Favorite Linux Commands
-
-
-
ok so looking through the list of new posts.... this caught my eye fast

-
@johnhooks said:
@MattSpeller said:
@johnhooks said:
@MattSpeller said:
I use dd a lot
boobs
80085?
8008135
what was the one you had to hold the thing upside down for... oh geez lol
-
@MattSpeller said:
@johnhooks said:
@MattSpeller said:
@johnhooks said:
@MattSpeller said:
I use dd a lot
boobs
80085?
8008135
what was the one you had to hold the thing upside down for... oh geez lol
ha 7734
-
-
List disk info (Lowercase L)
fdisk -lList hard drive model, serial and capabilities:
hdparm -I /dev/sdaHard drive speed:
hdparm -t /dev/sddHard drive temperature:
hddtemp -u C -n /dev/sdaWhat software a web server is running:
curl -I http://www.newegg.comKernel buffer messages:
dmesgFile transfer with active speed:
rsync --progress --recursive source/* destincationPing sweep a network with NMAP and just show up IP's:
sudo nmap -PO -sP -PE -n --open -v 10.1.1.1-10 | grep "scan report" | grep -v "host down" | sed 's/Nmap scan report for //g'Only show down/available IP's:
sudo nmap -PO -sP -PE -n --open -v 10.1.1.1-10 | grep "host down" | sed 's/Nmap scan report for //g' | sed 's/ \[host down\]//g'Ping a TCP port:
nping --tcp -p 80,443 www.newegg.comStress test packets per second with ICMP (5,000 pings sent at rate of 100k per second):
nping --icmp 10.1.1.1 --rate 100000 -c 5000QoS EF ping:
ping -Q 0xB8 10.1.1.1Packet capture (CTRL + C when done):
sudo tcpdump -i eth0 -w testing.pcapView a packet capture for ICMP:
tcpdump -r testing.pcap -nnvvvSe | grep ICMPThat's about all I got right now.
-
Some "not so standard" useful IP address stuff:
ip addr show eth0 ip -s link show eth0 -
@quicky2g said:
Some "not so standard" useful IP address stuff:
ip addr show eth0 ip -s link show eth0Supposedly, those are the new standards, ha ha ha.
-
-
@quicky2g You and me both, lol.
-
Same here.
-
@quicky2g said:
@dafyre said:
@quicky2g said:
Some "not so standard" useful IP address stuff:
ip addr show eth0 ip -s link show eth0Supposedly, those are the new standards, ha ha ha.
Muscle memory has me stuck on
ifconfigOnly the people here will understand how many times I've typed ifconfig instead of ipconfig, or ipconfig instead of ifconfig. So annoying (yes, I annoy myself.)
-
@travisdh1 said:
@quicky2g said:
@dafyre said:
@quicky2g said:
Some "not so standard" useful IP address stuff:
ip addr show eth0 ip -s link show eth0Supposedly, those are the new standards, ha ha ha.
Muscle memory has me stuck on
ifconfigOnly the people here will understand how many times I've typed ifconfig instead of ipconfig, or ipconfig instead of ifconfig. So annoying (yes, I annoy myself.)
Annoying yourself is fine. Arguing with yourself is fine... But if you start to hear voices arguing back... Then you should worry.
However, I do feel your pain.
-
@dafyre said:
@travisdh1 said:
@quicky2g said:
@dafyre said:
@quicky2g said:
Some "not so standard" useful IP address stuff:
ip addr show eth0 ip -s link show eth0Supposedly, those are the new standards, ha ha ha.
Muscle memory has me stuck on
ifconfigOnly the people here will understand how many times I've typed ifconfig instead of ipconfig, or ipconfig instead of ifconfig. So annoying (yes, I annoy myself.)
Annoying yourself is fine. Arguing with yourself is fine... But if you start to hear voices arguing back... Then you should worry.
However, I do feel your pain.
Only voices I hear arguing back are telling me to do dishes, take out the trash, etc....
Those definitely aren't in my head

-
@scottalanmiller Have you tried glances yet? Just curious.
-
No, I have not.
-
Running it now...
-
Really liking glances.
My Ubuntu install:
sudo apt-get install python-pip build-essential python-dev sudo pip install --upgrade glances sudo pip install bottleOptional for hardware sensors:
sudo apt-get install lm-sensors sudo pip install PySensorsJust running "glances" at cli got me the interface. Web server worked like this:
sudo glances -w -B 10.1.1.1Worked at http://10.1.1.1:61208
Ran a few simultaneous web server instances in the background for local network and Hamachi:
sudo glances -w -B 10.1.1.1 & sudo glances -w -B 25.25.25.25 &Definitely going into rc.local now.
Anyone get https working?
-
@quicky2g said:
Really liking glances.
My Ubuntu install:
sudo apt-get install python-pip build-essential python-dev sudo pip install --upgrade glances sudo pip install bottleOptional for hardware sensors:
sudo apt-get install lm-sensors sudo pip install PySensorsJust running "glances" at cli got me the interface. Web server worked like this:
sudo glances -w -B 10.1.1.1Worked at http://10.1.1.1:61208
Ran a few simultaneous web server instances in the background for local network and Hamachi:
sudo glances -w -B 10.1.1.1 & sudo glances -w -B 25.25.25.25 &Definitely going into rc.local now.
Anyone get https working?
That's really nice. I've never used the web version before, just the cli.
