Ubiquiti Switches
-
@Carnival-Boy said:
I've never been cold-called by Netgear whereas in the last 10 years I've been cold-called by Cisco 5,654 times.
We don't get cold called by Cisco. There enterprise stuff isn't really something they cold call on, where they make their money is the SMB lines anyway. Where SMBs think they need Cisco but get sold absolute junk with a Cisco logo on it. The SMB lines at Cisco has done them a major disservice in brand image while making them a lot of money.
-
@scottalanmiller said:
@Breffni-Potter said:
Netgear boxes have given me a bit of grief. I like the dumb un-managed ones, but the managed switches & a few other boxes have been a bit of a mare.
We never use their managed, but their unmanaged and smart have been very good.
We have a few M4100 switches and have been rock solid for a while now. But thinking of switching to Edge Switches on the next purchase.
-
@Jason said:
@Carnival-Boy said:
I've never been cold-called by Netgear whereas in the last 10 years I've been cold-called by Cisco 5,654 times.
We don't get cold called by Cisco. There enterprise stuff isn't really something they cold call on, where they make their money is the SMB lines anyway. Where SMBs think they need Cisco but get sold absolute junk with a Cisco logo on it. The SMB lines at Cisco has done them a major disservice in brand image while making them a lot of money.
Yes, it's made Cisco look like a total joke. Even those of us who have never used it outside of the enterprise hear the name and laugh. The issues with their UCS stuff didn't help them any, either.
-
I just purchased my ERX and an AP-AC-LR for home. It was troublesome to setup at first until I realized that eth0 was meant for WAN (I was trying to setup eth1) Once I got that, everything fell into place and I am super happy so far. Got zoneedit for DDNS setup and the AP is using the POE passthrough. This setup blows my old Asus RN66U out of the water. And it is cheaper.
-
@wrx7m said:
I just purchased my ERX and an AP-AC-LR for home. It was troublesome to setup at first until I realized that eth0 was meant for WAN (I was trying to setup eth1) Once I got that, everything fell into place and I am super happy so far. Got zoneedit for DDNS setup and the AP is using the POE passthrough. This setup blows my old Asus RN66U out of the water. And it is cheaper.
Why the LR? those are nothing but marketing. You gain no real benefits from it as the increased transmit power does jack to help the device in your hand transmit BACK at a long range.
-
@JaredBusch said:
@wrx7m said:
I just purchased my ERX and an AP-AC-LR for home. It was troublesome to setup at first until I realized that eth0 was meant for WAN (I was trying to setup eth1) Once I got that, everything fell into place and I am super happy so far. Got zoneedit for DDNS setup and the AP is using the POE passthrough. This setup blows my old Asus RN66U out of the water. And it is cheaper.
Why the LR? those are nothing but marketing. You gain no real benefits from it as the increased transmit power does jack to help the device in your hand transmit BACK at a long range.
- Better signal quality (less noise / effected by noise)
- Less packet loss
- faster TX speed
- better reflection / bounce
- coffee mug warms up faster when sitting on it
-
@MattSpeller said:
@JaredBusch said:
@wrx7m said:
I just purchased my ERX and an AP-AC-LR for home. It was troublesome to setup at first until I realized that eth0 was meant for WAN (I was trying to setup eth1) Once I got that, everything fell into place and I am super happy so far. Got zoneedit for DDNS setup and the AP is using the POE passthrough. This setup blows my old Asus RN66U out of the water. And it is cheaper.
Why the LR? those are nothing but marketing. You gain no real benefits from it as the increased transmit power does jack to help the device in your hand transmit BACK at a long range.
- Better signal quality (less noise / effected by noise)
- Less packet loss
- faster TX speed
- better reflection / bounce
- coffee mug warms up faster when sitting on it
I will admit that my response is based on the specs comparing the UAP and UAP_LR not the new AC models. The UAP and UAP-LR were the same thing simply with more TX power on the UAP-LR
-
@JaredBusch said:
@MattSpeller said:
@JaredBusch said:
@wrx7m said:
I just purchased my ERX and an AP-AC-LR for home. It was troublesome to setup at first until I realized that eth0 was meant for WAN (I was trying to setup eth1) Once I got that, everything fell into place and I am super happy so far. Got zoneedit for DDNS setup and the AP is using the POE passthrough. This setup blows my old Asus RN66U out of the water. And it is cheaper.
Why the LR? those are nothing but marketing. You gain no real benefits from it as the increased transmit power does jack to help the device in your hand transmit BACK at a long range.
- Better signal quality (less noise / effected by noise)
- Less packet loss
- faster TX speed
- better reflection / bounce
- coffee mug warms up faster when sitting on it
I will admit that my response is based on the specs comparing the UAP and UAP_LR not the new AC models. The UAP and UAP-LR were the same thing simply with more TX power on the UAP-LR
To be fair you're right to be sceptical, just pumping more juice through the radio will actually make things worse lots of the time. I'm making the assumption that they were designed to handle it. I don't think that is an unreasonable one.
Also - yeah it really is just upping the TX power, I forget the exact specs but it was ~30% or better IIRC
If someone wanted to hack their firmware I'd bet you could take a normal one and bump it to get an LR one.
-
@MattSpeller @JaredBusch In all honesty, I got the LR because it was the one that was in stock and was only a few bucks more. Is it that much better in terms of signal range? Probably not, but I was really tired of my old setup and I am happy with this one.
-
@wrx7m said:
@MattSpeller @JaredBusch In all honesty, I got the LR because it was the one that was in stock and was only a few bucks more. Is it that much better in terms of signal range? Probably not, but I was really tired of my old setup and I am happy with this one.
I did the same thing... needed one next day and that was the only one from Prime available at the time.
-
@brianlittlejohn Yeah these things are in short supply. The ERX is $10-$15 more than MSRP, IF you can find it in stock.
-
@brianlittlejohn said:
@wrx7m said:
@MattSpeller @JaredBusch In all honesty, I got the LR because it was the one that was in stock and was only a few bucks more. Is it that much better in terms of signal range? Probably not, but I was really tired of my old setup and I am happy with this one.
I did the same thing... needed one next day and that was the only one from Prime available at the time.
We seem to have them up here no problem
-
Last week, when I checked, there were varying ETA dates for amazon, newegg (US) and other sites I checked.
-
@MattSpeller said:
@brianlittlejohn said:
@wrx7m said:
@MattSpeller @JaredBusch In all honesty, I got the LR because it was the one that was in stock and was only a few bucks more. Is it that much better in terms of signal range? Probably not, but I was really tired of my old setup and I am happy with this one.
I did the same thing... needed one next day and that was the only one from Prime available at the time.
We seem to have them up here no problem
I needed it back in June, NewEgg had them in stock then, but I have had issues getting stuff next day from them, so I went with what I could get from Amazon Prime.
-
Newegg is good to southern California. Unless it comes from TN or another warehouse, even the ghetto shipping option will get here next day. As far as I can tell, you won't know which warehouse until after it ships.
-
@wrx7m said:
Newegg is good to southern California. Unless it comes from TN or another warehouse, even the ghetto shipping option will get here next day. As far as I can tell, you won't know which warehouse until after it ships.
If I was ordering it earlier in the day, I may would have risked it... but it was 3:00pm and needed it the next day. I was at a satellite office and they failed to tell me they were having wifi issues before I went out there.
-
@brianlittlejohn When in doubt, prime overnight.
-
Just ordered one for internal use for a bit. Going to use it in anger and see how it holds up
If it does not, well return to sender.
-
It arrived. Works out of the box nicely.
Just upgrading firmware now.
-
VOIP does not work out of the box at all
Really bad call quality issues.
