Korora 25: MacBookPro install: tips | tricks | info
-
@FATeknollogee said in Korora 25: MacBookPro install: tips | tricks | info:
Well, I tried Fed 26 & the power management when closing lid just doesn't work.
Neither Hibernate nor Suspend work like they should.
Right now, I'm kinda stuck!
Mine seems to go right into sleep mode no problem.
-
@JaredBusch said in Korora 25: MacBookPro install: tips | tricks | info:
Mine seems to go right into sleep mode no problem.
Does it wake up no problem?
-
@FATeknollogee said in Korora 25: MacBookPro install: tips | tricks | info:
@JaredBusch said in Korora 25: MacBookPro install: tips | tricks | info:
Mine seems to go right into sleep mode no problem.
Does it wake up no problem?
I close the lid, the light on the front starts glowing off and on slowly like it always did for sleep mode.
I open the lid back up after a few moments and the screen lights back up and asks for my password.
How long you want me to leave it in standby?
-
@JaredBusch That is fine. Thanks for the detail.
-
@FATeknollogee my power settings for reference.
-
@JaredBusch Those are the same power settings I have.
I tried both suspend & hibernate, both were a no-go. -
After chatting with the folks at Korora they suggest I file a bug at bugzilla.redhat.com
-
@FATeknollogee said in Korora 25: MacBookPro install: tips | tricks | info:
@JaredBusch Those are the same power settings I have.
I tried both suspend & hibernate, both were a no-go.Your hardware is 5 years newer than mine, so hard to say.
-
Okay, I signed in and then closed the lid.
- Light was showing standby.
- I left it for about 45 minutes.
- opened lid.
- Keyboard lights came on but the screen did not come back up.
- Pressing keys does nothing.
- Pressing power button does nothing.
- hard power cycle required to power on.
So, seems to be the same issue.
-
-
@JaredBusch said in Korora 25: MacBookPro install: tips | tricks | info:
Okay, I signed in and then closed the lid.
- Light was showing standby.
- I left it for about 45 minutes.
- opened lid.
- Keyboard lights came on but the screen did not come back up.
- Pressing keys does nothing.
- Pressing power button does nothing.
- hard power cycle required to power on.
So, seems to be the same issue.
Does it happen when using Korora 25 Gnome?
-
@Tim_G said in Korora 25: MacBookPro install: tips | tricks | info:
@JaredBusch said in Korora 25: MacBookPro install: tips | tricks | info:
Okay, I signed in and then closed the lid.
- Light was showing standby.
- I left it for about 45 minutes.
- opened lid.
- Keyboard lights came on but the screen did not come back up.
- Pressing keys does nothing.
- Pressing power button does nothing.
- hard power cycle required to power on.
So, seems to be the same issue.
Does it happen when using Korora 25 Gnome?
I have not installed anything else.
