FreePBX 14 Fails with Update to Asterisk 16

CCWTech

Mine did that as well. I did this:

Try from SSH

fwconsole ma upgradeall
fwconsole reload

And it resolved it.

As per https://community.freepbx.org/t/rconffail-retrieve-conf-failed-config-not-applied/47699

JaredBusch

@CCWTech said in FreePBX 14 Fails with Update to Asterisk 16:

Mine did that as well. I did this:

Try from SSH

fwconsole ma upgradeall
fwconsole reload

And it resolved it.

As per https://community.freepbx.org/t/rconffail-retrieve-conf-failed-config-not-applied/47699

That has nothing to do with switching Asterisk versions.

CCWTech

@JaredBusch said in FreePBX 14 Fails with Update to Asterisk 16:

@CCWTech said in FreePBX 14 Fails with Update to Asterisk 16:

Mine did that as well. I did this:

Try from SSH

fwconsole ma upgradeall
fwconsole reload

And it resolved it.

As per https://community.freepbx.org/t/rconffail-retrieve-conf-failed-config-not-applied/47699

That has nothing to do with switching Asterisk versions.

Just reporting what worked for me.

scottalanmiller

Customer system went to Asterisk 16 with no issues.

bnrstnr

The FreePBX installer still recommends Asterisk 13, do you guys always run the current version?

scottalanmiller

@bnrstnr said in FreePBX 14 Fails with Update to Asterisk 16:

The FreePBX installer still recommends Asterisk 13, do you guys always run the current version?

More or less, yeah. I've found 13 to be a poor choice, 15 worked a bit better. Now that 16 is out, seems like the way to go. It's an LTS release, so while I'm not big on sticking to LTS releases, they are definitely the best option when they are both LTS and current at the same time.

bnrstnr

Not to hijack this thread, but is there a specific upgrade path to get from 13 to 16? Do I need to hit all releases between?

scottalanmiller

@bnrstnr said in FreePBX 14 Fails with Update to Asterisk 16:

Not to hijack this thread, but is there a specific upgrade path to get from 13 to 16? Do I need to hit all releases between?

No need to go step by step. At least not normally. Just issue the switch command and pick the version that you want to go to. You can go up or down at will.

scottalanmiller

@CCWTech said in FreePBX 14 Fails with Update to Asterisk 16:

Mine did that as well. I did this:
Try from SSH
fwconsole ma upgradeall
fwconsole reload
And it resolved it.

Did that, but no change. Same error.

scottalanmiller

Gives this error as well:

fclose(): 111 is not a valid stream resource

scottalanmiller

Okay, we got it. Doing the switch, then the fwconsole update, then rebooting, and running through it all again... eventually it fixed itself.