Different CPU types in XenServer pool
-
@flomer said:
We are a business, but have a small budget. Sigh...
I feel your pain there!
@flomer said:
I am also playing with View, and thinking about virtualizing a few workstations that have powerful GPUs -- for that to work we need full licenses in order for vGPU to work, and this will be prohibitively expensive when we are just talking about 5 users...
Yeah, that's what a lot of organizations run into... It usually doesn't make sense to virtualize entire workstations unless you're talking about a couple hundred users to start. It is fine if you are testing for viability though.. . However, if you are a WIndows shop, I can recommend using Hyper-V for VDI (or just letting them run the applications inside of a regular remote desktop session!)... There's pros and cons to doing it both ways.
-
@flomer said:
OK. I just started the VM on the host with 1,9 GHz CPUs. When I run 'cat /proc/cpuinfo' it tells me that the "cpu MHz : 1908.811". Then I migrate the VM to the other host (with physical CPU of 3,1 GHz). The two hosts are not now in the same pool. When I run the same command after the migration it tells me that the CPU is still 1,9 GHz. The VM now has a vCPU of speed 1,9 GHz but is really running on a server with CPUs at 3,1 GHz.
You can't ask the VM about the hardware it is on! You have to ask the hypervisor. The VM is virtualized, it doesn't know anything.
-
@flomer said:
Well, I am just trying to make use of some old hardware here, and buying identical new(old) machines is out of the question.
But, if this means that the faster machine will have to be masked to a lower CPU speed in order to allow for VMs to be live migrated from one to the other in the pool, this means I will better utilize the machines if they are separate, and not pooled. Right?
I will instead have to use some other machines for the VMs that I would like to experiment with HA for. I have three other Intel-based older machines that have identical CPUs, so for this pool this will not be an issue.
No, again, you are confused. The CPU speed cannot be determined by the VMs. You can't figure out what the speed is from them, nor can you set the speed. Using the VM to look at ANY hardware is nonsensical and will only lead you to weird conclusions. You should not be using VM tools like this as if this is hardware.
Don't even make yourself aware of this as it has you value to you.
-
@flomer said:
Yes. At the moment we are having two different Essentials Plus environments, and I must say I am at times very frustrated about the limitations. I mean, why not 5 hosts instead of just three (6 CPUs)??
If you are running VMware Essentials Plus you aren't a poor IT department with a tight budget. That licensing is very, very far into the "flaunting how much money we can throw away" category. That's huge money and the only reasons to have the Plus is because you make so much money that downtime of even a couple of minutes is worth a fortune AND you can flaunt that you aren't doing it cheaply and don't need more features.
Being tight on finances and having VMware don't go together.
-
@flomer said:
We are a business, but have a small budget. Sigh...
You are doing very expensive things or considering them for a business with a small budget. Most companies in the SMB category can run their entire IT infrastructure, hardware and all, for the cost of your VMware licenses alone! And VDI is extremely expensive as well, that's not for a tight budget shop. It has its place, but it is about saving labour at massive scale and has almost no applicability to the SMB market.
-
@dafyre said:
@flomer I'm not 100% certain that is the case in XenServer, but I know that was the case when I used coughvmwarecough.
It has to, it can't change the speed. It's not physically able to do that. Look at another VM running on the same proc and it will report the full speed. Obviously only one can be correct, and the one that is showing the actual processor speed that is possible will obviously be the correct one
-
@flomer said:
Well, it's on our lab network, and I am playing with and learning XenServer at the moment. I might move some of our production servers from vSphere to XenServer if things work out nicely.
That's the way to go. XenServer gives you so much more and does so for so much less money.
-
I know someone here in the community that recently made the move from VMware to XenServer and actually saw their servers get a 20% performance increase on the same hardware!
-
@flomer said:
OK, I guess I could try and test it if I have the time soon
Did you get a chance to test?
