Photoshop/VM Lab: Workstation Spec?
-
Assuming this isn't going into production and will stay a lab system..
Stallard Tech is where I normally source this type of thing. They actually do offer workstations, which I'd normally tell you to head over to xByte. xByte doesn't do workstations tho.
-
At first glance I think you would be better suited with a i7 desktop for photoshop and a separate server.
-
Thanks for your input and help. As you can see hardware is not my forte. Here is what I am thinking if and why...
-
CPU: i7-7820X
https://www.amazon.com/gp/product/B072NF4BY3/ref=ox_sc_act_title_7?smid=ATVPDKIKX0DER&psc=1 -
MOBO: ASUS TUF X299 MARK I
https://www.amazon.com/gp/product/B071JBX9GN/ref=ox_sc_act_title_4?smid=ATVPDKIKX0DER&psc=1 -
Case: Rosewill 4U Rackmount Case, 12 Hot Swap Bays, 7 PCI
https://www.amazon.com/gp/product/B00N9CXGSO/ref=ox_sc_act_title_5?smid=ATVPDKIKX0DER&psc=1 -
PS: Corsair AXi Series, AX860i, 860 Watt (860W), Fully Modular Digital Power Supply, 80+ Platinum
https://www.amazon.com/gp/product/B00A0HZNDW/ref=ox_sc_act_title_3?smid=ATVPDKIKX0DER&psc=1 -
GPU: EVGA GeForce GTX 1060 3GB SC ACX 2.0, 3GB GDDR5, DX12 OSD Support (PXOC), Only 6.8 Inches Graphics Cards 03G-P4-6162-KR
https://www.amazon.com/gp/product/B01KU2CIIY/ref=ox_sc_act_title_6?smid=ATVPDKIKX0DER&psc=1 -
RAM: Corsair Vengeance 64GB (4x16GB) DDR4 3200 (PC4-25600)
https://www.amazon.com/gp/product/B01HKF48FU/ref=ox_sc_act_title_1?smid=ATVPDKIKX0DER&psc=1
Is short the "Why" is:
-
The CPU is 8 core/16 thread 3.6-4.5 GHz thinking the speed will help photoshop etc and the cores/threads will help VM/Lab. Also handles 128G RAM.
-
MOBO: "Rugged" series 5yr warrantee with better than normal heat dissipation. 2 x NVMe m2 , 6+ PCIe, USB 3.1 gen2 etc, etc. Handles 128G RAM
-
Case: at 4U 24" depth large enough for cooling/quieting. 12 3.5" hotswap. Will fit in my rack.
-
PS: seemed appropriate, but really have no idea
-
GPU: Recommended on some Photoshop builds, but really have no idea.
-
RAM: Seems CPU takes base speed of 2666 and handles up to 4000. 3200 wasn't much more than 2666. (Will add more later)
All in about $2k
Comments/suggestions are welcome. I didn't specifically reply to comments above, since this reply gives you a better sence of my intended direction. Again, hardware is not my expertise, so don't be shy.
Thanks!!!
-
-
Seems like drives and RAID controller are missing.
-
@mike-davis said in Photoshop/VM Lab: Workstation Spec?:
Seems like drives and RAID controller are missing.
yes
i have the drives except for .m2
Any recommendations for controller? An I right in assuming even the new cpu enabled raid on this chip/mobo is worthless? -
@ccclapp said in Photoshop/VM Lab: Workstation Spec?:
@mike-davis said in Photoshop/VM Lab: Workstation Spec?:
Seems like drives and RAID controller are missing.
yes
i have the drives except for .m2
Any recommendations for controller? An I right in assuming even the new cpu enabled raid on this chip/mobo is worthless?It's most likely fakeRAID, which is less than worthless, yes. I like LSI cards (It's the manufacturer Dell re-brands for their PERC cards.)
-
@ccclapp said in Photoshop/VM Lab: Workstation Spec?:
An I right in assuming even the new cpu enabled raid on this chip/mobo is worthless?
Correct, mobo RAID or chipset RAID have become standard codes for FakeRAID.
-
@travisdh1 said in Photoshop/VM Lab: Workstation Spec?:
@ccclapp said in Photoshop/VM Lab: Workstation Spec?:
@mike-davis said in Photoshop/VM Lab: Workstation Spec?:
Seems like drives and RAID controller are missing.
yes
i have the drives except for .m2
Any recommendations for controller? An I right in assuming even the new cpu enabled raid on this chip/mobo is worthless?It's most likely fakeRAID, which is less than worthless, yes. I like LSI cards (It's the manufacturer Dell re-brands for their PERC cards.)
I prefer Adaptec, no lying about RAID 10 and no intentional crippling.
