Building a Hyper-V 2016 host Take 2
-
Something to add here, as I just had to re-do a Hyper-V host... Pagefile.sys
I installed Hyper-V Server 2016, and it decided to put the pagefile on the MD1000. I wanted it on the
drive. It took me a while to figure out how to do it via PowerShell, but I got it. Here's the PowerShell I used to fix it:Set-WMIInstance -Class Win32_PageFileSetting -Arguments @{name="C:\pagefile.sys";InitialSize = 4096; MaximumSize = 12288}Run that line and reboot.
I chose my page file size as such because the drive is small, and I don't care about page file. But MS recommends to use use as automatically managed, so there we go... a mid-way compromise.You can check the status by running this:
Get-WmiObject Win32_PageFileusage -
I've successfully added Windows Server Management to my Windows 10 system and am now able to connect to my Hyper-V 2016 server. However, I am having trouble viewing server info such as hard disk space. I get this error when trying to go to disk management:
I've been googling for a while now trying to fix it. No dice.
Also, NICE WRITE-UP!!
-
-
@dave247 said in Building a Hyper-V 2016 host Take 2:
I've successfully added Windows Server Management to my Windows 10 system and am now able to connect to my Hyper-V 2016 server. However, I am having trouble viewing server info such as hard disk space. I get this error when trying to go to disk management:
did you run this command as noted above
Enable-NetFirewallRule -DisplayGroup āRemote Volume Managementā -
@dashrender said in Building a Hyper-V 2016 host Take 2:
@dave247 said in Building a Hyper-V 2016 host Take 2:
I've successfully added Windows Server Management to my Windows 10 system and am now able to connect to my Hyper-V 2016 server. However, I am having trouble viewing server info such as hard disk space. I get this error when trying to go to disk management:
did you run this command as noted above
Enable-NetFirewallRule -DisplayGroup āRemote Volume ManagementāYes, I ran that on the server but not my pc. I just ran it on my Windows 10 pc too and now it works.
THANKS
-
@dave247 said in Building a Hyper-V 2016 host Take 2:
@dashrender said in Building a Hyper-V 2016 host Take 2:
@dave247 said in Building a Hyper-V 2016 host Take 2:
I've successfully added Windows Server Management to my Windows 10 system and am now able to connect to my Hyper-V 2016 server. However, I am having trouble viewing server info such as hard disk space. I get this error when trying to go to disk management:
did you run this command as noted above
Enable-NetFirewallRule -DisplayGroup āRemote Volume ManagementāYes, I ran that on the server but not my pc. I just ran it on my Windows 10 pc too and now it works.
THANKS
Yeah has to be done on both sides. A gotcha for sure, that as you found out is not easily Google-able.
-
@brrabill said in Building a Hyper-V 2016 host Take 2:
@dave247 said in Building a Hyper-V 2016 host Take 2:
@dashrender said in Building a Hyper-V 2016 host Take 2:
@dave247 said in Building a Hyper-V 2016 host Take 2:
I've successfully added Windows Server Management to my Windows 10 system and am now able to connect to my Hyper-V 2016 server. However, I am having trouble viewing server info such as hard disk space. I get this error when trying to go to disk management:
did you run this command as noted above
Enable-NetFirewallRule -DisplayGroup āRemote Volume ManagementāYes, I ran that on the server but not my pc. I just ran it on my Windows 10 pc too and now it works.
THANKS
Yeah has to be done on both sides. A gotcha for sure, that as you found out is not easily Google-able.
Today I learned...
-
@dave247 said in Building a Hyper-V 2016 host Take 2:
@dashrender said in Building a Hyper-V 2016 host Take 2:
@dave247 said in Building a Hyper-V 2016 host Take 2:
I've successfully added Windows Server Management to my Windows 10 system and am now able to connect to my Hyper-V 2016 server. However, I am having trouble viewing server info such as hard disk space. I get this error when trying to go to disk management:
did you run this command as noted above
Enable-NetFirewallRule -DisplayGroup āRemote Volume ManagementāYes, I ran that on the server but not my pc. I just ran it on my Windows 10 pc too and now it works.
THANKS
Do I need to change something in my instructions to make that specifically stand out more?
