What You Need to Know About XenServer
-
@olivier said in What You Need to Know About XenServer:
@DustinB3403 That's exactly what I've done with one client, and I'm stopping there.
Ah, I misunderstood your last post, I thought it was theoretical
-
@DustinB3403 No that was real ^^
-
@JaredBusch said in What You Need to Know About XenServer:
My biggest complaint with XS is not having any simple method to attach a local ISO repository. Horribly critical flaw (not really).
I completely agree.
-
"Use your RAID card to expose to logical volumes (disks) to XS directly. Give it one small one, like 70GB, for XenServer itself. And all the rest for the SR (VM storage.) [If you lack this functionality or are not familiar with this process, post a question here in ML and include the RAID controller that you are using so that we can assist!]"
Hi! So I have a Dell PERC H700. Looked around inside of the PERC settings and didn't see a way to do this. Any help would be greatly appreciated.
-
@wirestyle22 said in What You Need to Know About XenServer:
"Use your RAID card to expose to logical volumes (disks) to XS directly. Give it one small one, like 70GB, for XenServer itself. And all the rest for the SR (VM storage.) [If you lack this functionality or are not familiar with this process, post a question here in ML and include the RAID controller that you are using so that we can assist!]"
Hi! So I have a Dell PERC H700. Looked around inside of the PERC settings and didn't see a way to do this. Any help would be greatly appreciated.
Looking through the H700 manual, it does not appear to support logical volumes on the RAID card.
-
@scottalanmiller said in What You Need to Know About XenServer:
@wirestyle22 said in What You Need to Know About XenServer:
"Use your RAID card to expose to logical volumes (disks) to XS directly. Give it one small one, like 70GB, for XenServer itself. And all the rest for the SR (VM storage.) [If you lack this functionality or are not familiar with this process, post a question here in ML and include the RAID controller that you are using so that we can assist!]"
Hi! So I have a Dell PERC H700. Looked around inside of the PERC settings and didn't see a way to do this. Any help would be greatly appreciated.
Looking through the H700 manual, it does not appear to support logical volumes on the RAID card.
Good to know it's not me. Thanks!
-
What I ended up doing (though I didn't use it, used USB/SD which I am looking to move away from) was just setting up two small disks as a separate RAID1 array just for the boot device.
$140ish from xByte so not crazy expensive.
-
@BRRABill I like use refurb parts for that, like https://www.servershop24.de/en/components/controller/sas/hp-smart-array-p400-raid-controller-256-mb-sas-pci-e-447029-001-low-profile/a-105422/
Unbeatable price/perf ratio.
-
@BRRABill I did run into complications while trying to create an ISO Library. It seems pretty unintuitive to me.
mkdir -p /var/opt/xen/ISO_Libxe sr-create name-label=LocalISO type=iso device-config:location=/var/opt/xen/ISO_Store device-config:legacy_mode=true content-type=isocd /var/opt/xen/ISO_LibI then ran into issues locating the actual link so I could
wgetI found this one eventually:
http://care.dlservice.microsoft.com/download/7/5/E/75EC4E54-5B02-42D6-8879-D8D3A25FBEF7/7601.17514.101119-1850_x64fre_server_eval_en-us-GRMSXEVAL_EN_DVD.iso?lcid=1033&cprod=WinSvr2I didn't see any failure notifications. However, there was also no ISO's listed in the library.
I ran
df -hto find disk usage and it didn't have enough space so I switched to my 8 TB GPT Partition.cd /var/run/sr-mount/etc etc etc code/Then I went through the process of creating another directory. I moved it to the new ISO_Lib folder and ran this:
xe sr-create name-label=ISO_Lib type=iso device-config:location=/var/run/sr-mount/etc etc etc code/ISO_Storage device-config:legacy_mode=true content-type=isoTo make it an ISO library. Nothing is listed in there. Is it me or this so much just to create local storage?
-
@wirestyle22 said in What You Need to Know About XenServer:
@BRRABill I did run into complications while trying to create an ISO Library. It seems pretty unintuitive to me.
mkdir -p /var/opt/xen/ISO_Libxe sr-create name-label=LocalISO type=iso device-config:location=/var/opt/xen/ISO_Store device-config:legacy_mode=true content-type=isocd /var/opt/xen/ISO_LibI then ran into issues locating the actual link so I could
wgetI found this one eventually:
http://care.dlservice.microsoft.com/download/7/5/E/75EC4E54-5B02-42D6-8879-D8D3A25FBEF7/7601.17514.101119-1850_x64fre_server_eval_en-us-GRMSXEVAL_EN_DVD.iso?lcid=1033&cprod=WinSvr2I didn't see any failure notifications. However, there was also no ISO's listed in the library.
