Correct Settings For Hosted FreePBX 13
-
@bigbear said in Correct Settings For Hosted FreePBX 13:
@scottalanmiller without turning off anything what's he lowest vultr you'd use?
Not sure, we always tune our systems
-
@scottalanmiller said in Correct Settings For Hosted FreePBX 13:
@bigbear said in Correct Settings For Hosted FreePBX 13:
@scottalanmiller without turning off anything what's he lowest vultr you'd use?
Not sure, we always tune our systems
By tuning you mean? Removing unwanted modules? Changing pagefile and CPU mgmt in Linux?
-
@bigbear said in Correct Settings For Hosted FreePBX 13:
@scottalanmiller said in Correct Settings For Hosted FreePBX 13:
@bigbear said in Correct Settings For Hosted FreePBX 13:
@scottalanmiller without turning off anything what's he lowest vultr you'd use?
Not sure, we always tune our systems
By tuning you mean? Removing unwanted modules? Changing pagefile and CPU mgmt in Linux?
Not CPU, but we remove unused services, reduce the responsiveness of Apache, etc.
-
@scottalanmiller said in Correct Settings For Hosted FreePBX 13:
@bigbear said in Correct Settings For Hosted FreePBX 13:
@scottalanmiller said in Correct Settings For Hosted FreePBX 13:
@bigbear said in Correct Settings For Hosted FreePBX 13:
@scottalanmiller without turning off anything what's he lowest vultr you'd use?
Not sure, we always tune our systems
By tuning you mean? Removing unwanted modules? Changing pagefile and CPU mgmt in Linux?
Not CPU, but we remove unused services, reduce the responsiveness of Apache, etc.
Stuff not easily scripted/automated?
-
@bigbear said in Correct Settings For Hosted FreePBX 13:
@scottalanmiller said in Correct Settings For Hosted FreePBX 13:
@bigbear said in Correct Settings For Hosted FreePBX 13:
@scottalanmiller said in Correct Settings For Hosted FreePBX 13:
@bigbear said in Correct Settings For Hosted FreePBX 13:
@scottalanmiller without turning off anything what's he lowest vultr you'd use?
Not sure, we always tune our systems
By tuning you mean? Removing unwanted modules? Changing pagefile and CPU mgmt in Linux?
Not CPU, but we remove unused services, reduce the responsiveness of Apache, etc.
Stuff not easily scripted/automated?
We are starting to do that stuff to standardize it. Pretty much everything is automatable on Linux
-
@scottalanmiller said in Correct Settings For Hosted FreePBX 13:
@bigbear said in Correct Settings For Hosted FreePBX 13:
@scottalanmiller said in Correct Settings For Hosted FreePBX 13:
@bigbear said in Correct Settings For Hosted FreePBX 13:
@scottalanmiller said in Correct Settings For Hosted FreePBX 13:
@bigbear said in Correct Settings For Hosted FreePBX 13:
@scottalanmiller without turning off anything what's he lowest vultr you'd use?
Not sure, we always tune our systems
By tuning you mean? Removing unwanted modules? Changing pagefile and CPU mgmt in Linux?
Not CPU, but we remove unused services, reduce the responsiveness of Apache, etc.
Stuff not easily scripted/automated?
We are starting to do that stuff to standardize it. Pretty much everything is automatable on Linux
Where I'm heading with this is to write a php interface for provisioning using the acme packet and vultr api's, not sure yet about freepbx api's maybe salt my way to ops automation. Totally replace our in house system.
It's not my primary job around here, I'm a radiohead...
-
@bigbear said in Correct Settings For Hosted FreePBX 13:
Is it expected that you convert a chan_sip extension in the GUI by clicking to change to pjsip driver? Or would I have to re-provision the phones?
You can easily switch this without reprovisioning the phones. I have done it more than once.
What would be really helpful in the guide is to see how you manually place the config files to provisions phones and if there are any relative firewall changes that need to be made...
You mean my guide? That is coming, but basically you put them in
/tftpbootlike any other default tftp setup.Assuming you have not messed up the firewall more, they work once you enable the right network settings.I use the 'Internal' or 'Other' setting for that.
-
@JaredBusch I'm gonna retry all this from scratch tonight. Maybe use a $10 vm. Not doing any "tuning" though.
I was thinking with pjsip on 5060 should in be trunking down to 5160 and chan_sip from my soft switch?
-
I use HTTPS provisioning in the Yealink phones, but you could use TFTP also.
HTTPS provisioning is on port 1443 by default.
So in your phone you would setup https://pbx.domain.com:1433 as the config URL.
auto_provision.server.url = https://pbx.domain.com:1443 firmware.url = https://pbx.domain.com:1443/T42-29.81.0.20.rom
-
@bigbear said in Correct Settings For Hosted FreePBX 13:
@JaredBusch I'm gonna retry all this from scratch tonight. Maybe use a $10 vm. Not doing any "tuning" though.
