Samba Server Configuration in Centos 6.2
-
Samba shares can't be viewed in the browser. It can be viewed in file viewers that support SMB shares.
-
Are you trying to setup an FTP server or a SAMBA server? If you want to access it via a browser, that's FTP. If you want to access it as a share via something like Explorer, that's SAMBA (or FTP technically). What is the objective/big picture goal of this question? Provide us with context.
-
@thecreativeone91 said:
Samba shares can't be viewed in the browser. It can be viewed in file viewers that support SMB shares.
WebDAV could be setup to do this... although that is far beyond the scope of this question.
-
@coliver said:
@thecreativeone91 said:
Samba shares can't be viewed in the browser. It can be viewed in file viewers that support SMB shares.
WebDAV could be setup to do this... although that is far beyond the scope of this question.
But can WebDAV be set up in Samba? I don't believe so. Only in Apache. WebDAV shares aren't SMB shares.
-
Bottom line, Samba is an SMB server. SMB can't be viewed in a browser. The tool that you are using (Samba) does not match your goal (viewing shares in a browser.)
-
@scottalanmiller said:
Bottom line, Samba is an SMB server. SMB can't be viewed in a browser. The tool that you are using (Samba) does not match your goal (viewing shares in a browser.)
That's why I asked if he meant an FTP server and what the context behind his post was.
-
@thanksajdotcom said:
That's why I asked if he meant an FTP server and what the context behind his post was.
WebDAV or FTP, yeah.
-
Ugh FTP. Not really a fan of it for the most part.
-
My aim is to check whether the shared access for the RAID configured device works in another new motherboard.So,I need to use SAMBA(FTP) to view the files in the windows explorer.I have tried to create the SAMBA server in Centos machine but it was not able to access in Windows 7 Machine.
-
@Lakshmana said:
My aim is to check whether the shared access for the RAID configured device works in another new motherboard.So,I need to use SAMBA(FTP) to view the files in the windows explorer.I have tried to create the SAMBA server in Centos machine but it was not able to access in Windows 7 Machine.
Ah so you are wanting SMB shares. What steps have you taken so far to configure it? What did you do to try to access it?
-
@Lakshmana said:
So,I need to use SAMBA(FTP) to view the files in the windows explorer.
Okay this is very confusing. Samba and FTP are completely two different things. Completely.
Windows Explorer shows SMB (Samba) shares, and is not a browser.
Internet Explorer is a browser and will show FTP.
-
I think he's thinking he has to view the shares in the browser.
-
@thanksajdotcom said:
I think he's thinking he has to view the shares in the browser.
and he may be equating Explorer to INTERNET Explorer. Two totally different things.
-
@Lakshmana, it sounds like you want a SAMBA server for SMB shares. You do not want FTP in this case. SAMBA isn't too bad but setting it up on CentOS isn't something I've done. The key things are setting up the shares themselves, and the permissions. However, why do you need to setup a SAMBA server to test if a motherboard is working? Isn't the fact something booted and the OS is loading evidence enough?
-
@thanksajdotcom said:
You do not want FTP in this case. SAMBA isn't too bad but setting it up on CentOS isn't something I've done.
It's the same anywhere, once you've installed which is just "yum install samba"
-
@scottalanmiller said:
@thanksajdotcom said:
You do not want FTP in this case. SAMBA isn't too bad but setting it up on CentOS isn't something I've done.
It's the same anywhere, once you've installed which is just "yum install samba"
Ok. I've set it up but I had tutorials I was following. I don't remember all the steps off the top of my head. I know you have to setup shares in the smb.conf file and point to the directories, set permissions, etc. Also, creating groups and/or users is important too.
-
This is an example of one of my shares in my /etc/samba/smb.conf file.
[goflex_landcare] comment = GoFlex Landcare path = /media/goflex_landcare available = yes public = yes writable = yes browsable = yes guest ok = yes read only = no create mask = 0755 -
Now, I use the /media/goflex_landcare folder to mount my NAS into, but the principal is the same.
-
@thanksajdotcom My client company projects are Centos with RAID1.Last week there was an issue found at RAID 1.So my senior needs to check the basic things are working properly.The motherboard of my client is not working so they are trying to buy the motherboard othr Asus.So we are under going at testing whether the data can be accessed after changing the hard disk in other motherboard
-
@scottalanmiller said:
@thanksajdotcom said:
You do not want FTP in this case. SAMBA isn't too bad but setting it up on CentOS isn't something I've done.
It's the same anywhere, once you've installed which is just "yum install samba"
You probably want to install samba-common too and possibly the client.
