XenServer 7 has launched!
-
@BRRABill said
Apparently this was NOT fixed in XS7.
As @JaredBusch would say ... FFS!
@olivier ... what have you seen that they HAVE fixed? You said replication, right? (Sorry if I asked this twice, LOL.) I don't have a second XS7 set up yet (soon) so I can't tell what that speed is like.
-
I started watching the bug and voted for it. Fourteen people now watching it.
-
@scottalanmiller said
I started watching the bug and voted for it. Fourteen people now watching it.
And hopefully threw some traffic this way.
Good job!
-
@BRRABill said in XenServer 7 has launched!:
@scottalanmiller said
I started watching the bug and voted for it. Fourteen people now watching it.
And hopefully threw some traffic this way.
Good job!
This is a good place to discuss XenServer issues
-
@BRRABill Replication uses export from one XS and pipe it to the import of another one. So in any case, it's import/export.
-
@scottalanmiller said in XenServer 7 has launched!:
There is no file serving or anything internally?
Sure there is, but we're talking Word and Excel files (and not million line Excel files either, usually just a few hundred KB). So we go from a second to sub-second transfers. Not sure that's worth spending money on.
But now we're beating a dead horse again because we are replacing the switches now because we want POE for VOIP phones.
-
@olivier said
@BRRABill Replication uses export from one XS and pipe it to the import of another one. So in any case, it's import/export.
OK, when I get my second XS7 stood up, I will run a test from XO and let you know.
Still, seems very strange that everything is copying perfectly EXCEPT exporting from XS, especially given all the other people with issues.
I wonder why yours is working. "What's your secret????" I ask, wanting to hurry these exports the heck up!
If anyone else has XS7 set up already, if you get some time, export a small VM and see what speeds you get.
-
One thing I noticed today is that XS7 dropped the Server 2003 template. Not a huge deal, obviously.
Also, their XenTools no longer work. You have to use XenLegacy.
-
@BRRABill said in XenServer 7 has launched!:
One thing I noticed today is that XS7 dropped the Server 2003 template. Not a huge deal, obviously.
Also, their XenTools no longer work. You have to use XenLegacy.
The xo-tools don't work for server 2003?
Or just don't work?
-
@DustinB3403 said
The xo-tools don't work for server 2003?
Or just don't work?
-
As ok that makes sense.
-
-
So it looks like it installs the PV stuff, just not the agent.
That might be the same as XS6.5 since they seem to have changed some stuff around in that arena.
-
@BRRABill Still have 6.5 in production here, but i just exported xoa disk in 5 minutes to a usb disk at my desk. 5min17s for 8GB
I then just exported it to my c:\ which is an ssd
same 8GB, 4m48sWhat are you choosing for the network interface for xfer vm that xen uses?
-
@momurda said
What are you choosing for the network interface for xfer vm that xen uses?
My server has (4) 1GB ports. I have the management interface on one of those, by itself.
-
This post is deleted! -
@momurda said in XenServer 7 has launched!:
@BRRABill Still have 6.5 in production here, but i just exported xoa disk in 5 minutes to a usb disk at my desk. 5min17s for 8GB
I then just exported it to my c:\ which is an ssd
same 8GB, 4m48sWhat are you choosing for the network interface for xfer vm that xen uses?
Also, are you doing a copy, backup, or export? Like an export in straight export?
And did you mean to ask what interface I have XO on? That is where it would export from. Or, through, rather.
I would LOVE to get this friggin' issue figured out.
-
I was exporting from Xencenter. I just shut the vm down and export.
I am talking bout this page
Network 0 is the default. However you have to either manually configure ip or have dhcp setup on your management network for that to work. I just set this to a vlan that i know dishes out dhcp, only for the xfer vm.
I was thinking perhaps you are hitting a bottleneck here if your settings force this go through a router that doesnt do Gb.
I hit about 400mbps (not constantly, but consistently) doing exports this way, during middle of the day. I could test when nobody is around later and hit a bit higher througput. -
@momurda said
I was thinking perhaps you are hitting a bottleneck here if your settings force this go through a router that doesnt do Gb.
I hit about 400mbps (not constantly, but consistently) doing exports this way, during middle of the day. I could test when nobody is around later and hit a bit higher througput.The machines I am exporting from/to are on the same switch.
-
@momurda said
I was thinking perhaps you are hitting a bottleneck here if your settings force this go through a router that doesnt do Gb.
I hit about 400mbps (not constantly, but consistently) doing exports this way, during middle of the day. I could test when nobody is around later and hit a bit higher througput.I finally got iPerf to work on the XS host.
Here are the results. Pretty sure it's not the connection.
[ 3] local 10.0.4.30 port 55737 connected with 10.0.4.40 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.0 sec 1.09 GBytes 938 Mbits/sec