NAS for VMWare 5.5 backups from Veeam
-
I would think that for that a two bay, Synology 214 or ReadyNAS, doing NFS, would be idea. Use 3TB+ drives, a pair, in RAID 1. Cheap, highly reliable, super simple.
-
http://www.amazon.com/ReadyNAS-diskless-Attached-generation-RNDU6000/dp/B003V8AL98
But does look like no longer being made...
My case was I didn't even care about it being the ProSeries The Home Version worked fine and saved additional $$s (next one however will probably be the Pro Series)still around.. but also the Duo for his case makes perfect sense...
The free veeam will connect over SMB protocols so it won't even utilize NFS will it? still even going over CIFS/SMB I am getting some prett good speeds ~90mbit (at the highest)
-
For a backup target, AD is definitely overkill.
-
@BC said:
The free veeam will connect over SMB protocols so it won't even utilize NFS will it? still even going over CIFS/SMB I am getting some prett good speeds ~90mbit (at the highest)
NFS will connect at the hypervisor level as a datastore though. So the windows VM that I have Veeam in will just see it as a drive that way. I can test it both ways I guess.
-
awesome...
my veeam is running on a physical host and haven't played with much more than making sure it runs...Will have to check those settings
-
When I setup Veeam, I use a Synology as the NFS datastore. The performance is good, the device is well-built for the price, and the DS412+ is on the VMware HCL. As a multipurpose device, you can also use it for misc. storage, or even give it some of your VM workload. Where are your replicas going currently, to the opposite host?
-
I forgot to mention... One trick is to use NFS and plop a replica of the Veeam server on the device as well. That way, should your hosts fail, you're ready-to-recover with basically any ESXi host with no messing around. Mount the datastore, spin up the VM, and Veeam's ready to rumble. Add 2 drives when needed to create another volume, and you can even do the restore and temporarily run your workload (albeit IOPS-bound) on the Synology.
-
Ok so a client just bought Veeam and a rack mount Buffalo Terastation.
I will be backing up two Hyper-V hosts. I am configuring the NAS today is there recommended share format to use? NFS, SMB, etc.
-
I'm using a ReadyNAS 316 using my Veeam.
-
Coming back to this. Wow time is getting away form me and I am leaving billable work on the table too long.
I have Veeam installed on a physical workstation. I have the NAS in the rack with everything else.
How should I configure this in Veeam Backup Respository section? CIFS/SMB or NFS? Will I get better performance with one method over another?
-
CIFS and NFS should be pretty close on a LAN. I'd prefer NFS in most cases. Unless you need CIFS features, NFS is a little more efficient and robust.
-
@scottalanmiller well I just tried to set this up and failed, but I did not read any instructions, just clicked through menus. I will break our the manual this afternoon and try agaiN.
