USB as a Main Storage device
-
@scottalanmiller Exactly the same as what I've got.
-
You followed the steps there?
-
@scottalanmiller No, I thought you were just using it for reference. I'll start in just a moment.
-
Well I wanted to see if it was the same BIOS or not, they can change between generations but do not always. It might give us some steps that we were not aware of.
-
@scottalanmiller I toyed around with the config for a few hours (the above guide didn't work for me, a few of the options weren't there), and after trying different combinations of Virtual Drive settings, I now have the Raid 0 Configured, the USB virtual drives figured out if we want to use a single USB as both installation storage media, and I have XenServer installing now. The BIOS update didn't work, but it's all working properly without it. Turns out I had just not seen every setting. I'm not an expert on this stuff
-
Awesome, so we are moving forward!!
-
@scottalanmiller We certainly are!
-
Well @Mike-Ralston now you do know. Learning the best way possible.
-
@scottalanmiller said:
Awesome, so we are moving forward!!
Speaking of moving forward... What's the next step?
-
Is XenServer fully installed? We need XenCenter installed on the Windows box in the lab.
-
@scottalanmiller Both already done.
-
Sweet, is XenCenter attached to the XenServer so that you can see it from there?
-
@scottalanmiller No. How do I go about doing that?
-
Try this, on the XenCenter machine go to Add New Server in the XenCenter application. You'll need the IP address and root password of the XenServer that you just built.
-
@scottalanmiller Is that all?
-
@Mike-Ralston said:
@scottalanmiller Is that all?
Yep. XenCenter is fairly easy... until it is time to update the server.
-
@scottalanmiller Windows box that XenCenter was on was just being extremely sluggish. The XenServer and XenCenter are linked now, and I can see the drive on the server and it's information and such.
-
Awesome! Now the next step will be connecting the SAN to the XenServer. I'll be able to help with that. In theory I should have access to the XenCenter now.
-
@scottalanmiller Well, XenCenter is on the same machine that the Drobo is set up on.
-
@Mike-Ralston said:
@scottalanmiller Well, XenCenter is on the same machine that the Drobo is set up on.
That's very handy, everything in one place.