-
@scottalanmiller said in Photoshop/VM Lab: Workstation Spec?:
I prefer Adaptec, no lying about RAID 10 and no intentional crippling.
Thanks Scott, which model?
-
This one?
Adaptec 2244100-R 5805 8-Channel SATA/SAS 512MB PCI-Express LP RAID Controller with Cable Kit
https://www.amazon.com/Adaptec-2244100-R-8-Channel-PCI-Express-Controller/dp/B0015DVE5G/ref=sr_1_1?ie=UTF8&qid=1505281599&sr=8-1&keywords=Adaptec+RAID -
Change mainboard. It looks really cool, I would want it in my gaming PC, but for business or anything work related you do not want it. Asus support is horrible. Go with Supermicro.
The same thing with case. I had very similar model, and it didn't lineup with units on rack. It will take 6u space, half above and half below, and if you plan to add additional gear, you'll end up with gaps. Supermicro is my choice here again, you can get really nice cases with even triple redundant power supplies.
-
@marcinozga said in Photoshop/VM Lab: Workstation Spec?:
Change mainboard. It looks really cool, I would want it in my gaming PC, but for business or anything work related you do not want it. Asus support is horrible. Go with Supermicro.
The same thing with case. I had very similar model, and it didn't lineup with units on rack. It will take 6u space, half above and half below, and if you plan to add additional gear, you'll end up with gaps. Supermicro is my choice here again, you can get really nice cases with even triple redundant power supplies.
Thanks for the feedback.
I will look at supermicro again. I went to their site yesterday and couldn't determine if they have motherboards for this PC and generic cases, I must not have looked carefully enough.
-
Look at their server mainboards and cases. They have single socket boards too.
-
Only one, maybe two, PCIe slots for GPU. Remember even a single PCIe slot will be dramatically more (maybe 10x) the power you were expecting in your old design. And instead of being shared between five people, it is dedicated to one. This design doesn't match with your needs from your previous server based design.
-
@ccclapp said in Photoshop/VM Lab: Workstation Spec?:
This one?
Adaptec 2244100-R 5805 8-Channel SATA/SAS 512MB PCI-Express LP RAID Controller with Cable Kit
https://www.amazon.com/Adaptec-2244100-R-8-Channel-PCI-Express-Controller/dp/B0015DVE5G/ref=sr_1_1?ie=UTF8&qid=1505281599&sr=8-1&keywords=Adaptec+RAIDAwfully low end. You'd feel the performance lag.
-
@marcinozga said in Photoshop/VM Lab: Workstation Spec?:
Look at their server mainboards and cases. They have single socket boards too.
Sorry to be dumb, but, if looking at SM MB, is anything w socket 2066 compatible? If not, what spec do I filter by to determine compatibility? I cannot have a full depth server box because my rack is only two post. I believe I can go 24 to 25 inches but that's it. ideally I would go 3U, but I assume 4U will give me better room for quiet fans/cooling etc.
-
@scottalanmiller said in Photoshop/VM Lab: Workstation Spec?:
@ccclapp said in Photoshop/VM Lab: Workstation Spec?:
This one?
Adaptec 2244100-R 5805 8-Channel SATA/SAS 512MB PCI-Express LP RAID Controller with Cable Kit
https://www.amazon.com/Adaptec-2244100-R-8-Channel-PCI-Express-Controller/dp/B0015DVE5G/ref=sr_1_1?ie=UTF8&qid=1505281599&sr=8-1&keywords=Adaptec+RAIDAwfully low end. You'd feel the performance lag.
Going up from that gets me to about 1/3 cost of entire rig for card, ie $500-1k for card. Are ebay ones worthy? Do you know models to look for? Thanks
-
@mike-davis said in Photoshop/VM Lab: Workstation Spec?:
At first glance I think you would be better suited with a i7 desktop for photoshop and a separate server.
There's no server workload portion. Just local processing of local data.
-
@ccclapp said in Photoshop/VM Lab: Workstation Spec?:
I cannot have a full depth server box because my rack is only two post.
You should not have this in a rack, this goes at your desk. Your keyboard, mouse and monitor cables don't like being run through walls. This is a desktop, not a server.
-
@scottalanmiller said in Photoshop/VM Lab: Workstation Spec?:
Only one, maybe two, PCIe slots for GPU. Remember even a single PCIe slot will be dramatically more (maybe 10x) the power you were expecting in your old design. And instead of being shared between five people, it is dedicated to one. This design doesn't match with your needs from your previous server based design.
I can well imagine meeting more than one – two slots: GPU, 10 GBE, additional 1 GBE, etc. etc. . don't I want a board with expansion room?