I was thinking with pjsip on 5060 should in be trunking down to 5160 and chan_sip from my soft switch?
outbound trunks still use chan_sip out to the other end's port 5060 like you are familiar.
I feel you are overcomplicating this entire thing.
-
@JaredBusch said in Correct Settings For Hosted FreePBX 13:
@bigbear said in Correct Settings For Hosted FreePBX 13:
@JaredBusch I'm gonna retry all this from scratch tonight. Maybe use a $10 vm. Not doing any "tuning" though.
I was thinking with pjsip on 5060 should in be trunking down to 5160 and chan_sip from my soft switch?
outbound trunks still use chan_sip out to the other end's port 5060 like you are familiar.
I feel you are overcomplicating this entire thing.
I mean, if your tftp is "internal" how do the remote phones access it? Lol. Just doesn't follow any firewall lingo I've ever used...
-
@bigbear said in Correct Settings For Hosted FreePBX 13:
@JaredBusch said in Correct Settings For Hosted FreePBX 13:
@bigbear said in Correct Settings For Hosted FreePBX 13:
@JaredBusch I'm gonna retry all this from scratch tonight. Maybe use a $10 vm. Not doing any "tuning" though.
I was thinking with pjsip on 5060 should in be trunking down to 5160 and chan_sip from my soft switch?
outbound trunks still use chan_sip out to the other end's port 5060 like you are familiar.
I feel you are overcomplicating this entire thing.
I mean, if your tftp is "internal" how do the remote phones access it? Lol. Just doesn't follow any firewall lingo I've ever used...
You really have no idea what you are doing here. Maybe you should leave this to your PBX team, have you thought about that?
If you are going to continue, read the definitions, but realize, they are simply labels to be friendly.
So if you make a network or IP internal like I did above, then that network can access anything marked internal on the service map pages.
By default, many things are set to internal already on those pages.
By default, almost nothing is set to other, it is good to use for home office workers with a dyndns entry for their IP.You get the idea now?
-
@JaredBusch what internal network is there when it's hosted???
-
@bigbear said in Correct Settings For Hosted FreePBX 13:
@JaredBusch said in Correct Settings For Hosted FreePBX 13:
@bigbear said in Correct Settings For Hosted FreePBX 13:
@JaredBusch I'm gonna retry all this from scratch tonight. Maybe use a $10 vm. Not doing any "tuning" though.
I was thinking with pjsip on 5060 should in be trunking down to 5160 and chan_sip from my soft switch?
outbound trunks still use chan_sip out to the other end's port 5060 like you are familiar.
I feel you are overcomplicating this entire thing.
I mean, if your tftp is "internal" how do the remote phones access it? Lol. Just doesn't follow any firewall lingo I've ever used...
You set your DHCP server to tell devices to look to your PBX for TFPT, or you preset all phones with the provisioning URL before sending them out.
-
@bigbear said in Correct Settings For Hosted FreePBX 13:
@JaredBusch what internal network is there when it's hosted???
You obviously failed to read what I just just wrote.
I clearly stated that you need to understand that they are just labels to be friendly.
-
@JaredBusch your tftp is marked internal zone. Unless you have an onprem pbx it's not accessible from your local network.
You do know I'm only talking about hosted right?
I understand what they are doing here.
-
@bigbear said in Correct Settings For Hosted FreePBX 13:
@JaredBusch your tftp is marked internal zone. Unless you have an onprem pbx it's not accessible from your local network.
You do know I'm only talking about hosted right?
I understand what they are doing here.
You do not understand.
Internal has nothing to do with where it is.
It is a label. Nothing more.
Any network you apply the Internal label to will have access to any service also marked Internal.
Those screen shots are from a system hosted on Vultr and those redacted sites are 3 different locations across Illinois and Missouri.
-
@JaredBusch I'm trying to figure out then how my remote phone gets marked "internal", is that where it tagged when it authenticates through the adaptive firewall?
Still, telling me to f*** off and go to my pbx team is a little harsh.
I'll find some reading on the firewall and stop asking questions? Can't imagine why people get so defensive... i feel like openbts and vsat is infinitely more complicated than this. There's just no documentation, freeswitch has infinitely better docs available.
-
@bigbear said in Correct Settings For Hosted FreePBX 13:
Still, telling me to f*** off and go to my pbx team is a little harsh.
Trust me, I did not tell you to f*** off. I have no qualms telling someone on here to f*** off. Just ask the mods.
I told you to think about your proposition. Meaning to think about the cost/benefit to the business for trying to do something out of band.
-
@bigbear said in Correct Settings For Hosted FreePBX 13:
@JaredBusch I'm trying to figure out then how my remote phone gets marked "internal", is that where it tagged when it authenticates through the adaptive firewall?
I already told you how it gets marked internal. I even made a screenshot.
That is what I have been trying to tell you. There is nothing else here. you are making it too complicated.
