Installing Snipe-IT on CentOS 7 and MariaDB
-
@DustinB3403 That's what I thought, but I believe that's what I did. I created a name "cwi-assets" .
The IP of server is 10.0.0.168
When I browse to the IP 10.0.0.168 the address bar changes to the FQDN I setup as I was hoping and then I have this error:
-
@DustinB3403 my router is pushing OpenDNS to all devices, would this be part of the issue? My laptop maybe not using same DNS?
-
@Robblehead No your laptop should be using the same DNS unless your not on that network.
Which is possible (just not sure why you wouldn't know that.... no offense).
Did you complete the installation process, I believe @JaredBusch posted a simple "how to" a short while ago in this very topic.
Yeah. right here: https://mangolassi.it/topic/6967/installing-snipe-it-on-centos-7-and-mariadb/119
-
@DustinB3403 no offense taken at all.
I had tried a couple different methods already listed with no luck.
I did the exact process @JaredBusch just left and tested working:
-
@DustinB3403 I only mentioned the DNS because I haven't seen the DNS listing when I look up the IP
-
installing.
And works perfectly. If I navigate to the IP instead of the FQDN, it redirects me.
-
@Robblehead said in Installing Snipe-IT on CentOS 7 and MariaDB:
@DustinB3403 That's what I thought, but I believe that's what I did. I created a name "cwi-assets" .
The IP of server is 10.0.0.168
If you ping cwi-assets from your desktop, does it respond with 10.0.0.168?
-
-
-
That is your problem. edit your hosts file locally. and it will work.
-
@JaredBusch I left anonymous users and allowed root login remotely. Those are the only other changes I made other than FQDN name
-
@Robblehead said in Installing Snipe-IT on CentOS 7 and MariaDB:
@JaredBusch I left anonymous users and allowed root login remotely. Those are the only other changes I made other than FQDN name
Those should never be allowed. That is database access not the CentOS access.
-
@JaredBusch ok
-
-
-
@JaredBusch You have made fire!
-
@Robblehead You will want to properly get that DNS entry in your router or something so that all your devices work.
Editing your hosts file should only be a quick workaround that is used temporarily.
-
@JaredBusch One last question, this is a test environment. When I move into production it will have a new IP address which shouldn't be a big deal but I am wondering if I will have to modify host file of every system that will be using snipe?
-
@JaredBusch answered my question for me. The production environment is running a sonicwall so I am pretty sure I can handle that side with Dell's help. (I know it's capable)
-
@Robblehead said in Installing Snipe-IT on CentOS 7 and MariaDB:
@JaredBusch One last question, this is a test environment. When I move into production it will have a new IP address which shouldn't be a big deal but I am wondering if I will have to modify host file of every system that will be using snipe?
Don't modify the local host file, use a proper DNS entry on your router (or DNS server if you have one)
