What Are You Doing Right Now
-
@JaredBusch said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
Lots of school activities going on here, school starts this week in Houston.
Started today for my girls.
Soft start today, meet the teacher stuff. I think real classes start on Wednesday.
-
@Dashrender said in What Are You Doing Right Now:
fighting with PC issues.
Dead receiver on Logitech keyboard/mouse set
laptop with virus
someone borrowed the projector and didn't plug it back in correctlyetc etc etc
Just thought about my old notebook. Sounds like a bad story: A thief took it in the middle of the night out of my office. Poor guy ... he injured himself pretty bad, there was blood all over the carpet because he just broke the window and didn't pay much attention. I still have the VGA connector and the power supply. He just forgot to take the power supply and didn't disconnect the monitor before running away.
Got a call from the police a few weeks later: They found him, he took it because he was trying to get money for his next kick. -
FINALLY got our Exchange server to send emails again... New ISP blocks port 25 (thanks for telling us). A little powershell magic and we are up and running again.
-
@RojoLoco said in What Are You Doing Right Now:
FINALLY got our Exchange server to send emails again... New ISP blocks port 25 (thanks for telling us). A little powershell magic and we are up and running again.
Ugh, that sucks.
-
@scottalanmiller said in What Are You Doing Right Now:
@RojoLoco said in What Are You Doing Right Now:
FINALLY got our Exchange server to send emails again... New ISP blocks port 25 (thanks for telling us). A little powershell magic and we are up and running again.
Ugh, that sucks.
I was very near the point of attempting physical assault on a server.
-
Get out there and give @nic some love.
-
@scottalanmiller said in What Are You Doing Right Now:
Get out there and give @nic some love.
He's kicking some ass so far.
Just like Webroot.
-
@scottalanmiller said in What Are You Doing Right Now:
@RojoLoco said in What Are You Doing Right Now:
FINALLY got our Exchange server to send emails again... New ISP blocks port 25 (thanks for telling us). A little powershell magic and we are up and running again.
Ugh, that sucks.
How did a script save this? You sending out a non standard port now? How do you receive email?
-
Finished setting up a Zabbix server vm following @JaredBusch's guide.
-
I have 3-5 hours of trainings/meetings every single day this week. I have no idea how I'm supposed to do my job at all.
-
@Dashrender said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@RojoLoco said in What Are You Doing Right Now:
FINALLY got our Exchange server to send emails again... New ISP blocks port 25 (thanks for telling us). A little powershell magic and we are up and running again.
Ugh, that sucks.
How did a script save this? You sending out a non standard port now? How do you receive email?
We were receiving external mail just fine. After switching our ISP on Friday, we could no longer send on port 25. ISP support lets us know they block all port 25 traffic, so I used PS (well, Exchange Management Shell) to change the port number to 2525. It was just 2 commands:
Get-SendConnector -Identity "SENDCONNECTORNAME" | fl
Set-SendConnector -Identity "SENDCONNECTORNAME" -port 2525
All inbound stuff remains unchanged.
-
@RojoLoco said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@RojoLoco said in What Are You Doing Right Now:
FINALLY got our Exchange server to send emails again... New ISP blocks port 25 (thanks for telling us). A little powershell magic and we are up and running again.
Ugh, that sucks.
How did a script save this? You sending out a non standard port now? How do you receive email?
We were receiving external mail just fine. After switching our ISP on Friday, we could no longer send on port 25. ISP support lets us know they block all port 25 traffic, so I used PS (well, Exchange Management Shell) to change the port number to 2525. It was just 2 commands:
Get-SendConnector -Identity "SENDCONNECTORNAME" | fl
Set-SendConnector -Identity "SENDCONNECTORNAME" -port 2525
All inbound stuff remains unchanged.
Could you wind up with any long term effects caused by this?
