FreePBX commercial module cleanup

scottalanmiller

I do the same thing.

JaredBusch

You can do all of this in the GUI also.

DustinB3403

@JaredBusch do you just disable every module and just go back in and install the ones used?

That seems like the most logical approach, just looking into how you operate.

JaredBusch

@DustinB3403 said in FreePBX commercial module cleanup:

@JaredBusch do you just disable every module and just go back in and install the ones used?

That seems like the most logical approach, just looking into how you operate.

I could, but no. I know before it is ever installed what the design is going to be. That is part of discovery.

bnrstnr

I'm getting the below result for every single module I try to uninstall but if I do fwconsole ma listonline again it's showing Not Installed (Locally available) for the module it just gave me the error for, is this normal?

[root@freepbx ~]# fwconsole ma uninstall calllimit
dropping table calllimit..done<br>
dropping table calllimit_usage..done<br>
The following error(s) occured:
 - Failed to run un-installation scripts

JaredBusch

@bnrstnr said in FreePBX commercial module cleanup:

I'm getting the below result for every single module I try to uninstall but if I do fwconsole ma listonline again it's showing Not Installed (Locally available) for the module it just gave me the error for, is this normal?
[root@freepbx ~]# fwconsole ma uninstall calllimit
dropping table calllimit..done<br>
dropping table calllimit_usage..done<br>
The following error(s) occured:
 - Failed to run un-installation scripts

Did you reload after disable?

bnrstnr

@JaredBusch Yes, I did.

JaredBusch

@bnrstnr said in FreePBX commercial module cleanup:

@JaredBusch Yes, I did.

I've seen the error before, but not everytime like you say.

I verify it is no installed as you did, and then delete it

bnrstnr

@JaredBusch said in FreePBX commercial module cleanup:

@bnrstnr said in FreePBX commercial module cleanup:

@JaredBusch Yes, I did.

I've seen the error before, but not everytime like you say.

I verify it is no installed as you did, and then delete it

Ok, it looks like it's working, I was just curious about the error. No problems deleting them. Thanks

JaredBusch

New FrePBX 14 system installed this morning.

Here is what I removed.

Don't use sudo if you are logged in as root.

sudo fwconsole ma disable areminder
sudo fwconsole ma disable broadcast
sudo fwconsole ma disable callaccounting
sudo fwconsole ma disable callerid
sudo fwconsole ma disable calllimit
sudo fwconsole ma disable conferencespro
sudo fwconsole ma disable extensionroutes
sudo fwconsole ma disable faxpro
sudo fwconsole ma disable freepbx_ha
sudo fwconsole ma disable pagingpro
sudo fwconsole ma disable parkpro
sudo fwconsole ma disable pinsetspro
sudo fwconsole ma disable pms
sudo fwconsole ma disable queuestats
sudo fwconsole ma disable qxact_reports
sudo fwconsole ma disable recording_report
sudo fwconsole ma disable sangomacrm
sudo fwconsole ma disable sipstation
sudo fwconsole ma disable vega
sudo fwconsole ma disable vmnotify
sudo fwconsole ma disable voicemail_report
sudo fwconsole ma disable vqplus
sudo fwconsole ma disable webcallback

sudo fwconsole ma uninstall areminder
sudo fwconsole ma uninstall broadcast
sudo fwconsole ma uninstall callaccounting
sudo fwconsole ma uninstall callerid
sudo fwconsole ma uninstall calllimit
sudo fwconsole ma uninstall conferencespro
sudo fwconsole ma uninstall extensionroutes
sudo fwconsole ma uninstall faxpro
sudo fwconsole ma uninstall freepbx_ha
sudo fwconsole ma uninstall pagingpro
sudo fwconsole ma uninstall parkpro
sudo fwconsole ma uninstall pinsetspro
sudo fwconsole ma uninstall pms
sudo fwconsole ma uninstall queuestats
sudo fwconsole ma uninstall qxact_reports
sudo fwconsole ma uninstall recording_report
sudo fwconsole ma uninstall sangomacrm
sudo fwconsole ma uninstall sipstation
sudo fwconsole ma uninstall vega
sudo fwconsole ma uninstall vmnotify
sudo fwconsole ma uninstall voicemail_report
sudo fwconsole ma uninstall vqplus
sudo fwconsole ma uninstall webcallback

sudo fwconsole ma delete areminder
sudo fwconsole ma delete broadcast
sudo fwconsole ma delete callaccounting
sudo fwconsole ma delete callerid
sudo fwconsole ma delete calllimit
sudo fwconsole ma delete conferencespro
sudo fwconsole ma delete extensionroutes
sudo fwconsole ma delete faxpro
sudo fwconsole ma delete freepbx_ha
sudo fwconsole ma delete pagingpro
sudo fwconsole ma delete parkpro
sudo fwconsole ma delete pinsetspro
sudo fwconsole ma delete pms
sudo fwconsole ma delete queuestats
sudo fwconsole ma delete qxact_reports
sudo fwconsole ma delete recording_report
sudo fwconsole ma delete sangomacrm
sudo fwconsole ma delete sipstation
sudo fwconsole ma delete vega
sudo fwconsole ma delete vmnotify
sudo fwconsole ma delete voicemail_report
sudo fwconsole ma delete vqplus
sudo fwconsole ma delete webcallback

followed by

sudo fwconsole reload

scottalanmiller

@JaredBusch that's a handy list, thanks.

JaredBusch

@scottalanmiller said in FreePBX commercial module cleanup:

@JaredBusch that's a handy list, thanks.

Well the instruction on how to do it was in the first post.

As this can change overtime, that is important.

Also , I choose to leave things like EPM and Zulu even if not currently being used.

niakoue

@JaredBusch doing it with a script:

for i in fwconsole ma listonline | grep Commercial | awk '{print $2}'

do
fwconsole ma disable $i
done

fwconsole reload

for i in fwconsole ma listonline | grep Commercial | awk '{print $2}'

do
fwconsole ma uninstall $i
fwconsole ma delete $i
done

fwconsole reload

black3dynamite

@niakoue said in FreePBX commercial module cleanup:

@JaredBusch doing it with a script:

for i in fwconsole ma listonline | grep Commercial | awk '{print $2}'

do
fwconsole ma disable $i
done

fwconsole reload

for i in fwconsole ma listonline | grep Commercial | awk '{print $2}'

do
fwconsole ma uninstall $i
fwconsole ma delete $i
done

fwconsole reload

There's already thread about creating an initial FreePBX Setup
https://www.republicofit.com/topic/21570/starting-to-work-on-an-initial-freepbx-setup-script/

And the scripts is located at https://github.com/sorvani/freepbx-helper-scripts/tree/master/InitialSetup if you want to open a pull request.

JaredBusch

The problem with doing a fwconsole ma listonline on a new install is that it will immediately attempt to then install some commercial modules that have severe security updates.

And those also have dependencies that get updated.

I have not had a chance to come back around to find the best solution for an initial loop.

Also, more experiments proved out that you can simply do the delete.