I have this problem with the Dlink DVX-8000 IPPBX
-
Win 7 am using
-
@sadiq said in I have this problem with the Dlink DVX-8000 IPPBX:
The laptop IP setting is same match for the 192.168.100.3
OK so open up a command prompt and attempt to ping the device at 192.168.100.100
If it doesn't respond either ICMP is disabled or it isn't using that address.
-
@sadiq said in I have this problem with the Dlink DVX-8000 IPPBX:
Any one suggest any IP scanner that can find any IP
AngryIP. It's free and works really well.
-
it is not pinging
-
@sadiq said in I have this problem with the Dlink DVX-8000 IPPBX:
it is not pinging
The device may not be working. These are not very reliable pieces of hardware.
-
@scottalanmiller Angry IP range i gave 192.168.100.1 192.168.100.255
No IP find
-
@sadiq said in I have this problem with the Dlink DVX-8000 IPPBX:
@scottalanmiller Angry IP range i gave 192.168.100.1 192.168.100.255
No IP find
You have both connected to the switch still, right? With cables that you know work otherwise?
-
Even I try to use Putty - ssl - to open the 192.168.100.100 - It is not going inside
-
Am trying the PBX directly with my laptop and trying with switch also
The same result -
@sadiq said in I have this problem with the Dlink DVX-8000 IPPBX:
Even I try to use Putty - ssl - to open the 192.168.100.100 - It is not going inside
If you can't ping it, PuTTY isn't going to work. No need to try that.
-
@sadiq open a command prompt and show us the result of running:
ipconfig /all -
@sadiq said in I have this problem with the Dlink DVX-8000 IPPBX:
Am trying the PBX directly with my laptop and trying with switch also
The same resultSounds like the unit is not working.
-
Is there a console port on the back? Might be easiest to connect to that and figure out what the IP address is.
I couldn't find anything about the DVX-8000, but here is a manual for a DVX-1000.
ftp://ftp2.dlink.com/PRODUCTS/DVX-1000/REVA/DVX-1000_MANUAL_1.01_EN.PDF
