Configuring QoS on a Edge Switch 48 Lite
-
Are you able to prove that your switches are in fact saturated? Not that I don't believe you but enabling QoS doesn't really address the situation.
Configuring traffic shaping with DSCP tagging (46) might be a better option.
-
And QoS won't do anything for you once the call hits the open internet.
-
@dustinb3403 No yet, haven't had access to the switches yet. They do report internal call issues, so thinking maybe setting QoS on the switches might also help.
-
@romo said in Configuring QoS on a Edge Switch 48 Lite:
@dustinb3403 No yet, haven't had access to the switches yet. They do report internal call issues, so thinking maybe setting QoS on the switches might also help.
I would suggest using Cacti or Zabbix or something to monitor the switches... Especially on the Uplink ports.
-
QoS can't help though, as it's simply adding more to the network payload that the switch would have to process.
QoS issues on the LAN are something else entirely, like a poorly designed network, I'd really look at the switches and see if 1) they are in fact saturated 2) that DSCP tagging can't be enabled
-
I guess a better thing to do would be to show us a network topology so we can see what's going on. Hell I need to do the same thing! My head hurts when we talk QoS.
-
Worth mentioning, but these switches have 70 Gbps throughput (which ain't shabby).
-
@dustinb3403 said in Configuring QoS on a Edge Switch 48 Lite:
QoS can't help though, as it's simply adding more to the network payload that the switch would have to process.
QoS issues on the LAN are something else entirely, like a poorly designed network, I'd really look at the switches and see if 1) they are in fact saturated 2) that DSCP tagging can't be enabled
That is totally not how anything works.
Of course QoS can help. That is the entire point of QoS.
-
@jaredbusch would you agree that having QoS enabled on everything on the switch is not helpful?
-
@dustinb3403 said in Configuring QoS on a Edge Switch 48 Lite:
Worth mentioning, but these switches have 70 Gbps throughput (which ain't shabby).
Each port is still only 1Gbps. That is where the QoS is important.
-
@dustinb3403 said in Configuring QoS on a Edge Switch 48 Lite:
@jaredbusch would you agree that having QoS enabled on everything on the switch is not helpful?
No I do not agree with you. Having QoS enabled is 100% helpful. That is the entire point of the solution.
-
@jaredbusch I would only have QoS enabled for specific type of traffic (with DSCP tagging) using blanket QoS has never been helpful in my experience as everything than gets "top priority".
Disagree with me if you want, but tagging specific types of traffic offers better QoS than using blanket functionality.
-
@dustinb3403 said in Configuring QoS on a Edge Switch 48 Lite:
@jaredbusch I would only have QoS enabled for specific type of traffic (with DSCP tagging) using blanket QoS has never been helpful in my experience as everything than gets "top priority".
There is no such thing as "blanket QoS". QoS is always something configured. With a GUI wizard, or by hand, but still configured. No wizard I have ever used give all traffic the same priority as that would defeat the purpose of it.
You are arguing in a cirlce with bad information.
-
@romo said in Configuring QoS on a Edge Switch 48 Lite:
Has anybody set QoS on the switches? Trying to prioritize VOIP on reported saturated switches. I can see from here https://dl.ubnt.com/guides/edgemax/EdgeSwitch_AdminGuide.pdf#ConfQoS.indd%3AAnchor 1%3A285 the edgeswitches do offersome options but not clear on what works better as I have not done QoS on switches before.
It is all configured in the "Legacy" interface of the Switch. I've never used any of this yet.
-
-
-
-
Looking at this all, I would use
Class of Service->IP DSCPto set the various priories.
Then on the interface tab, change each port form the default trust VLAN to trust IP-DSCP
-
On the otherhand, if you have a voice only VLAN, leave that all alone and specify the Voice VLAN in the Auto VoIP settings.
-
Don't have any vlan set on the the switches, so probably best bet would be
Class of Service->IP DSCPthen right?
