ZFS Based Storage for Medium VMWare Workload
-
By dropping VMware vSphere Essentials you are looking at a roughly $1200 savings right away. Both HyperV and XenServer will do what you need absolutely free.
-
That $1200 number was based off of Essentials. Just saw that you have Essentials Plus. What is that for? Eliminating that will save you many thousands of dollars! This just went from a "little win" to a major one!
-
@donaldlandru said:
I do rely on vmotion and drs in the ops cluster for better utilizing resources and doing maintenance.
Better to be fast and cheap than to be slow, expensive and have to balance. Easier to throw "speed" at the problem than to do live balancing if that is all that you are getting out of it.
Maintenance should be trivial, what planned outages are you avoiding that warrant the heavier risk of unplanned ones?
-
@donaldlandru said:
Requirements for development storage
- 9+ Tib of usable storage
- Support a minimum of 1100 random iops (what our current system is peaking at)
If split between five nodes, that's a minimal number. My eight year old desktop has 100,000 IOPS! This is less than 250 IOPS per machine, you can often hit that with a small RAID 1 pair in each box! And 10TB is just 2TB per box. This isn't a big problem to tackle when you break it down. Actually pretty moderate needs.
-
@scottalanmiller said:
That $1200 number was based off of Essentials. Just saw that you have Essentials Plus. What is that for? Eliminating that will save you many thousands of dollars! This just went from a "little win" to a major one!
Essentials plus is to allow us to use VMotion on operations cluster, where is would likely be cheaper in the long-run to acquire MS Server datacenter licensing and building redundant services, this was the approved solution to move VM's back and forth for node maintenance / upgrades.
The ops layout is
2x AD DC (one hosts DHCP server)
1x SQL server for SharePoint
1x SharePoint foundation
1x Exchange server
1x File Server (hosts a bunch of other services because of no additional server licenses)
handful of other CentOS servers for monitoring, help desk, internal web serverThe ops cluster could likely be decommissioned and what little remaining services could be collocated on the dev environments if I could only convince the owners to go with Office 365
-
@donaldlandru said:
#1 a.k.a the safe option
HP StoreVirtual 4530 with 12 TB (7.2k) spindles in RAID6 -- this is our vendor recommendation. This is an HP renew quote with 3 years 5x9 support next-day on-site for ~$15,000http://www8.hp.com/us/en/products/disk-storage/product-detail.html?oid=6255484
Other than being able to blame a vendor for losing data or uptime rather than being on the hook yourself, what makes this safe? Looking at it architecturally, I would call it reckless to the business as it is an inverted pyramid of doom. The unit is nothing but a normal server on which everything rests. How do you handle it failing? How do you do maintenance if you can't do bring it down? And it is just RAID 6, which is fine, but no aspect of this makes it very safe.
Having a vendor to blame is nice, but the vendor is only responsible for the product, not the system architectural design. Outages caused by this would still be your throat, not HP's. It's not that it is a bad unit, I just don't see how it could be used appropriately in this kind of a setup.
-
@donaldlandru said:
The biggest concerns I have exist in both platforms (drives fail, controllers fail, data goes bad, etc) and have to be mitigated either way. That is what we have backups for -- in my opinion the HP gets me the following things:
This is where you really have to look carefully. You have this big risk (and cost) that you know this does not mitigate. But having local drives with stand alone servers would partially mitigate this and local drives with replication would mitigate this better than nearly any possible approach. So you appear to have options that are faster, cheaper and potentially easier that also solve the biggest problem.
-
@donaldlandru said:
24 spindle 900Gb (7.2k SAS) in 12 mirrored vdevs
That's RAID 01, you never want that. You want 12 mirrors in a stripe for RAID 10.
-
Ok.. your feedback is actually showing something I have been afraid of, I have severe tunnel vision is servicing the current solution.
Doing a quick inventory as to why I am trying to do that:- We have the investment into this. Like another recent thread here discussed once an SMB gets heavily invested one way it is hard to switch. To be honest, I am not sure how I could convince them too at this point. This actually seems like an opportunity for a great learning experience
- Training of supporting resources -- I have a counterpart in our off-shore office that is just getting up to speed on how VMware works -- to be this will be even harder to change
- I have been using Vmware for 4 years at the office and at home, so I am comfortable with it. This reason should also make the list as to why I should change it.
One limiting factor I see right now is our current chassis are 1U with 2-4 drive bays which would hamper a local storage deployment.
Edit -- Stepping back and thinking, the lack of drive bays are not a valid limiting factor as I could easily add SAS and do DAS storage on these nodes.
-
@scottalanmiller said:
@donaldlandru said:
24 spindle 900Gb (7.2k SAS) in 12 mirrored vdevs
That's RAID 01, you never want that. You want 12 mirrors in a stripe for RAID 10.
This was modeled after the way TrueNAS (commercial version of FreeNAS) quoted us.
