Building Out XenServer 6.5 with USB Boot and Software RAID 10
-
Can't find
md0 in /etc/fstab or /etc/mtab -
-
-
@scottalanmiller said:
@DustinB3403 said:
Can't find
md0 in /etc/fstab or /etc/mtabShould not be there, right?
I added an entry into fstab. It may have a typo...
-
fstab
-
fstab corrected, entry reversed.
mount raid10 mount: /mnt/raid10 is not a block device -
Your could run
mdadm --examine --scan >> /etc/mdadm/mdadm.conf
To recreate the conf and see if it fixes the problem. /dev/md/0 should be a symbolic link to /dev/md0
-
@Romo Same response when reexamining the disks. this is for both
mount /mnt/raid10 && mount /dev/md10
-
mount /dev/md0 /mnt/raid10 ?
-
/dev/md0 not md10
-
Using RAID 10 in names anywhere is very confusing and hard to read. I think several of these issues are partially stemming just from poor naming conventions. Name mount points by purpose, not technology.
-
You can't mount /dev/md0, because according to the mdadm --examine --scan ouput, the array, is at /dev/md/0
-
@Romo said:
You can't mount /dev/md0, because according to the mdadm --examine --scan ouput, the array, is at /dev/md/0
Good eye, that was hard to see.
-
What is the ouput for:
cat /dev/md/md-device-map -
cat /dev/md/md-device-map cat: /dev/md/md-device-map: No such file or directory -
@DustinB3403
ls /dev/ | grep md -
-
@DustinB3403 can you please show us the output of your mdadm.conf file, last time I believe it was cut off because the UUID's dont show.
-
There is now a new record (3rd line)
-
That can't be right. I'm sure only one of those lines is supposed to be there.
