Problem with SonicWall Port Forwarding
-
At least to get started, use port 8080 in both places. Unless port 8080 is already used on your outside interface.
-
@scottalanmiller I can use 8080. I dont know how to open that port on the SW.
-
@alex.olynyk said:
@scottalanmiller I can use 8080. I dont know how to open that port on the SW.
Well that's the first task
If you've not gotten around to opening the firewall yet, it shouldn't be surprising that it isn't open yet.Did you look at the instructions like that Jared sent? It looks like it steps you through the process.
-
@scottalanmiller said:
@
Yes. In one of the screenshots it lists a Source Port field. I dont have that field. In another screenshot I see Create a reflexive policy. I dont have that either.
-
@alex.olynyk said:
@scottalanmiller said:
@
Yes. In one of the screenshots it lists a Source Port field. I dont have that field. In another screenshot I see Create a reflexive policy. I dont have that either.
You mean those options just don't exist? Argh, SonicWall sucks SO much!!!
-
@scottalanmiller Yes.
-
Ugh, is your firmware up to date?
-
@alex.olynyk What is your Sonicwall model? Your snapshot wizard looks different from the NSA series if am not mistaken. If its a low end version like TZ series, try this and setup using the rule wizard.
http://www.noip.com/support/knowledgebase/port-forwarding-on-the-sonicwall-tz-150-wireless-router/ -
Ah, good catch. I've not used a SW in a good long while, thankfully. We always just tell clients to pull and toss 'em. One of the few pieces of gear that is well worth just replacing. Cheaper to replace than to support.
-
@Ambarishrh NSA 2400
-
@scottalanmiller said:
Ah, good catch. I've not used a SW in a good long while, thankfully. We always just tell clients to pull and toss 'em. One of the few pieces of gear that is well worth just replacing. Cheaper to replace than to support.
And that is all the review I need, dang, staying away.
-
@alex.olynyk Thats strange, then you might not be running sonicOS enhanced. I've used Sonicwall NSA 5 years ago, so might not be up to date!
Did you check the rules wizard by the way?
-
@alex.olynyk said:
@Ambarishrh NSA 2400
The same sonicwall I've.
First update the firmware, last version is:
5.9.1.5-16o Jan 04, 2016
-
@iroal said:
@alex.olynyk said:
@Ambarishrh NSA 2400
The same sonicwall I've.
First update the firmware, last version is:
5.9.1.5-16o Jan 04, 2016
can you get a screen shot of the port forwarding section?
-
@scottalanmiller said:
@iroal said:
@alex.olynyk said:
@Ambarishrh NSA 2400
The same sonicwall I've.
First update the firmware, last version is:
5.9.1.5-16o Jan 04, 2016
can you get a screen shot of the port forwarding section?
In Sonicwall is called Nat Policies
In this example a make a Nat in LAN, to our Exchange Server in X1 Network, Lan.
-
Can you make a quite walkthrough for the OP of how to port forward 8080 on the outside to 8080 on a specific IP inside?
-
@scottalanmiller said:
Can you make a quite walkthrough for the OP of how to port forward 8080 on the outside to 8080 on a specific IP inside?
It's easy.
-
Network-->Address Object.
Create an Address Objects with the name and Ip of the server -
Network->NAT Policies.
Add an entry with the Address Object you create before and the port number. -
Firewall-->Access Rules-->Matrix-->Wan to Lan
Create and entry with the port you want to open from Wan to Lan.
That's all.
-
-
Thanks
-
I updated the firmware and its working now. Thank you to all who helped.
