VyOS Port Address Translation for HTTPS

JaredBusch

@scottalanmiller said in VyOS Port Address Translation for HTTPS:

I am trying to get HTTPS forwarded through a VyOS router. Here is where I am...

VyOS or EdgeOS? They are not the same thing. Most likely nothing has changed here, but EdgeOS is not the same fork as VyOS.

scottalanmiller

@JaredBusch said in VyOS Port Address Translation for HTTPS:

@scottalanmiller said in VyOS Port Address Translation for HTTPS:

I am trying to get HTTPS forwarded through a VyOS router. Here is where I am...

VyOS or EdgeOS? They are not the same thing. Most likely nothing has changed here, but EdgeOS is not the same fork as VyOS.

Actual VyOS.

scottalanmiller

I had the firewall rule wrong so I cleaned that up. But still not working...

        rule 40 {
            action accept
            destination {
                address 192.168.1.31
                port 443
            }
            protocol tcp
            state {
                new enable
            }
        }

JaredBusch

Here are my EdgeOS Firewall rules for WAN_IN at one client.

 rule 1 {
     action accept
     description "Accept Established and Related"
     log disable
     state {
         established enable
         related enable
     }
 }
 rule 2 {
     action drop
     description "Drop Invalid"
     log enable
     state {
         invalid enable
     }
 }
 rule 6 {
     action accept
     description "Allow New to NginX Proxy"
     destination {
         address 10.202.1.16
         group {
             port-group HTTP_HTTPS
         }
     }
     log disable
     protocol tcp_udp
     state {
         new enable
     }
 }
 rule 8 {
     action accept
     description "Accept New for PBX"
     destination {
         group {
             port-group PBX_Ports
         }
     }
     log disable
     protocol udp
     source {
         group {
             address-group PBX_Addresses
         }
     }
     state {
         established disable
         invalid disable
         new enable
         related disable
     }
 }
 rule 9 {
     action accept
     description "Accept new for RDS"
     destination {
         address 10.202.1.13
         group {
             port-group RDS_Ports
         }
     }
     log disable
     protocol tcp
     state {
         established disable
         invalid disable
         new enable
         related disable
     }
 }
 rule 10 {
     action accept
     description "Accept New RDP"
     destination {
         address 10.202.1.13
         port 3389
     }
     log disable
     protocol tcp
     source {
         group {
             address-group RDP_Allowed_IP
         }
     }
     state {
         established disable
         invalid disable
         new enable
         related disable
     }
 }

scottalanmiller

And here is the current NAT file...

nat {
    destination {
        rule 10 {
            description "Port Forward: HTTPS to 192.168.1.31"
            destination {
                port 443
            }
            inbound-interface eth0
            protocol tcp
            translation {
                address 192.168.1.31
            }
        }
    }

JaredBusch

Here are the NAT rules.

 rule 1 {
     description "NginX Proxy"
     destination {
         address XXX.XXX.XXX.43
         group {
             port-group HTTP_HTTPS
         }
     }
     inbound-interface eth0
     inside-address {
         address 10.202.1.16
     }
     log disable
     protocol tcp_udp
     type destination
 }
 rule 3 {
     description "RDS HTTPS"
     destination {
         address XXX.XXX.XXX.44
         port 443
     }
     inbound-interface eth0
     inside-address {
         address 10.202.1.13
         port 443
     }
     log disable
     protocol tcp
     type destination
 }
 rule 4 {
     description "RDS RDP"
     destination {
         address XXX.XXX.XXX.44
         port 3389
     }
     inbound-interface eth0
     inside-address {
         address 10.202.1.13
         port 3389
     }
     log disable
     protocol tcp
     source {
         group {
             address-group RDP_Allowed_IP
         }
     }
     type destination
 }
 rule 5 {
     description "PBX Restricted Port Forward"
     destination {
         address XXX.XXX.XXX.42
         group {
             port-group PBX_Ports
         }
     }
     inbound-interface eth0
     inside-address {
         address 10.202.1.9
     }
     log disable
     protocol udp
     type destination
 }
 rule 5000 {
     description "Nginx Proxy"
     destination {
     }
     log disable
     outbound-interface eth0
     outside-address {
         address XXX.XXX.XXX.43
     }
     protocol all
     source {
         address 10.202.1.16
         group {
         }
     }
     type source
 }
 rule 5002 {
     description "RDS HTTPS"
     log disable
     outbound-interface eth0
     outside-address {
         address XXX.XXX.XXX.44
         port 443
     }
     protocol tcp
     source {
         address 10.202.1.13
         port 443
     }
     type source
 }
 rule 5003 {
     description "RDS RDP"
     destination {
         group {
             address-group RDP_Allowed_IP
         }
     }
     log disable
     outbound-interface eth0
     outside-address {
         address XXX.XXX.XXX.44
         port 3389
     }
     protocol tcp
     source {
         address 10.202.1.13
         port 3389
     }
     type source
 }
 rule 5005 {
     description "Default NAT Masquerade"
     log disable
     outbound-interface eth0
     protocol all
     type masquerade
 }

scottalanmiller

I'm working from the examples here...

http://vyos.net/wiki/User_Guide

JaredBusch

just comparing my Nginx rules to yours, it all looks laid out right.

JaredBusch

Did you apply the firewall rule to the interface?

scottalanmiller

@JaredBusch said in VyOS Port Address Translation for HTTPS:

Did you apply the firewall rule to the interface?

I've even rebooted!

JaredBusch

Do you have a source rule to match this? or does the source rule work on the default masquerade? i.e. you only have a single static IP involved here.

JaredBusch

You can see in my RDP rules that I have a source rule setup because it is a different IP than the default IP of the router.

scottalanmiller

@JaredBusch said in VyOS Port Address Translation for HTTPS:

Do you have a source rule to match this? or does the source rule work on the default masquerade? i.e. you only have a single static IP involved here.

I just removed the source rule to test. There is only one static IP at the moment.

scottalanmiller

Got it working. The firewall rule was in the wrong section of the firewall.

JaredBusch

@scottalanmiller said in VyOS Port Address Translation for HTTPS:

Got it working. The firewall rule was in the wrong section of the firewall.

You had it on eth0 local instead of eth0 in?

scottalanmiller

@JaredBusch said in VyOS Port Address Translation for HTTPS:

@scottalanmiller said in VyOS Port Address Translation for HTTPS:

Got it working. The firewall rule was in the wrong section of the firewall.

You had it on eth0 local instead of eth0 in?

Yuppers.