@tim_g said in Jared Busch: VoIP:

@scottalanmiller said in Jared Busch: VoIP:

@bigbear said in Jared Busch: VoIP:

@scottalanmiller said in Jared Busch: VoIP:

@bigbear said in Jared Busch: VoIP:

@scottalanmiller said in Jared Busch: VoIP:

@stuartjordan said in Jared Busch: VoIP:

@jaredbusch This sounds cool, was there quite a few videos to be uploaded?

In theory, quite a lot.

Looking forward still to my first mangocon...

You’ve got a little bit to wait for that.

Summer 2018?

Spring 2019, Dallas

Perhaps around a national holiday so my daughter has off school and I can make it a family trip to Dallas?

May is the guess.

@scottalanmiller So since I posted the OP, I found out what the issue was. (or at least eliminated it by changing a setting.) On old versions of FreePBX, in Advanced SIP settings, in order to enable TCP connections, you had to manually type:

tcpenable =yes

In new versions, there is now a button to enable TCP. Having both settings enabled seems to cause these issues. Most likely, the config file for sip.conf gets messed up having these similar/identical settings. Removing the old entry eliminates the errors.

Someone might have talked about fail2ban somewhere recently.

@thwr said in MC16: VoIP with Jared Busch Session:

@JaredBusch said in MC16: VoIP with Jared Busch Session:

@scottalanmiller said in MC16: VoIP with Jared Busch Session:

@JaredBusch said in MC16: VoIP with Jared Busch Session:

@thwr said in MC16: VoIP with Jared Busch Session:

@scottalanmiller said in MC16: VoIP with Jared Busch Session:

Myths of VoIP:

No 911 Is not secure Requires dedicated Internet Needs special network configuration have to buy all new hardware (or any new hardware!)

Seriously? ...

Serious that those are myths of VOIP? yup. I hear those all the time.

Same here.

@thwr Just happened last night in fact when i gave a presentation to a SpiceCorp.

Really sad. But there are so many myths (and half-knowledge) in and around IT...

Seems to be the majority more often than not 😞

@RamblingBiped said in SIP Phone registers no audio...:

Here is the guide I followed to get the Yealink T23G to work with OpenVPN: http://www.sunstatetechnology.com/docs/YealinkOpenVPNGuide.pdf

When I disable NAT on the extension the phone is unable to register.

Something is wrong there, that sounds like the VPN is not working as there is no NAT when there is a VPN.

@JaredBusch said in FreePBX 13 Endpoint Manager problem:

And the issue is now resolved
0_1474664475114_upload-694777ca-7f24-49f9-9c23-12dc68afd8a3

Glad to hear it. No better way to kick off a weekend!

@scottalanmiller said in PBX Update routines:

@fuznutz04 said in PBX Update routines:

I've seen that you can do it via a command, which of course could be scheduled, but I'm always Leary of that with FreePBX.

sudo -u asterisk /var/lib/asterisk/bin/module_admin upgradeall
sudo -u asterisk /var/lib/asterisk/bin/module_admin reload

That's the module part. Don't forget the OS, too.

Right. The OS part (at least in FreePBX) can be set for automatic updates via the GUI in System Admin.

@wirestyle22 said in FreePBX Remote Extension Problems:

@scottalanmiller said in FreePBX Remote Extension Problems:

@wirestyle22 said in FreePBX Remote Extension Problems:

@RamblingBiped Hope this is the solution. I unfortunately have Cisco CM and its my first time managing VoIP

So sorry.

Complication for the sake of complication

And spending money for the sake of throwing away profits 😉

@scottalanmiller said in Reset Admin Password on FreePBX from the Command Line:

mysql -D asterisk -e "UPDATE ampusers SET password_sha1='e1edd0771b6345f00b5557b98b2bde8fd66744c5' WHERE username='admin'"

Why on earth do you give an instruction with a hash in it?

Why not use the MySQL SHA1() function?

mysql -D asterisk -e "UPDATE ampusers SET password_sha1=SHA1('CHANGEME') WHERE username='admin'"

@scottalanmiller said in FreePBX External/Remote Extensions:

@JaredBusch said in FreePBX External/Remote Extensions:

@RamblingBiped said in FreePBX External/Remote Extensions:

Option #1 up and running. Now to work on the OpenVPN part of the equation... 🙂

I have set this up but then ran into the problem of the OpenVPN port being blocked. Slightly hard to change once out in the wild.

On which end?

The remote end obviously. As I have full control of the server side.

@scottalanmiller said in 8 port FXO gateway needed:

@JaredBusch said in 8 port FXO gateway needed:

The unit worked perfectly for 2 years (June 2018). At that time it was honorably retired as the site was able to get a solid fiber connection thanks to @Phil-CommQuotes.

Good reminder, I needed to email him today!

I'm here to help! Let's talk!

Added: https://mangolassi.it/topic/9519/voip-pstn-gateways

@scottalanmiller said in Elastix login page gives error HTTP ERROR 500 when login:

@dbeato said in Elastix login page gives error HTTP ERROR 500 when login:

@denny said in Elastix login page gives error HTTP ERROR 500 when login:

systemctl stop firewalld disable selinux find /var/www/html/var/ -type d -exec chmod 755 {} ; find /var/www/html/var/ -type f -exec chmod 755 {} ;

🙂

Way to necro a post, security and firewall ar of the upmost importance. No system ever needs to be setup open this way....

I think that he was being tongue in cheek.

Okay, I didn't get it LOL

Yeah, that's a really awesome feature.

Looks like that one is working, thanks.

@Jason said in One way audio on an IAX2 trunk:

Also did you add the network for the remote site in asterisk?

Found this topic again after checking the IAX2 tag.

Thought I would update with the answer.

This was the problem

Very nice.