Yeah the gateway is correct it's frontier. I am on the phone now to ask them to assign the proper gateway..

They have the lan and wan on the same gateway

I am trying to configure my static ip with one Nic card. I am running hipchat server.

The gateway address is on a different subnet the the public ip. I can't seem to get the Nic card to get on the net.

So public addr is 104.x.x.x. 255.255.255.224. GW 107.x.x.x.x

Doesn't seem to route not matter what I do.

when I do router -n. GW shows 0.0.0.0

@JaredBusch public ip on vlan 50 are randomly dropping internet connection? Any thoughts.

Equipment
Er3- lite
Hp-2920
Ubiquity 24 switch lite
Ubiquity wifi router

It’s a small network I have EDI fiber 29 static IP’s
scale cluster, five servers

@hobbit666 pmed you

I am looking for someone to configure my network on the ground up this will be a one off job and if you give me done remotely I am open to it

I’m having a problem with my router my switch my Wi-Fi. Maybe I don’t have this configured correctly but I have my router which is the ER3 I signed an IP address that is DHCP and anything connected to it will get a 10.0.0 IP address my switch has the same IP address Ameri Wi-Fi keeps losing Internet I don’t understand it it’s hooked up to“It’s hooked up to the switch hardwired with a 192 address and DHCP and I work for a little while and stop working and has me very puzzled

I have a customer that needs to keep track of laptops and other devices. They want to have a running log what was done to each item and also EOL too. What is a good solutions that I can implement for them

it's not going threw nat at all? Wondering why eth2 is show ip 242 when i have the nic set to 66 .. Frustrating wish i new more time to learn! Thank you guys for all your help.

I see masquerade eth0..

nothing with eth2

One last question... I put a static ip ...in my nic card... then I go on web ask what my ip address is and it's pinging the 242.network as my ip.. not the nic card i configured.

Gentalman.. I thank you so much you guys rock!!! .... It is configured. and working!!!

Ok so i should remove the 10.254.254.1 off of eth2

and config the ip to 64/27

what would be my gateway then for the /27..

so .. on eth2. would i add my first public facing ip address.?

OK with the configre of Jared i got it working.where do i put the dmz..?

Both....

yes

I have 29 static ip address. that i have public facing servers.

so if i configure any ethernet port on a computer connected to the network i will be about to use the public ip ?