-
@Dashrender said in What Are You Doing Right Now:
@RojoLoco said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@RojoLoco said in What Are You Doing Right Now:
FINALLY got our Exchange server to send emails again... New ISP blocks port 25 (thanks for telling us). A little powershell magic and we are up and running again.
Ugh, that sucks.
How did a script save this? You sending out a non standard port now? How do you receive email?
We were receiving external mail just fine. After switching our ISP on Friday, we could no longer send on port 25. ISP support lets us know they block all port 25 traffic, so I used PS (well, Exchange Management Shell) to change the port number to 2525. It was just 2 commands:
Get-SendConnector -Identity "SENDCONNECTORNAME" | fl
Set-SendConnector -Identity "SENDCONNECTORNAME" -port 2525
All inbound stuff remains unchanged.
Could you wind up with any long term effects caused by this?
AFAIK the only long term effect will be being able to send mail to external domains. But I suppose time will tell...
-
@Dashrender said in What Are You Doing Right Now:
@RojoLoco said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@RojoLoco said in What Are You Doing Right Now:
FINALLY got our Exchange server to send emails again... New ISP blocks port 25 (thanks for telling us). A little powershell magic and we are up and running again.
Ugh, that sucks.
How did a script save this? You sending out a non standard port now? How do you receive email?
We were receiving external mail just fine. After switching our ISP on Friday, we could no longer send on port 25. ISP support lets us know they block all port 25 traffic, so I used PS (well, Exchange Management Shell) to change the port number to 2525. It was just 2 commands:
Get-SendConnector -Identity "SENDCONNECTORNAME" | fl
Set-SendConnector -Identity "SENDCONNECTORNAME" -port 2525
All inbound stuff remains unchanged.
Could you wind up with any long term effects caused by this?
Not from any properly configured email server. They'll continue to retry for up to a month. The system was designed for email servers to not be reliable/online.
-
it's possible that a receiving email server could be setup to not accept email coming from a non standard port. This seems highly unlikely, but possible.
A thought that someone might have is, only someone trying to use a consumer class internet connection would be trying to send email out a port other than port 25, therefore anyone who tries to connect on my port 25 from a port other than 25 will be blocked.
This is kinda crazy and leaves so much room for problems, but it's completely possible.
-
@Dashrender said in What Are You Doing Right Now:
it's possible that a receiving email server could be setup to not accept email coming from a non standard port. This seems highly unlikely, but possible.
Hadn't really considered that. Our 2 choices were 2525 or 587, and since we were scrambling, the idea of the nonstandard port getting booted at the other end slipped our minds. I'll keep an eye out, but I'm fairly sure it won't be an issue since we route through a smart host.
-
@RojoLoco said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
it's possible that a receiving email server could be setup to not accept email coming from a non standard port. This seems highly unlikely, but possible.
Hadn't really considered that. Our 2 choices were 2525 or 587, and since we were scrambling, the idea of the nonstandard port getting booted at the other end slipped our minds. I'll keep an eye out, but I'm fairly sure it won't be an issue since we route through a smart host.
aww.. well, then as long as your smart host is working, you should be fine.
Though I have to ask - you have a business class connection that blocks your ability to use a port? WTF? And you're not freaking out on them?
Is it in their contract that you'll send all outgoing email through their servers? Talk about your Man-in-the-Middle!
-
Making plans to attend calling hours for a friend this week. He died Saturday. He was possibly as young as 25, but was probably 26. He had a heart attack and died. My girl and I both knew him pretty well and were both friends with him but for totally independent reasons...it's been a rough weekend...
-
@thanksajdotcom That really sucks. Im sorry for your loss
-
@thanksajdotcom said in What Are You Doing Right Now:
Making plans to attend calling hours for a friend this week. He died Saturday. He was possibly as young as 25, but was probably 26. He had a heart attack and died. My girl and I both knew him pretty well and were both friends with him but for totally independent reasons...it's been a rough weekend...
Oh wow, that really sucks
Sorry for your loss.
