Server 2012R2 Long Boot Time Caused By Additional non-RAID HDD On RAID controller
-
@DustinB3403 Thanks Dustin. I will take a look. I will check to see if that service is running after I log into Windows after the long boot.
-
It'll probably be much easier to test without the drive connected first, as this way you can jump right into services.msc while monitoring what services are actually starting.
Then to test with the drive afterwards.
-
So what exactly is he looking for, Dustin? Are you thinking the server service will be timed out (no running) when the drive is connected?
-
A extreme delay in the service(s) actually starting. Again, I'm just guessing in this case, but that service host all drives and network share fucntions, and has caused massive delays in my experience when a drive is having issues.
Sort the list by Start-Up Type and Automatic. Anything that should be starting automatically, will be at the top, and things that are taking a long time will just sit at the top of the list.
-
But let's assume that, like my NIC problem, that the system just gives up on whatever the problem is, and the service just starts anyway?
I know there is software out there that can track what processes take what time to start at bootup, though I don't know any names of them off the top of my head.
A quick search turned up these two pages
http://lifehacker.com/5089839/track-down-startup-programs-and-processes-with-a-comprehensive-guide
-
In our case (as I believe I said [not being snark]) the issue was specific to a failed External USB RAID device, which when the failed drive was replaced (or the USB RAID device was removed) the system booted without issue.
Once the drive was replaced and resilvered the boot issue was resolved.
You've added some good information on trying to pinpoint the issue though.
-
@DustinB3403 said:
In our case (as I believe I said [not being snark]) the issue was specific to a failed External USB RAID device, which when the failed drive was replaced (or the USB RAID device was removed) the system booted without issue.
Once the drive was replaced and resilvered the boot issue was resolved.
You've added some good information on trying to pinpoint the issue though.
No snark
- I am seriously asking what would I expect to find in your situation when troubleshooting it? -
Specifically, I would be monitoring for extremely slow service start-up due to a drive issue. (and pinpointing which service is the issue)
Compared to when the issue doesn't present it's self.
In my issue I simply removed the external drives rebooted, saw that the issue wasn't persistent. With this knowledge, I then connected the drive, rebooted the system, and pinpointed the cause (as in our case) the cause wasn't obvious.
-
@DustinB3403 said:
Specifically, I would be monitoring for extremely slow service start-up due to a drive issue.
Where do you look for that? Event logs?
-
In this recent issue, I was able to actually just watch the services.msc window without the drive
Compared watching the system start-up and services.msc (all network shares in a non-functional state) with the drive connected, as the system was trying to mount and share this external drive.
-
Do you have a Non-RAID sata port to connect the single drive to?
-
@dafyre Unfortunately there is only 1 SATA Controller on the Tyan boards. The other board has its own onboard controller that could be used, but the LSI is wired to the backplane that the HDDs are slid into, so I would have to do some rewiring. Which is possible, but I will need to figure out how to fix this problem either way.
Thanks for help everyone, Im hoping I can get it figured out. I am seriously considering some kind of issue with Server 2012R2 and this type of configuration. Does anyone else have this configuration or could mock it up to see if you experience the same problems?
