Onlyoffice vs Collabora in Nextcloud

stacksofplates

@brandon220 said in Onlyoffice vs Collabora in Nextcloud:

@stacksofplates Ok. Fair Enough... I have the NC server and the nginx both as VMs (fedora 30) in Hyper-V. Would you recommend setting up another Fedora 30 vm just to run Docker or perhaps another OS? I have ZERO experience with Docker.

You could. I'd just spin up a Fedora 30 vm, install podman and run the command I showed. Then just point NextCloud to that.

You don't need Docker. You just need a container runtime engine, podman is pretty awesome

Make sure to open whatever port you use on the host. If you want to use 80, you'll need to be root. If you use something like 8080:80 you can do it without root.

brandon220

When I enter the OO server in the app on NC (16), it will only allow me to put in an http address. How did you get around this?

stacksofplates

@brandon220 said in Onlyoffice vs Collabora in Nextcloud:

When I enter the OO server in the app on NC (16), it will only allow me to put in an http address. How did you get around this?

Not sure. I didn't have HTTPS set up. Are you accessing Nextcloud without HTTPS? I thought it was forced to use whatever method you are using to connect.

brandon220

@stacksofplates I am accessing as HTTPS. That is my issue with the proxy. It is breaking the connection to the document server somehow. I installed podman and I get errors when trying to pull down the container. Troubleshooting that now.

stacksofplates

@brandon220 said in Onlyoffice vs Collabora in Nextcloud:

@stacksofplates I am accessing as HTTPS. That is my issue with the proxy. It is breaking the connection to the document server somehow. I installed podman and I get errors when trying to pull down the container. Troubleshooting that now.

What address are you using for the document server? Are you using the internal address or the FQDN from the proxy and doing it through the proxy?

black3dynamite

Will you show us your nginx config for OnlyOffice?

brandon220

@stacksofplates FQDN because of the requirement for https. I only have 1 static ip on the WAN side hence the reason for the proxy. I could try putting certs directly on the OO server and using a different port. Just seems like a bunch of extra steps versus they way I would think it should work.

brandon220

@black3dynamite Yes, I can grab it and post it this afternoon.

stacksofplates

@brandon220 said in Onlyoffice vs Collabora in Nextcloud:

@stacksofplates FQDN because of the requirement for https. I only have 1 static ip on the WAN side hence the reason for the proxy. I could try putting certs directly on the OO server and using a different port. Just seems like a bunch of extra steps versus they way I would think it should work.

No you shouldn't need to do that. So you're accessing Nextcloud through HTTPS and it's forcing you to use HTTP to connect to OO? I wonder if it's because the interface on Nextcloud isn't using HTTPS because you're terminating the TLS at NGINX not the Nextcloud server itself. Just to get it working see if you can enter the IP of the OO server through HTTP there.

brandon220

@stacksofplates True.... I was overthinking it.

If I try to use the local ip, it throws a mixed content error regarding https.

Error when trying to connect (Mixed Active Content is not allowed. HTTPS address for Document Server is required.)

stacksofplates

@brandon220 said in Onlyoffice vs Collabora in Nextcloud:

@stacksofplates True.... I was overthinking it.

If I try to use the local ip, it throws a mixed content error regarding https.

Error when trying to connect (Mixed Active Content is not allowed. HTTPS address for Document Server is required.)

ok kind of cheating but what if you do -p 443:80 to the container instead of -p 80:80? Does it let you fake https then? I mean this would happen regardless of if it's a container or not. I guess I can see the point of Nextcloud wanting to not have mixed protocols but what about running things on localhost beside it? That seems like a strange decision.

brandon220

server {
    client_max_body_size 40M;
    server_name office.domain.org;
    proxy_set_header X-Forwarded-Host $http_host/editors;
    proxy_set_header X-Real-IP $remote_addr;
    proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
    proxy_set_header Host $host;
    proxy_set_header X-Forwarded-Proto $scheme;
    proxy_set_header X-NginX-Proxy true;
    proxy_redirect off;
    location / {
        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        proxy_set_header Host $http_host;
        proxy_set_header X-NginX-Proxy true;
        proxy_pass http://192.168.1.106;
        add_header X-Frame-Options "ALLOW-FROM https://nc.domain.org/" always;
        proxy_redirect off;
        # Socket.IO Support
        proxy_http_version 1.1;
        proxy_set_header Upgrade $http_upgrade;
        proxy_set_header Connection "upgrade";
    }
    ssl_stapling on;
    ssl_stapling_verify on;
    ssl_session_cache shared:SSL:10m;
    add_header Strict-Transport-Security "max-age=31536000; includeSubdomains";
#    listen 80;

    listen 443 ssl; # managed by Certbot
    ssl_certificate /etc/letsencrypt/live/office.domain.org/fullchain.pem; # managed by Certbot
    ssl_certificate_key /etc/letsencrypt/live/office.domain.org/privkey.pem; # managed by Certbot
    include /etc/letsencrypt/options-ssl-nginx.conf; # managed by Certbot
    ssl_dhparam /etc/letsencrypt/ssl-dhparams.pem; # managed by Certbot

}
server { listen 80; location / { proxy_pass_header Server; proxy_pass http://nc/; } }
server {
    client_max_body_size 40M;
    listen 80;
    server_name office.domain.org;
    return 301 https://$host$request_uri;

stacksofplates

So even without HTTPS and pointing Nextcloud to NGINX for accessing Onlyoffice it doesn't work. I would run Onlyoffice with both https and http ports open and see if it works directly accessing Onlyoffice like you did above.

podman run -it -d -p 443:443 -p 80:80 --restart=always onlyoffice/documentserver

JaredBusch

@brandon220 said in Onlyoffice vs Collabora in Nextcloud:

proxy_pass http://192.168.1.106;

Your backend box has no SSL. Likely something is getting confused. Wordpress has problems like this when behind a proxy.

Make a snapshot, add a self signed cert on your backend system and change the proxy to point to that.

What does that do to your functoinality?

brandon220

@JaredBusch I’m sure you are right. I can access the document server via https through the proxy with the current config. Nextcloud can connect to it https. There is an error however in the browser (when you open the developer tools and view the console) and the document content never loads. I am trying so hard to avoid installing Docker, podman, etc on the NC server.

JaredBusch

@brandon220 said in Onlyoffice vs Collabora in Nextcloud:

@JaredBusch I’m sure you are right. I can access the document server via https through the proxy with the current config. Nextcloud can connect to it https. There is an error however in the browser (when you open the developer tools and view the console) and the document content never loads. I am trying so hard to avoid installing Docker, podman, etc on the NC server.

I honestly have no clue. It is simply speculation based on prior experience with shit behind a proxy.

brandon220

@JaredBusch Understood. Just frustrating when all the other hosts I have behind a proxy work perfect.

I’m just afraid it would work ok with the document server running on the NC server (as a container) but not be able to keep up with heavy use. I have learned to keep workloads separate.

brandon220

I’ll have to take my test vm and put the cert directly on it and test the functionality.

JaredBusch

@brandon220 said in Onlyoffice vs Collabora in Nextcloud:

I’ll have to take my test vm and put the cert directly on it and test the functionality.

You don't need a valid cert from a CA behind the proxy.

You just need a cert. That is why I said self signed. It is still encrypted. There is nothing wrong with the encryption of self signed certs.

For your Proxy to talk to the backend piece, you control it all so there is no trust issue with the public. The self signed cert will never be seen.

brandon220

@JaredBusch makes sense. I’ll give it a try tomorrow.