-
@donaldlandru said:
@scottalanmiller said:
@donaldlandru said:
24 spindle 900Gb (7.2k SAS) in 12 mirrored vdevs
That's RAID 01, you never want that. You want 12 mirrors in a stripe for RAID 10.
This was modeled after the way TrueNAS (commercial version of FreeNAS) quoted us.
The exact people I warn people against.
http://www.smbitjournal.com/2015/07/the-jurassic-park-effect/
The FreeNAS community should be avoided completely. The worst storage advice and misunderstandings of storage basics I've ever seen. FreeNAS, by its nature, collects storage misunderstandings and creates a community of the worst storage advice possible.
-
The FreeNAS community tends to do things like promote software RAID when it doesn't make sense and attempts to dupe people by using carefully crafted marketing phrases like "in order for FreeNAS to monitor the disks", leaving out critical advice like "that isn't something you want FreeNAS to be doing."
-
@donaldlandru said:
- We have the investment into this. Like another recent thread here discussed once an SMB gets heavily invested one way it is hard to switch. To be honest, I am not sure how I could convince them too at this point. This actually seems like an opportunity for a great learning experience
You have what investment into it now? Once you replace the storage that you have today, aren't you effectively starting over and really this is about stopping you from wasting a new investment rather than protecting a current one. Everything that you proposed is, I believe, a greater "reinvestment" than what I am proposing. So, if I'm understanding the concern here correctly, your HP and/or ZFS approach is actually the one that this concern would rule out, correct? Since it requires a much larger new investment.
-
Also in referencing point one.... what you are sensing is the fear of people giving in to the sunk cost fallacy. Even if they don't end up doing this, take a moment to sit back and understand how the sunk cost fallacy can be destructive and maybe even have a talk with the decision makers before looking at options about this fiscal mistake to make sure that people are thinking about it logically before they get the amygdala (fight or flight) emotional reaction from the idea of changing direction.
-
@donaldlandru said:
- Training of supporting resources -- I have a counterpart in our off-shore office that is just getting up to speed on how VMware works -- to be this will be even harder to change
All the more reason to go to an easier architecture with fewer moving parts and fewer things to support. Moving from VMware to XenServer or HyperV should take maybe an hour, tops. These are all very similar products that all do very little. Hypervisors should not require any real training. Most people can move from VMware vSphere to XenServer in literally a few minutes. It's all super simple GUI management, they should be able to just look at the interface and know what to do.
-
@donaldlandru said:
Edit -- Stepping back and thinking, the lack of drive bays are not a valid limiting factor as I could easily add SAS and do DAS storage on these nodes.
You can do a hybrid too. Local for some workloads and DAS or shared for others.
Figuring out if you need to just do local storage, which is super simple, or if you need to have replicated local storage, which is more complex, is the place to start. From the description, it sounds like straight local storage might be the way to go. Very cheap, very easy to tune for big time performance. XenCenter will happily put many independent (non-clustered) nodes into a single interface to make it super simple for the support staff wherever they are.
-
It seems I remember @donaldlandru mentioning making one big 5 host cluster. If he were to use something such as XenServer he would get the big cluster and still be able to separate the workloads out between the dev servers and the ops servers and still have "Local" storage right?
Even if the answer to the "Local" storage (I say that because XenServer can do its own shared storage now, right?) is a resounding "No", he can still leverage replicatoin to replicate the Dev hosts into the Ops environment and vice versa for maintenance and emergencies, right?
-
@dafyre said:
It seems I remember @donaldlandru mentioning making one big 5 host cluster. If he were to use something such as XenServer he would get the big cluster and still be able to separate the workloads out between the dev servers and the ops servers and still have "Local" storage right?
Even if the answer to the "Local" storage (I say that because XenServer can do its own shared storage now, right?) is a resounding "No", he can still leverage replicatoin to replicate the Dev hosts into the Ops environment and vice versa for maintenance and emergencies, right?
The answer to all your questions is yes. XenServer can deploy VMs on the same "cluster" to different storage devices. It will also do live migrations between various storage devices.
-
If that's the case, then @donaldlandru could just build one big 5-host cluster (assuming he can get the Politics taken care of and the CPUs are compatible -- if that is even an issue) on XenServer and be happy... Upgrade to 4 or 6TB drives per host (RAID 10) and also be happy.
-
@dafyre said:
It seems I remember @donaldlandru mentioning making one big 5 host cluster. If he were to use something such as XenServer he would get the big cluster and still be able to separate the workloads out between the dev servers and the ops servers and still have "Local" storage right?
Even if the answer to the "Local" storage (I say that because XenServer can do its own shared storage now, right?) is a resounding "No", he can still leverage replicatoin to replicate the Dev hosts into the Ops environment and vice versa for maintenance and emergencies, right?
Correct. This would actually make you question the term cluster as the boxes would actually not be associated with each other except that they are all managed from the same interface. Is that a cluster? Not to most people. Does it look like a single entity to someone managing it? Yes.
He could replicate things into other environments, yes.
