Hyper V Tape passthrough possible?
-
@wrx7m said in Hyper V Tape passthrough possible?:
@Pete-S said in Hyper V Tape passthrough possible?:
LTO-7 is 6TB native / 15TB compressed so still a lot.
Right, but he still hasn't said how much data he actually has. What is a standard full backup and what is his change rate. How often will full backups be run, etc.
Yes, but what he does today would probably change if he the tape up and running. Otherwise why invest in tape? A single tape drive is something like $3K-$4K and simple 1U/2U tape library in the $7K-$8K range.
-
@Pete-S said in Hyper V Tape passthrough possible?:
@wrx7m said in Hyper V Tape passthrough possible?:
@Pete-S said in Hyper V Tape passthrough possible?:
LTO-7 is 6TB native / 15TB compressed so still a lot.
Right, but he still hasn't said how much data he actually has. What is a standard full backup and what is his change rate. How often will full backups be run, etc.
Yes, but what he does today would probably change if he the tape up and running. Otherwise why invest in tape? A single tape drive is something like $3K-$4K and simple 2U tape library in the $7K-$8K range.
Definitely a considerable expense. However, if he is only filling up 5% of the tapes every week, what's the point in using tape?
-
What is the plan for off-site storage with tapes? A service like Iron Mountain or someone takes them home and puts them in a closet?
-
@wrx7m said in Hyper V Tape passthrough possible?:
@Pete-S said in Hyper V Tape passthrough possible?:
@wrx7m said in Hyper V Tape passthrough possible?:
@Pete-S said in Hyper V Tape passthrough possible?:
LTO-7 is 6TB native / 15TB compressed so still a lot.
Right, but he still hasn't said how much data he actually has. What is a standard full backup and what is his change rate. How often will full backups be run, etc.
Yes, but what he does today would probably change if he the tape up and running. Otherwise why invest in tape? A single tape drive is something like $3K-$4K and simple 2U tape library in the $7K-$8K range.
Definitely a considerable expense. However, if he is only filling up 5% of the tapes every week, what's the point in using tape?
Could be to take it off site and store it. Tape has many times fewer bit errors than hard drives and 30 year archival properties. So they are excellent for that.
-
@Pete-S said in Hyper V Tape passthrough possible?:
@wrx7m said in Hyper V Tape passthrough possible?:
@Pete-S said in Hyper V Tape passthrough possible?:
@wrx7m said in Hyper V Tape passthrough possible?:
@Pete-S said in Hyper V Tape passthrough possible?:
LTO-7 is 6TB native / 15TB compressed so still a lot.
Right, but he still hasn't said how much data he actually has. What is a standard full backup and what is his change rate. How often will full backups be run, etc.
Yes, but what he does today would probably change if he the tape up and running. Otherwise why invest in tape? A single tape drive is something like $3K-$4K and simple 2U tape library in the $7K-$8K range.
Definitely a considerable expense. However, if he is only filling up 5% of the tapes every week, what's the point in using tape?
Could be to take it off site and store it. Tape has many times fewer bit errors than hard drives and 30 year archival properties. So they are excellent for that.
I haven't used tapes in years. How does that change when they are used over and over or stored in less than ideal conditions?
-
@wrx7m said in Hyper V Tape passthrough possible?:
someone takes them home and puts them in a closet?
Well, you can't beat the RTO of that solution with anything cloud related.
-
@Pete-S said in Hyper V Tape passthrough possible?:
Could be to take it off site and store it.
Yeah, the portability for off site transfer is one of the biggest benefits to tape. But, if you don't have that much data, you can still get it offsite via a VTL and your WAN link.
-
@Pete-S said in Hyper V Tape passthrough possible?:
@wrx7m said in Hyper V Tape passthrough possible?:
someone takes them home and puts them in a closet?
Well, you can't beat the RTO of that solution with anything cloud related.
lol - maybe, maybe not.
-
@wrx7m said in Hyper V Tape passthrough possible?:
@Pete-S said in Hyper V Tape passthrough possible?:
@wrx7m said in Hyper V Tape passthrough possible?:
@Pete-S said in Hyper V Tape passthrough possible?:
@wrx7m said in Hyper V Tape passthrough possible?:
@Pete-S said in Hyper V Tape passthrough possible?:
LTO-7 is 6TB native / 15TB compressed so still a lot.
Right, but he still hasn't said how much data he actually has. What is a standard full backup and what is his change rate. How often will full backups be run, etc.
Yes, but what he does today would probably change if he the tape up and running. Otherwise why invest in tape? A single tape drive is something like $3K-$4K and simple 2U tape library in the $7K-$8K range.
Definitely a considerable expense. However, if he is only filling up 5% of the tapes every week, what's the point in using tape?
Could be to take it off site and store it. Tape has many times fewer bit errors than hard drives and 30 year archival properties. So they are excellent for that.
I haven't used tapes in years. How does that change when they are used over and over or stored in less than ideal conditions?
