Quickest way to set up Zabbix to monitor managed switch metrics??
-
@dave247 said in Quickest way to set up Zabbix to monitor managed switch metrics??:
@dbeato said in Quickest way to set up Zabbix to monitor managed switch metrics??:
@dave247 said in Quickest way to set up Zabbix to monitor managed switch metrics??:
Before I get into the thick of it... and since I don't 100% know what I'm doing... These are the templates I've added for my single test switch:
I seem to be getting a lot of data coming in now for my N3048P switch. I am going to go ahead and set the rest of my 7 switches up with the same templates.. or should I only be using one? I don't want to bog stuff down by sending too much info, if that's even a concern in this case..You can use multiple templates, it will just get the data from each template.
So do you think that's good enough to get as much useful data as possible? I am interested in monitoring the port-channel trunk links between switches in an attempt to identify any possible congestion issues, etc.
You likely can monitor what you want with something like Template SNMP Generic.
-
@dafyre said in Quickest way to set up Zabbix to monitor managed switch metrics??:
@dave247 said in Quickest way to set up Zabbix to monitor managed switch metrics??:
@dbeato said in Quickest way to set up Zabbix to monitor managed switch metrics??:
@dave247 said in Quickest way to set up Zabbix to monitor managed switch metrics??:
Before I get into the thick of it... and since I don't 100% know what I'm doing... These are the templates I've added for my single test switch:
I seem to be getting a lot of data coming in now for my N3048P switch. I am going to go ahead and set the rest of my 7 switches up with the same templates.. or should I only be using one? I don't want to bog stuff down by sending too much info, if that's even a concern in this case..You can use multiple templates, it will just get the data from each template.
So do you think that's good enough to get as much useful data as possible? I am interested in monitoring the port-channel trunk links between switches in an attempt to identify any possible congestion issues, etc.
You likely can monitor what you want with something like Template SNMP Generic.
Are you talking about "Template Module Generic SNMPv2" ? And is that going to get my all network traffic, switch resource info (cpu, power, etc) as well as everything else?
-
Well after adding the rest of my switches, Zabbix decided to take a crap... the configuration cache was topping out. I increased the Cachesize from 8 to 16 but things seem to have stopped working anyway... after another day of futile struggling, I decided to just shut down the system and give LibreNMS a try.
-
@dave247 said in Quickest way to set up Zabbix to monitor managed switch metrics??:
Well after adding the rest of my switches, Zabbix decided to take a crap... the configuration cache was topping out. I increased the Cachesize from 8 to 16 but things seem to have stopped working anyway... after another day of futile struggling, I decided to just shut down the system and give LibreNMS a try.
That's bizarre... I've got almost 100 servers half a dozen hosts and dozens of switches reporting to our zabbix server.
-
@coliver said in Quickest way to set up Zabbix to monitor managed switch metrics??:
@dave247 said in Quickest way to set up Zabbix to monitor managed switch metrics??:
Well after adding the rest of my switches, Zabbix decided to take a crap... the configuration cache was topping out. I increased the Cachesize from 8 to 16 but things seem to have stopped working anyway... after another day of futile struggling, I decided to just shut down the system and give LibreNMS a try.
That's bizarre... I've got almost 100 servers half a dozen hosts and dozens of switches reporting to our zabbix server.
I know.. At first I figured it was because I was using the 4 different templates and after I added all 8 switches, it was being over-loaded. But then I realized that it's probably normal to have hundreds of systems sending data to Zabbix, so that shouldn't be the issue.. well it's par for the course for me.
I just got LibreNMS up and running and it's working like a charm. Got all my switches added and I'm watching beautiful graphs going before my eyes. It just seems to work. Zabbix was a mess...
-
@dave247 said in Quickest way to set up Zabbix to monitor managed switch metrics??:
@coliver said in Quickest way to set up Zabbix to monitor managed switch metrics??:
@dave247 said in Quickest way to set up Zabbix to monitor managed switch metrics??:
Well after adding the rest of my switches, Zabbix decided to take a crap... the configuration cache was topping out. I increased the Cachesize from 8 to 16 but things seem to have stopped working anyway... after another day of futile struggling, I decided to just shut down the system and give LibreNMS a try.
That's bizarre... I've got almost 100 servers half a dozen hosts and dozens of switches reporting to our zabbix server.
I know.. At first I figured it was because I was using the 4 different templates and after I added all 8 switches, it was being over-loaded. But then I realized that it's probably normal to have hundreds of systems sending data to Zabbix, so that shouldn't be the issue.. well it's par for the course for me.
I just got LibreNMS up and running and it's working like a charm. Got all my switches added and I'm watching beautiful graphs going before my eyes. It just seems to work. Zabbix was a mess...
Glad you got something to work!
