needing to write to the drive yet, we can't boot the kernel. How do we run DD when you can't boot yet?
Are you getting a
grub>>prompt, or a normal shell? If you're into a normal shell, it's gotten past boot, but is not getting into the installer from busybox.
-
@wirestyle22 said in Linux Installation Issues:
@scottalanmiller I can't vouch for them
I'd try it.20+ minutes per boot test, sadly.