I ran
df -hto find disk usage and it didn't have enough space so I switched to my 8 TB GPT Partition.cd /var/run/sr-mount/etc etc etc code/Then I went through the process of creating another directory. I moved it to the new ISO_Lib folder and ran this:
xe sr-create name-label=ISO_Lib type=iso device-config:location=/var/run/sr-mount/etc etc etc code/ISO_Storage device-config:legacy_mode=true content-type=isoTo make it an ISO library. Nothing is listed in there. Is it me or this so much just to create local storage?
The reason being that LOCAL repo's aren't supported, is that it literally takes nothing to share out a drive from a windows desktop and connect to it via XenCenter (or XO).
It's a 5 minute process.
-
@wirestyle22 You need to rescan the SR to find freshly downloaded ISOs.
edit: local share are not officially supported by Citrix, so you can do it but if you can use a NFS/SMB share somewhere, that's even better
-
@DustinB3403 said in What You Need to Know About XenServer:
@wirestyle22 said in What You Need to Know About XenServer:
@BRRABill I did run into complications while trying to create an ISO Library. It seems pretty unintuitive to me.
mkdir -p /var/opt/xen/ISO_Libxe sr-create name-label=LocalISO type=iso device-config:location=/var/opt/xen/ISO_Store device-config:legacy_mode=true content-type=isocd /var/opt/xen/ISO_LibI then ran into issues locating the actual link so I could
wgetI found this one eventually:
http://care.dlservice.microsoft.com/download/7/5/E/75EC4E54-5B02-42D6-8879-D8D3A25FBEF7/7601.17514.101119-1850_x64fre_server_eval_en-us-GRMSXEVAL_EN_DVD.iso?lcid=1033&cprod=WinSvr2I didn't see any failure notifications. However, there was also no ISO's listed in the library.
I ran
df -hto find disk usage and it didn't have enough space so I switched to my 8 TB GPT Partition.cd /var/run/sr-mount/etc etc etc code/Then I went through the process of creating another directory. I moved it to the new ISO_Lib folder and ran this:
xe sr-create name-label=ISO_Lib type=iso device-config:location=/var/run/sr-mount/etc etc etc code/ISO_Storage device-config:legacy_mode=true content-type=isoTo make it an ISO library. Nothing is listed in there. Is it me or this so much just to create local storage?
The reason being that LOCAL repo's aren't supported, is that it literally takes nothing to share out a drive from a windows desktop and connect to it via XenCenter (or XO).
It's a 5 minute process.
Yeah but there isn't a single use case for local storage? Ever?
-
@olivier said in What You Need to Know About XenServer:
@wirestyle22 You need to rescan the SR to find freshly downloaded ISOs.
edit: local share are not officially supported by Citrix, so you can do it but if you can use a NFS/SMB share somewhere, that's even better
How do you handle permissions? This is my first time
-
@wirestyle22 If you made the wget with root, no problem, XAPI is running as root too (and default perms in here should be OK). So after you Wget is done, just
lsto be sure your ISO is here. Then, rescan the SR with the appropriate interface (Xen Orchestra or XenCenter). -
@olivier said in What You Need to Know About XenServer:
@wirestyle22 If you made the wget with root, no problem, XAPI is running as root too (and default perms in here should be OK). So after you Wget is done, just
lsto be sure your ISO is here. Then, rescan the SR with the appropriate interface (Xen Orchestra or XenCenter).I attempted a rescan with XC and nothing popped up. I'm not home right now to really go through it unfortunately. Maybe I'll configure remote access tonight so I can tinker. Everything for me currently is being run in root. Not trying to complicate my life too much yet
-
@wirestyle22 in truth, you can just create an LVM volume with a filesystem upon it, store the ISOs there and mount it as a SR. The real issue is that at the reboot XS7 will stop doing consistency check of LVM. That's totally repeatable.
-
That sound really overcomplicated to serve just some ISOs. I wonder if I won't offer a "public" NFS in read only with most popular ISO, a kind of ISO as a service
-
@olivier I think that the right way to provide a "templatized" VM is to customize a cloud OS image via libguestfs or similar tools, going through the whole installation process is just nonsense for VMs. Poor windows users…
-
@Francesco-Provino Solution is creating a template with CloudInit process, then Xen Orchestra can do the rest. See https://xen-orchestra.com/blog/full-cloudinit-power-in-xenserver/
-
My new take on XS is to not touch XS. It's like Fight Club.
The easy way for ISOs I found was...
a) set up a new Linux Mint VM
b) set up an anonymous share
c) add ISOs
d) doneWindows works, but it;s hard to do anonymous shares, I've always found. You could create a user, which I did initially, but I've since moved to a small Mint instance and haven't looked back.
