@scottalanmiller Yes, FreePBX 15.0.23, EndPoint Manager15.0.48.1
Best posts made by goodtm
-
RE: Changing extension mapping in Endpoint Manager Asterisk
Latest posts made by goodtm
-
RE: Changing extension mapping in Endpoint Manager Asterisk
@JaredBusch Is it necessary to specify the [endpoint] command? It works for me even without specifying this command [endpoint]. For example, sip notify reboot-yealink 4287 or sip notify restart-yealink 4287 (depending on what I specified in the configuration file)
-
RE: Changing extension mapping in Endpoint Manager Asterisk
@JaredBusch Thanks for the help. Yes, I'm not quite familiar with the freepbx and endpoint manager settings yet. But I guessed that would be the result. It turns out I did everything right. It was only necessary to get a professional answer to make sure that I did not miss the right solution to my question. I found a solution to reboot phones via sip-notify earlier on this forum.
-
RE: Changing extension mapping in Endpoint Manager Asterisk
Forgot to add. After adding a new extension mapping in the Endpoint Manager module and pressing send to phone, the phone does not receive a new extension. The phone remains with the old extension until the phone is rebooted, or you can manually download the configuration via autoprovision via the phone web interface
-
RE: Changing extension mapping in Endpoint Manager Asterisk
@scottalanmiller Yes, FreePBX 15.0.23, EndPoint Manager15.0.48.1
-
Changing extension mapping in Endpoint Manager Asterisk
Hello. I've been looking everywhere, but I haven't found a solution to my question yet. We use the Endpoint Manager module. In it, you can create mapping of an extension number from an asterisk with IP phones (Extension Mapping). Everything works in this part. But if it is necessary to change the extension number in the IP phone, difficulties begin. I did not find in the module how to do a simple change of extension numbers in the phone. So far, I am changing extensions as follows - I delete the existing mapping of the extension number with the phone. I add a new mapping of the extension number to the phone, and reboot the phone. But to restart the IP phone, you need to do a lot of actions. You need to go to the phone's web interface and reboot from there, you can reboot with a command from asterisk, you can also turn off the power and turn on the phone again. And if there are a lot of phones, how many extra actions will you have to do? Perhaps there is a correct way to change the old extension number mapping to a new number in the Endpoint Manager module, without unnecessary actions to manually restart the phone? IP phones Yealink