They are rated for 260 full backups per tape so eventually they will have to be replaced. If you only use two tapes that you swap out every week, it will take ten years before you have to replace them.
-
@wrx7m said in Hyper V Tape passthrough possible?:
@Pete-S said in Hyper V Tape passthrough possible?:
@wrx7m said in Hyper V Tape passthrough possible?:
someone takes them home and puts them in a closet?
Well, you can't beat the RTO of that solution with anything cloud related.
lol - maybe, maybe not.
I guess it depends on if the guy who has them in his closet is on vacation or not.
-
@Pete-S said in Hyper V Tape passthrough possible?:
@wrx7m said in Hyper V Tape passthrough possible?:
@Pete-S said in Hyper V Tape passthrough possible?:
@wrx7m said in Hyper V Tape passthrough possible?:
someone takes them home and puts them in a closet?
Well, you can't beat the RTO of that solution with anything cloud related.
lol - maybe, maybe not.
I guess it depends on if the guy who has them in his closet is on vacation or not.
Or goes rogue lol
-
Hey @Donahue. Have you looked at free Starwind Tape Redirector by any chance? It basically allows you to present a tape drive attached to the host as an ISCSI LUN to your Veeam B&R's Windows Server VM so the backup software would see it directly installed. Wouldn't this solve your problem?
-
@Pete-S said in Hyper V Tape passthrough possible?:
@Donahue said in Hyper V Tape passthrough possible?:
I'm not currently using tapes yet. I bought some LTO-7 tapes, but they've been on my shelf for like a year because other projects came up. I had been planning like 1 a week or some similar interval.
LTO-7 is 6TB native / 15TB compressed so still a lot.
Do you have a lot of VMs running on it? You might want to consider going bare metal. Solves your problem without any hassle.
Or as mentioned, just get a second controller for the tape and pass that through the hypervisor. You only need a simple HBA SAS-2 (6Gbps) for a tape drive.
Keep in mind the data going to the tape is likely already compressed, so expect to the native amount of "backup data".
-
@taurex said in Hyper V Tape passthrough possible?:
Hey @Donahue. Have you looked at free Starwind Tape Redirector by any chance? It basically allows you to present a tape drive attached to the host as an ISCSI LUN to your Veeam B&R's Windows Server VM so the backup software would see it directly installed. Wouldn't this solve your problem?
I used this also, but in the end it was slower and unreliable.
So I installed Veeam on hardware and all was well. You don't need veem server installed on the device you have tape drive connected to, so keep that in mind too.
-
@Obsolesce said in Hyper V Tape passthrough possible?:
@Pete-S said in Hyper V Tape passthrough possible?:
@Donahue said in Hyper V Tape passthrough possible?:
I'm not currently using tapes yet. I bought some LTO-7 tapes, but they've been on my shelf for like a year because other projects came up. I had been planning like 1 a week or some similar interval.
LTO-7 is 6TB native / 15TB compressed so still a lot.
Do you have a lot of VMs running on it? You might want to consider going bare metal. Solves your problem without any hassle.
Or as mentioned, just get a second controller for the tape and pass that through the hypervisor. You only need a simple HBA SAS-2 (6Gbps) for a tape drive.
Keep in mind the data going to the tape is likely already compressed, so expect to the native amount of "backup data".
No, tape compression is way better.
-
@Obsolesce said in Hyper V Tape passthrough possible?:
@Pete-S said in Hyper V Tape passthrough possible?:
@Donahue said in Hyper V Tape passthrough possible?:
I'm not currently using tapes yet. I bought some LTO-7 tapes, but they've been on my shelf for like a year because other projects came up. I had been planning like 1 a week or some similar interval.
LTO-7 is 6TB native / 15TB compressed so still a lot.
Do you have a lot of VMs running on it? You might want to consider going bare metal. Solves your problem without any hassle.
Or as mentioned, just get a second controller for the tape and pass that through the hypervisor. You only need a simple HBA SAS-2 (6Gbps) for a tape drive.
Keep in mind the data going to the tape is likely already compressed, so expect to the native amount of "backup data".
The compression averages on tapes already account for that.
-
@JaredBusch said in Hyper V Tape passthrough possible?:
@Obsolesce said in Hyper V Tape passthrough possible?:
@Pete-S said in Hyper V Tape passthrough possible?:
@Donahue said in Hyper V Tape passthrough possible?:
I'm not currently using tapes yet. I bought some LTO-7 tapes, but they've been on my shelf for like a year because other projects came up. I had been planning like 1 a week or some similar interval.
LTO-7 is 6TB native / 15TB compressed so still a lot.
Do you have a lot of VMs running on it? You might want to consider going bare metal. Solves your problem without any hassle.
Or as mentioned, just get a second controller for the tape and pass that through the hypervisor. You only need a simple HBA SAS-2 (6Gbps) for a tape drive.
Keep in mind the data going to the tape is likely already compressed, so expect to the native amount of "backup data".