-
@dashrender said
Do I need to change something in my instructions to make that specifically stand out more?
I would think ... yes?
-
@dashrender said in Building a Hyper-V 2016 host Take 2:
@dave247 said in Building a Hyper-V 2016 host Take 2:
@dashrender said in Building a Hyper-V 2016 host Take 2:
@dave247 said in Building a Hyper-V 2016 host Take 2:
I've successfully added Windows Server Management to my Windows 10 system and am now able to connect to my Hyper-V 2016 server. However, I am having trouble viewing server info such as hard disk space. I get this error when trying to go to disk management:
did you run this command as noted above
Enable-NetFirewallRule -DisplayGroup āRemote Volume ManagementāYes, I ran that on the server but not my pc. I just ran it on my Windows 10 pc too and now it works.
THANKS
Do I need to change something in my instructions to make that specifically stand out more?
Maybe, "Run these commands on both server and management workstation"
-
@dave247 said in Building a Hyper-V 2016 host Take 2:
@dashrender said in Building a Hyper-V 2016 host Take 2:
@dave247 said in Building a Hyper-V 2016 host Take 2:
@dashrender said in Building a Hyper-V 2016 host Take 2:
@dave247 said in Building a Hyper-V 2016 host Take 2:
I've successfully added Windows Server Management to my Windows 10 system and am now able to connect to my Hyper-V 2016 server. However, I am having trouble viewing server info such as hard disk space. I get this error when trying to go to disk management:
did you run this command as noted above
Enable-NetFirewallRule -DisplayGroup āRemote Volume ManagementāYes, I ran that on the server but not my pc. I just ran it on my Windows 10 pc too and now it works.
THANKS
Do I need to change something in my instructions to make that specifically stand out more?
Maybe, "Run these commands on both server and management workstation"
He does say that. I just think it needs to be highlighted or something because in that block it's easy to miss.
"Remote access needs to be enabled on the machine you're remoting from as well as the one you're remoting too"
-
https://i.imgur.com/DqGo6tP.png
Updated.
-
Just wanted to throw in here that the updates window can lose focus, so if it's been a while ... you might need to hit a key in it.
@JaredBusch said this has been around forever, but this is the only time I have seen it personally, and it just got me again today!
-
Wow thats more difficult than setting up Linux KVM..
To the point that why would you want to do this. -
@emad-r said in Building a Hyper-V 2016 host Take 2:
Wow thats more difficult than setting up Linux KVM..
To the point that why would you want to do this.If you are an All Windows Shop, why would you want to have another technology tossed in?
I'm not saying you're wrong, there are just places that prefer to stick to one vendor/tech tree.
-
@dashrender said in Building a Hyper-V 2016 host Take 2:
@emad-r said in Building a Hyper-V 2016 host Take 2:
Wow thats more difficult than setting up Linux KVM..
To the point that why would you want to do this.If you are an All Windows Shop, why would you want to have another technology tossed in?
I'm not saying you're wrong, there are just places that prefer to stick to one vendor/tech tree.
Yeah it's pretty simple if you're already using a MS AD domain and have GP set up to pretty much make it all plug-n-play, then you don't have to worry about any of this stuff.
-
It looks a lot harder than it really is.
-
@brrabill said in Building a Hyper-V 2016 host Take 2:
It looks a lot harder than it really is.
Agreed - this is a pretty shitty setup. ESXi is super damned easy compared to this convoluted BS!
-
With my little XS adventure earlier this week, it reminded me how truly simple XS/XC/XO is.
Hyper-V really does need such a thing. Such a free thing.
-
@brrabill said in Building a Hyper-V 2016 host Take 2:
With my little XS adventure earlier this week, it reminded me how truly simple XS/XC/XO is.
Hyper-V really does need such a thing. Such a free thing.
I'm thinking once SSH is fully built into Windows, it will be much easier.
As of now, I'm able to use PowerShell Core to do
Enter-PSSessionfrom Linux TO Windows. Which helps when I'm writing PowerShell scripts in VSCode on Linux, and need to do real tests on a Windows machine... being able to do that is huge time saver.I don't think it's far off until it's part of all Windows and Hyper-V as well.
