Solved Fedora Block Device Full How - Extend Partition
-
Dumb question, would it be easier for me to simply add a separate drive, and then extend the root drive into the new drive?
-
@DustinB3403 said in Fedora Block Device Full How - Extend Partition:
Dumb question, would it be easier for me to simply add a separate drive, and then extend the root drive into the new drive?
Maybe.
You can skip the fdisk stuff and add a whole new block device to LVM if you add another virtual disk. -
@Francesco-Provino I'm fine with a separate physical device, so long as the system uses it as a single device.
-
@DustinB3403 said in Fedora Block Device Full How - Extend Partition:
@Francesco-Provino I'm fine with a separate physical device, so long as the system uses it as a single device.
You can actually move everything to the new drive using lvm. Tho I don't remember how to do that offhand, I'd have to look it up.
-
OK so this is what I have with a new "physical" drive attached to this VM.
Where too from here?
-
@DustinB3403 said in Fedora Block Device Full How - Extend Partition:
OK so this is what I have with a new "physical" drive attached to this VM.
Where too from here?
I'm actually doing this now myself, give me a sec.
-
@DustinB3403 pvcreate /dev/xvdb and proceed with vgextend…
-
@Francesco-Provino reading the manual for pvextend
-
@DustinB3403 said in Fedora Block Device Full How - Extend Partition:
@Francesco-Provino reading the manual for pvextend
You don't want to extend a pv tho, you want to create a new one. Add the new pv into the current vg (volume group), and then extend the lv (logical volume) to fill the new pv.
pvcreate /dev/xvdb vgextend fedora /dev/xvdb lvextend -l 100%FREE /dev/fedora/rootSee if that lvextend works, might need to feed it another vg/pv path.
-
-
Thanks guys, I think I've got it.
-
@DustinB3403 Now you need to figure out why your root partition got filled up in the first place!
-
@travisdh1 This was because the person who setup this system configured everything on a tiny partition.
I'm fine with the original size, as all this system does is push our image out. Until now that is, when I need to add a new image to push.
The entire drive is holding 2 windows images.
-
@DustinB3403 said in Fedora Block Device Full How - Extend Partition:
@travisdh1 This was because the person who setup this system configured everything on a tiny partition.
I'm fine with the original size, as all this system does is push our image out. Until now that is, when I need to add a new image to push.
The entire drive is holding 2 windows images.
Ah, the images should've never been included on / (root) in the first place.
-
-
@travisdh1 said in Fedora Block Device Full How - Extend Partition:
@DustinB3403 said in Fedora Block Device Full How - Extend Partition:
@travisdh1 This was because the person who setup this system configured everything on a tiny partition.
I'm fine with the original size, as all this system does is push our image out. Until now that is, when I need to add a new image to push.
The entire drive is holding 2 windows images.
Ah, the images should've never been included on / (root) in the first place.
Exactly. But they are, so without building a new imaging system, I'd rather (and believe I have since fog sees it correctly) is to just add space for the purposes here.
-
@DustinB3403 said in Fedora Block Device Full How - Extend Partition:
@travisdh1 said in Fedora Block Device Full How - Extend Partition:
@DustinB3403 said in Fedora Block Device Full How - Extend Partition:
@travisdh1 This was because the person who setup this system configured everything on a tiny partition.
I'm fine with the original size, as all this system does is push our image out. Until now that is, when I need to add a new image to push.
The entire drive is holding 2 windows images.
Ah, the images should've never been included on / (root) in the first place.
Exactly. But they are, so without building a new imaging system, I'd rather (and believe I have since fog sees it correctly) is to just add space for the purposes here.
Sorry, I was away for a while. You could always add the drive to the mount point where the images are stored. I had a Gitlab server that ran out of space, so I just copied the gitlab data from /var/opt and set the second drive to mount there.
-
@stacksofplates said in Fedora Block Device Full How - Extend Partition:
@DustinB3403 said in Fedora Block Device Full How - Extend Partition:
@travisdh1 said in Fedora Block Device Full How - Extend Partition:
@DustinB3403 said in Fedora Block Device Full How - Extend Partition:
@travisdh1 This was because the person who setup this system configured everything on a tiny partition.
I'm fine with the original size, as all this system does is push our image out. Until now that is, when I need to add a new image to push.
The entire drive is holding 2 windows images.
Ah, the images should've never been included on / (root) in the first place.
Exactly. But they are, so without building a new imaging system, I'd rather (and believe I have since fog sees it correctly) is to just add space for the purposes here.
Sorry, I was away for a while. You could always add the drive to the mount point where the images are stored. I had a Gitlab server that ran out of space, so I just copied the gitlab data from /var/opt and set the second drive to mount there.
Isn't that one of the cool advantages to linux is mount points.?
-
@Dashrender said in Fedora Block Device Full How - Extend Partition:
@stacksofplates said in Fedora Block Device Full How - Extend Partition:
@DustinB3403 said in Fedora Block Device Full How - Extend Partition:
@travisdh1 said in Fedora Block Device Full How - Extend Partition:
@DustinB3403 said in Fedora Block Device Full How - Extend Partition:
@travisdh1 This was because the person who setup this system configured everything on a tiny partition.
I'm fine with the original size, as all this system does is push our image out. Until now that is, when I need to add a new image to push.
The entire drive is holding 2 windows images.
Ah, the images should've never been included on / (root) in the first place.
Exactly. But they are, so without building a new imaging system, I'd rather (and believe I have since fog sees it correctly) is to just add space for the purposes here.
Sorry, I was away for a while. You could always add the drive to the mount point where the images are stored. I had a Gitlab server that ran out of space, so I just copied the gitlab data from /var/opt and set the second drive to mount there.
Isn't that one of the cool advantages to linux is mount points.?
Ya, it's really flexible and makes things a lot easier.
-
@Dashrender said in Fedora Block Device Full How - Extend Partition:
@stacksofplates said in Fedora Block Device Full How - Extend Partition:
@DustinB3403 said in Fedora Block Device Full How - Extend Partition:
@travisdh1 said in Fedora Block Device Full How - Extend Partition:
@DustinB3403 said in Fedora Block Device Full How - Extend Partition:
@travisdh1 This was because the person who setup this system configured everything on a tiny partition.
I'm fine with the original size, as all this system does is push our image out. Until now that is, when I need to add a new image to push.
The entire drive is holding 2 windows images.
Ah, the images should've never been included on / (root) in the first place.
Exactly. But they are, so without building a new imaging system, I'd rather (and believe I have since fog sees it correctly) is to just add space for the purposes here.
Sorry, I was away for a while. You could always add the drive to the mount point where the images are stored. I had a Gitlab server that ran out of space, so I just copied the gitlab data from /var/opt and set the second drive to mount there.
Isn't that one of the cool advantages to linux is mount points.?
It used to be, yes. You can do the same sort of thing in Windows now as well, but it's not something consumers are really aware of.
