HTS's Lab in Progress
-
Check the FreePBX status screen or the Elastix status screen and make sure the trunk really is connected.
-
@NetworkNerd said:
@Hubtech said:
OK, elastix is setup. pretty painless.
Internal extension calling is setup and working, pretty painless.
dialing in from out and out from in....not working. i've got a trunk setup and in/out routes setup and assigned to extension...bah any advice?
When you say not working, can you be more specific? Is it 30 seconds and then the call dies, "all circuits are busy now," or something else entirely?
all circuits are busy now. in a very smooth voice
-
looks like it could be internet connectivity issue. though from the cli i can ping out via IP and domain name.
-
-
Likely trunks aren't working in both directions. Do you have a NAT firewall?
-
elastix is in dmz
-
OK, so i've now got connectivity but trunks still aren't connected correctly.
-
@Hubtech Who are you registering your trunks with and what settings are you using in your outgoing side? I might be able to provide some insight on that. I've been dealing with Elastix trunk settings very recently to the point where my head hurts lol
-
canreinvite=nonat
context=from-trunk
host=atlanta2.voip.ms
secret=*****
type=peer
username=***** -
@hubtech are you prepending the 1? You can do it either in the Trunk or the outbound route.
