ML
    • Recent
    • Categories
    • Tags
    • Popular
    • Users
    • Groups
    • Register
    • Login

    Needs Hint on E1 PRI Link

    IT Discussion
    3
    4
    1.0k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • F
      Farhad Farahmand
      last edited by

      Dear All ,

      I am getting none stop of error on my E1 Gateway . Can you please hint me where could be the issue .

      [2016-12-22 04:09:41] NOTICE[1047]: chan_dahdi.c:13484 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 2
      [2016-12-22 04:09:41] NOTICE[1047]: chan_dahdi.c:13484 pri_dchannel: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 2
      [2016-12-22 04:09:41] NOTICE[1047]: chan_dahdi.c:13484 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 2
      [2016-12-22 04:09:41] NOTICE[1047]: chan_dahdi.c:13484 pri_dchannel: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 2
      [2016-12-22 04:09:41] NOTICE[1047]: chan_dahdi.c:13484 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 2
      [2016-12-22 04:09:41] NOTICE[1047]: chan_dahdi.c:13484 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 2
      [2016-12-22 04:09:41] NOTICE[1047]: chan_dahdi.c:13484 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 2
      [2016-12-22 04:09:41] NOTICE[1047]: chan_dahdi.c:13484 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 2
      [2016-12-22 04:09:41] NOTICE[1047]: chan_dahdi.c:13484 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 2
      [2016-12-22 04:09:41] NOTICE[1047]: chan_dahdi.c:13484 pri_dchannel: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 2
      [2016-12-22 04:09:41] NOTICE[1047]: chan_dahdi.c:13484 pri_dchannel: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 2
      [2016-12-22 04:09:41] NOTICE[1047]: chan_dahdi.c:13484 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 2

      Thank you so much in advance

      1 Reply Last reply Reply Quote 1
      • thwrT
        thwr
        last edited by thwr

        "The HDLC Abort(6) message is actually not an error (or even a warning). It is a notice message generated by Asterisk, indicating that a frame on the span failed a consistency check and is being discarded or ignored." ... "It is not uncommon to see some HDLC Abort(6) messages on a perfectly normal PRI connection from time to time. The only time to be concerned about this message is if you see a lot of them, or if they appear to stream constantly to the CLI or Asterisk log."

        http://kb.digium.com/articles/Configuration/What-does-HDLC-Abort-6-mean

        1 Reply Last reply Reply Quote 1
        • thwrT
          thwr
          last edited by

          I'm not an Asterix expert, but this looks more serious:

          [2016-12-22 04:09:41] NOTICE[1047]: chan_dahdi.c:13484 pri_dchannel: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 2
          [2016-12-22 04:09:41] NOTICE[1047]: chan_dahdi.c:13484 pri_dchannel: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 2

          http://www.asteriskguru.com/tutorials/hdlc_bad_fcs.html

          scottalanmillerS 1 Reply Last reply Reply Quote 0
          • scottalanmillerS
            scottalanmiller @thwr
            last edited by

            @thwr here is what the info page had to offer:

            1. Problem Description:

            If you sometimes see this error on a zaptel card, this might be caused by a network card or a harddisk taking an interrupt for too long. This will cause the calls to be dropped.

            This might be caused by:

            • Too much I/O activity
            • bad hardware
            • bad drivers

            If you see this error non stop scrolling on the asterisk CLI, you probably made a configuration error,

            Doublecheck your coding / framing specified in zaptel.conf.
            The below settings worked.

            1. Possible solutions:

            • If you are using an intel 100mbit network card, try replacing the standard drivers with the drivers from the intel website. The drivers included in the kernel have some latency problems

            • replace on board nics with some add-in cards

            • Try looking if you have any shared interrupts, and try playing with disabling onboard network cards and plugging in new ones.
              See also here

            • Try replacing SATA controllers with IDE controllers and tweak the hdparm settings. see this tutorial

            • Stop using the harddisk on the server as much. (get rid of updatedb lines in the cron jobs).

            • upgrade to a dual cpu system, more cpu's = an extra cpu to take an interrupt if the first one is busy with an interrupt that is waiting too long.

            • If you are using a dual port or quad port PRI digium card, you could try to do the hdlc in hardware instead of in software.

            • enable ACPI in the kernel config

            • enable your chipset in the kernel config

            1 Reply Last reply Reply Quote 1
            • 1 / 1
            • First post
              Last post