No, tape compression is way better.
Wasn't the case for me when I was using Veeam, with tape compression after Veeam's compression. I got like no tape compression at all.
-
@Obsolesce said in Hyper V Tape passthrough possible?:
@JaredBusch said in Hyper V Tape passthrough possible?:
@Obsolesce said in Hyper V Tape passthrough possible?:
@Pete-S said in Hyper V Tape passthrough possible?:
@Donahue said in Hyper V Tape passthrough possible?:
I'm not currently using tapes yet. I bought some LTO-7 tapes, but they've been on my shelf for like a year because other projects came up. I had been planning like 1 a week or some similar interval.
LTO-7 is 6TB native / 15TB compressed so still a lot.
Do you have a lot of VMs running on it? You might want to consider going bare metal. Solves your problem without any hassle.
Or as mentioned, just get a second controller for the tape and pass that through the hypervisor. You only need a simple HBA SAS-2 (6Gbps) for a tape drive.
Keep in mind the data going to the tape is likely already compressed, so expect to the native amount of "backup data".
No, tape compression is way better.
Wasn't the case for me when I was using Veeam, with tape compression after Veeam's compression. I got like no tape compression at all.
The tape drive is designed to not compress already compressed data. It makes this determination in real-time as the data comes in.
Thing is that the tape drive compresses the data on the fly. So there is no point wasting CPU resources trying to compress files before sending it to tape. The tape drive will take the 900 MByte/sec of data that you send to it and compress it down to 360 MByte/sec that gets written to tape. The 360 MByte/sec is the real limit, while the 900 MByte/sec is actually variable and depending on the compression ratio.
And then when you want to read from the tape it will do the opposite, read 360 MByte/sec and decompress it for you on the fly and deliver 900 MByte/sec back to you (if the data is compressed by the drive).
If you send data that can't be compressed it will only take 360MByte/sec and read 360 MByte/sec. So you gain nothing by using compression in the backup software. Unless there is some other reason to do it of course. Like sending the backup over the WAN before it goes to tape.
-
@Pete-S said in Hyper V Tape passthrough possible?:
@Obsolesce said in Hyper V Tape passthrough possible?:
@JaredBusch said in Hyper V Tape passthrough possible?:
@Obsolesce said in Hyper V Tape passthrough possible?:
@Pete-S said in Hyper V Tape passthrough possible?:
@Donahue said in Hyper V Tape passthrough possible?:
I'm not currently using tapes yet. I bought some LTO-7 tapes, but they've been on my shelf for like a year because other projects came up. I had been planning like 1 a week or some similar interval.
LTO-7 is 6TB native / 15TB compressed so still a lot.
Do you have a lot of VMs running on it? You might want to consider going bare metal. Solves your problem without any hassle.
Or as mentioned, just get a second controller for the tape and pass that through the hypervisor. You only need a simple HBA SAS-2 (6Gbps) for a tape drive.
Keep in mind the data going to the tape is likely already compressed, so expect to the native amount of "backup data".
No, tape compression is way better.
Wasn't the case for me when I was using Veeam, with tape compression after Veeam's compression. I got like no tape compression at all.
The tape drive is designed to not compress already compressed data. It makes this determination in real-time as the data comes in.
Thing is that the tape drive compresses the data on the fly. So there is no point wasting CPU resources trying to compress files before sending it to tape. The tape drive will take the 900 MByte/sec of data that you send to it and compress it down to 360 MByte/sec that gets written to tape. The 360 MByte/sec is the real limit, while the 900 MByte/sec is actually variable and depending on the compression ratio.
And then when you want to read from the tape it will do the opposite, read 360 MByte/sec and decompress it for you on the fly and deliver 900 MByte/sec back to you (if the data is compressed by the drive).
If you send data that can't be compressed it will only take 360MByte/sec and read 360 MByte/sec. So you gain nothing by using compression in the backup software. Unless there is some other reason to do it of course. Like sending the backup over the WAN before it goes to tape.
The thing is, the production data wasn't going directly to tape. Otherwise, yes, it'd make sense to not have the backup software do the compression and let the tape drive do it.
Production data was going to a backup repository first (on-prem backup storage). That was super fast DAS, Veeam could back it up quick and compress it very well so there was more room for backups. We needed on-prem backups so we could restore data much faster than had it been off-site on a tape, plus it would costs to get the tape back.
THen, what went to tape and was rotated off-site was the backup repo to tape. So that's why it was compressed first.
It was an actual backup plan, not the typical ad-hoc style backup.
X amount of daily or weekly backups were held on-prem depending on the data. Then that was thrown on to tape once a month and rotated back eventually. I think there were 3 sets, so restores could go back about 4 months depending on when something were to go sour.
Restores were great coming from on-prem. Everything tested well.
-
@wrx7m said in Hyper V Tape passthrough possible?:
What is the plan for off-site storage with tapes? A service like Iron Mountain or someone takes them home and puts them in a closet?
safe deposit box at the bank
