how do you reboot your linux VMs in hyper-v?
-
@matteo-nunziati curious...
-
So if you did issue a reboot from the management interface, the VM just shuts down. Rather than actually rebooting.
Seems like a huge failure there if that's true. What hardware is hyper-v installed on?
-
@DustinB3403 said in how do you reboot your linux VMs in hyper-v?:
Or why aren't you able to reboot via the Hyper-V management interface?
what's this? I just have the "shutdown" button on the hyper-v GUI (win 10).
also if I enter a remote session in powershell and issue:Restart-VM -Name VM-NAME-HEREthe machine shuts down it doesn't restart!
-
@DustinB3403 said in how do you reboot your linux VMs in hyper-v?:
So if you did issue a reboot from the management interface, the VM just shuts down. Rather than actually rebooting.
Seems like a huge failure there if that's true. What hardware is hyper-v installed on?
HPE DL380G9
I suppose something is broken in my setup: it is not possible people did notice this basic item!
-
@matteo-nunziati said in how do you reboot your linux VMs in hyper-v?:
HPE DL380G9
According to the HPE HCL the hardware is fully supported...
Is anyone else experiencing the same results?
-
@DustinB3403 said in how do you reboot your linux VMs in hyper-v?:
@matteo-nunziati said in how do you reboot your linux VMs in hyper-v?:
HPE DL380G9
According to the HPE HCL the hardware is fully supported...
Is anyone else experiencing the same results?
found anything on the web, going to call HPE support... but I'm a bit in a hurry. hoped for a fast solution on-line
-
I've not heard of anyone having this issue. You might have something unique here.
-
@scottalanmiller said in how do you reboot your linux VMs in hyper-v?:
I've not heard of anyone having this issue. You might have something unique here.
yes. until it was ubuntu I was thinking about something strange in the vUEFI. but even win over win...
-
@scottalanmiller said in how do you reboot your linux VMs in hyper-v?:
I've not heard of anyone having this issue. You might have something unique here.
NOT what you want in IT. I'll be waiting to see what the problem is.
-
@matteo-nunziati said in how do you reboot your linux VMs in hyper-v?:
@scottalanmiller said in how do you reboot your linux VMs in hyper-v?:
I've not heard of anyone having this issue. You might have something unique here.
yes. until it was ubuntu I was thinking about something strange in the vUEFI. but even win over win...
If the VM does not start at all, then what is in the container won't be the issue.
-
mmm... got this:
Restart-VM -Name zi-erp-as Confirm Are you sure you want to restart virtual machine "zi-erp-as"? [Y] Yes [A] Yes to All [H] Halt Command [?] Guida (il valore predefinito è "Y"): Restart-VM : 'zi-erp-as' failed to change state. + CategoryInfo : NotSpecified: (:) [Restart-VM], VirtualizationException + FullyQualifiedErrorId : OperationFailed,Microsoft.HyperV.PowerShell.Commands.RestartVMAnd the machine just stops.
Now performed a sequence of start-restart with no idle, just waiting in VM Manager to see the CPU go down and then fire the restart. So far so good... really weird. Let's the VM stay idle for a while and retry!
Yep! if the machine stays idle for a few tens of seconds everything go nuts:
Restart-VM -Name zi-erp-as Confirm Are you sure you want to restart virtual machine "zi-erp-as"? [Y] Yes [A] Yes to All [N] No [L] No to All [?] Guida (il valore predefinito è "Y"): Restart-VM : 'zi-erp-as' failed to change state. + CategoryInfo : NotSpecified: (:) [Restart-VM], VirtualizationException + FullyQualifiedErrorId : OperationFailed,Microsoft.HyperV.PowerShell.Commands.RestartVMNot this specific error but when people get this "change state" suggestions are to rebuild the machine
but those are all brand new.Apparently this is not the case with:
Stop-VM -Name zi-erp-as; Start-VM -Name zi-erp-asBut this is a no go for remote administration from within the VM. Need to sort this out
-
even tested a gen1 VM: not different.
-
ok, just got that Restart-VM does an hard restart (removes the plug). just forget it!
still missing an answer... -
So just the fact that you are running it as a VM makes all the difference?
If you run it on hardware, can you reboot normally?
Is it just with Hyper-V? Have you tried it on other hypervisors?
What happens if you install the latest actual LIS drivers from Microsoft?:
https://www.microsoft.com/en-us/download/details.aspx?id=51612 -
I never have any problems. I just did this.
Hyper-V Server 2012 R2 with a CentOS 7 guest in a Gen 2 VM.
Windows PowerShell Copyright (C) 2014 Microsoft Corporation. All rights reserved. PS C:\Users\user> Restart-VM -Name Zabbix Confirm Are you sure you want to restart virtual machine "Zabbix"? [Y] Yes [A] Yes to All [N] No [L] No to All [S] Suspend [?] Help (default is "Y"): y
-
Try following these instructions:
https://technet.microsoft.com/en-us/windows-server-docs/compute/hyper-v/supported-ubuntu-virtual-machines-on-hyper-v -
@Tim_G said in how do you reboot your linux VMs in hyper-v?:
So just the fact that you are running it as a VM makes all the difference?
If you run it on hardware, can you reboot normally?
you mean linux or windows? well yes never got issues on HW. but don't know on THIS HW!
Is it just with Hyper-V? Have you tried it on other hypervisors?
same linux machines on kvm run perfectly and autoreboot at every update
What happens if you install the latest actual LIS drivers from Microsoft?:
https://www.microsoft.com/en-us/download/details.aspx?id=51612ubuntu has them built in. windows vms don't need...
I was thinking about reboot my win10 machine with hyperv and test there...
-
Do you have the Linux Hyperv Agent updated?
https://technet.microsoft.com/en-us/windows-server-docs/compute/hyper-v/supported-ubuntu-virtual-machines-on-hyper-v -
@black3dynamite @Eltolargo @Tim_G latest kernel and tools are installed from the HWE stack. this doesn't help. just tried again from a VPN to my office. Also hell win2012r2 doesn't reboot in hyper-v 2016.
monday I'll reboot the server from within the server room, with a monitor attached. let see if something strange happens even at hw level... -
This post is deleted!
